• Journal of Gastric Cancer
• /
• v.5 no.4 s.20
• /
• pp.288-294
• /
• 2005

Purpose: Superficially spreading (SS) early gastric cancer (EGC) is characterized by wide horizontal extension without deep vertical invasion. It is a relatively rare form of EGC, and it's clinicopathological (C-P) characteristics are not evident. This study aimed to clarify their C-P characteristics. Materials and Methods: We defined SS EGC as invading less than the submucosal layer that measured more than 60 mm in diameter or wider than $5{\times}5cm \;(25cm^2)$ in width. The C-P characteristics and prognosis were compared between 69 patients with SS EGC and 319 patients with the common type EGC (EGC except SS type). Results: For SS EGC lymph node metastases, Lauren's diffuse type, lymphatic invasion were significantly higher than in common type EGC. In patients with SS EGC, all of the metastatic lymph nodes were anatomically distributed within the paragastric region, with fewer along the left gastric artery and common hepatic artery. In 6 cases of SS EGC with resection marqins less than 10 mm, there was no death during the follow-up period (4 to 13 years after operation) if margins were not involved. Age (>58 yrs), tumor site (upper 1/3), lymph node metastasis, submucosal invasion were statistically significant poor prognostic factor in univariate survival analysis. In multivariate survival analysis, age and lymph node metastasis were independent prognostic factors. However, tumor diameter or width was not a significant prognostic factor. Conclusion: Although SS EGC has histologically distinct properties, gastrectomy with free surgical margins and appropriate lymph node dissection $(D1+{\beta})$ could be a suitable treatment.

• Journal of agricultural medicine and community health
• /
• v.29 no.1
• /
• pp.133-145
• /
• 2004

Objectives: Depression is a major health concern that can be life threatening if not recognized and treated early. However, there is few report on the depressive disorder of Hansen disease patients in Korea. Therefore, the authors executed this study in order to check factors related to a depressive disorder of a Hansen disease patients and compare with factors to reach to a depressive symptoms of ordinary people with studying their life state and the trouble that Hansen disease patients were currently experiencing Method: The authors surveyed depressive symptoms using self-reported questionnaires in 74 Hansen disease patients and 84 controls. The severity of depressive symptoms was measured using Korean Form of Geriatric Depression Scale (KGDS) score. Result: Positive rate of depressive disorders among Hansen disease patients was 70.3% and that the referents was 31.0%. There is significant difference positive rate of depressive disorders between Hansen disease group and the referents in the factors such as gender, age, frequency of going out, familial type, and familial income. Depressive disorder of Hansen disease group was associated with sex, familial income. According to the multiple logistic regression, the odds ratios of the Hansen disease group versus referents, gender, familial income, frequency of going out were significant (p<0.05). Conclusion: Hansen disease patients had statistically significant higher depressive symptom score than the referents. Also, Hansen disease patients who have lower familial income were more likely to have depressive disorders. Therefore, Economical supports and policy are required for the Hansen disease patients.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.193-199
• /
• 1998

The mixtures of ultra-high molecular weight polythylene (UHMWPE), high density polyethylene (HDPE), process oil (mineral oil) and potassium hexatitanate whisker were melted and mixed at $150^{\circ}C$ for 30min, and prepared by compression molding to the specimen of separator of about $200{\mu}m$ thickness at the same temperature and 5000 psi. Thereafter the pores were formed by extracting process oil with organic solvents. In this study, the range of PR (the ratio polymer to process oil) was varied from 0.1 to 0.5 because the specimen turned into rubbery phase at which PR was below 0.1 whereas it changed into gel phase at which PR was above 0.5. When the specimen was treated with nonpolar organic solvents, process oil was extracted nearly 98%. Tensile strength was $31kg/cm^2$ at PR = 0.426, and resistance of specimen was $37m{\Omega}/cm^2$ at PR = 0.186, and $53m{\Omega}/cm^2$ at PR = 0.426. The $N_2$ adsorption-desorption isotherm showed a hysteresis representing regions of capillary condensation, and the surface area at PR = 0.186 was relatively large as $130cm^2/g$. Potassium hexatitanate whisker was randomly dispersed in between PE layers. It might be that the whisker is intercalated through the PE thin layers oriented by compression.

• Resources Recycling
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2013

This study was carried out to evaluate the possibility of resource recovery for municipal solid waste(MSW) that sorted by a MBT system. First, physical property of MSW was similar to wastes carried into Sudokown landfill site. However, moisture of MSW was little higher than that. As a result of BMP test using organic fraction of MSW(OFMSWs), approximately 60 ~ 80 mL $CH_4/g$-VS of methane was occurred. Compared to the other studies, the value of methane is lower. It seems to be caused that high ratio of vinyl/plastic in OFMSWs. The other BMP test using sample of MBT system located in Sudokwon landfill was conducted each physical properties. According to the result of experiment, food waste makes 193 mL $CH_4/g$-VS, and paper is 102 mL $CH_4/g$-VS. However, there was not methane production in vinyl and rubber. Additionally, others that can't sort no more show 30 m $CH_4L/g$-VS of methane production. From the result of experimental data OFMSWs has high fraction of vinyl, rubber and other substance that difficult for biodegradation. Therefore it is need to sort of them.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.9-14
• /
• 2009

In this research, a polyester manufacturing company (i.e. K Co.) in Gumi, South Korea was investigated regarding the release of high concentrations of 1,4-dioxane(about 600 mg/L) and whether treatment prior to release should occur to meet with the level of the regulation standard (e.g., 5 mg/L in 2011). The pilot-scale (reactor volume, 10 $m^3$) treatment system using Photo-Fenton Oxidation was able to remove approximately 90% of 1,4-dioxane under the conditions that concentrations of 2,800 ppm $H_2O_2$ and 1,400 ppm $FeSO_4$ were maintained along with 10 UV-C lamps (240 ${\mu}W/cm^2$) illuminated during aeration. However, the effluent concentration of 1,4-dioxane was still high at about 60 mg/L. Thus, further investigation is needed to see whether the bench scale (reactor volume, 8.9 L) of activated sludge could facilitate the decomposition of 1,4-dioxane. As a result, 1,4-dioxane in the effluent has been decreased as low as about 2~3 mg/L. Consequently, Photo-Fenton Oxidation coupled with activated sludge process can make it possible to efficiently decompose 1,4-dioxane to keep up with that of the regulation standard.

• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.252-257
• /
• 2005

A high-brightness electron beam source for a microfocus X-ray tube has been fabricated using a carbon-nanotube (CNT) field emitter. The electron source consists of cathode that includes a CNT field emitter, a beam-extracting grid, and an anode that accelerates that electron beam. The microfocus X-ray tube requires an electron beam with the diameter of less than 5 $\mu$m and beam current of higher than 30 $\mu$A at the position of the X-ray target. To satisfy the requirements, the geometries of the field emitter tips and the electrodes of the gun was optimized by calculating the electron trajectories and beam spatial profile with EGUN code. The CNT tips were fabricated with successive steps: a tungsten wire with the diameter of 200 $\mu$m was chemically etched and was subsequently coated with CNTs by chemical vapor deposition. The experiments of electron emission at the fabricated CNT tips were performed. The design characteristics and basic experimental results of the electron source are reported.

• Clean Technology
• /
• v.29 no.3
• /
• pp.217-226
• /
• 2023

The amount of hydrogen adsorbed in arrays of single walled carbon nanotubes (SWNTs) was studied as a function of nanotube diameter and distance between the nearest-neighbor nanotubes on square arrangements using a grand canonical Monte Carlo simulation. The influence of the geometry of a triangle array with the same diameters and distances was also studied. Hydrogen-carbon and hydrogen-hydrogen interactions were modeled with Lennard-Jones potentials for short range interactions and electrostatic interactions were added for hydrogen-hydrogen pairs to consider quantum contributions at low temperatures. At 194.5 K, Type I isotherms for large-diameter SWNTs and Type IV isotherms without hysteresis between adsorption and desorption processes for wider tube separations were observed. At 200 bars, the gravimetric hydrogen storage capacity of the SWNTs was reached or exceeded the US Department of Energy (DOE) target, but the volumetric capacity was about 70% of the DOE target. At 77 K, a two-step adsorption was observed, corresponding to a monolayer formation step followed by a condensation step. Hydrogen was adsorbed first to the inner surface of the nanotubes, then to the outer surface, intratubular space and the interstitial channels between the nanotube bundles. The simulation indicated that SWNTs of various diameters and distances in a wide range of configurations exceeded the DOE gravimetric and volumetric targets at under 1 bar.

• Korean journal of applied entomology
• /
• v.25 no.3 s.68
• /
• pp.159-167
• /
• 1986

White tip nematode damage to rice was surveyed at 111 $My{\check{o}}n$ from 36 Gun in Kyongsangnam-Do, $Ky{\check{o}}ngsangbuk-Do\;and\;Ch{\check{o}}llanam-Do$. Rate of damaged stem by the nematode was highest at $Ch'angny{\check{o}}ng-Gun\;in\;Ky{\check{o}}ngsangnam-Do$ as 28.3%, $Y{\check{o}}ngch'on-Gun\;in\;Ky{\check{o}}ngsangbuk-Do$ as 69.3% and $Pos{\check{o}}ng-Gun\;in\;Ch{\check{o}}llanam-Do$ as 40.6%. In pot experiment, no white tip symptoms were appeared in Tongil hybrids except $W{\check{o}}np'ung$ by 3.4% but a great number of the nematode was detected in seeds while symptom and a fair amount of the nematode were observed in Japonica cultivars. The number of nematode in Shingwang cultivar of Tongil hybrids and Dongin cultivar of Japonica was highest by 1997, by 1023 individuals per 10g of seed respectively. Detection rate of the nematode was different depended upon peeling of the husks. Less than 50% was detected from unhulling seed compared with hulled seed except 8 cultivars such as $Shins{\check{o}}nchal$, Hangangchal, $S{\check{o}}gwang,\;Y{\check{o}}ngpung$, Milyang 23, $Such{\check{o}}ng,\;Taech'{\check{o}}ng\;and\;S{\check{o}}nam$. More effective detection was oftained with temperature level at $25^{\circ}C$ and increased with immersing time regardless of peeling the husks.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.