• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.625-630
• /
• 2014

연료전지의 성능을 결정짓는 가장 중요한 변수 중의 하나는 각 스택의 채널에 얼마나 균일하게 연료를 공급할 수 있느냐이다. 본 연구에서는 네 가지의 모델을 사용하여 연료전지 매니폴드 형상에 따른 최적 설계를 수행하였다. 위 네 가지 모델은 각기 다른 기하학적 형상을 가지며 Edison CFD를 이용하여 형상 내의 유동을 비교하였다. 초기 모델에서는, 입구부에서 매니폴드로 유입되는 유동의 확산이 잘 일어나지 않아 각 채널의 질량유량이 불균일한 분포를 보였으며 특히 속도가 빠른 중심 영역의 채널에 많은 연료가 유입되었다. 이를 위한 디퓨져 모델링이 제안되었으며 실속이 최소한도로 발생할 때 채널당 질량유량이 가장 균일하다고 가정하였다. 이를 위해 다양한 디퓨져 각을 가진 모델을 사용했고, 이론상으로 실속이 발생하지 않는 형상에서 가장 균일한 분포를 보임을 확인하였다.

• Explosives and Blasting
• /
• v.33 no.2
• /
• pp.25-39
• /
• 2015

The common underwater rock removal methods involve underwater blasting and crane's chisel dropping impact method. From an environmental point of view, these methods cause ground vibrations and underwater noise. At the site for this study, a method of dropping heavyweight chisel is selected to remove the underwater bedrock near the ferry rack in the course of improving the cargo handling ability of the loading dock. A prediction formula for the vibration was obtained based on the measurement and evaluation of the vibrations caused by the chisel dropping impacts during the test droppings. The prediction formula was successfully applied to the main construction for securing the stability of the structure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.353-356
• /
• 2008

This study was performed to estimate the dynamic behavior for Bi Prestressed Concrete Girder(Bicon girder) which could introduce effectively prestressed forces into concrete girders. Dynamic behavior of PSC girder must be verified because it becomes not only slim but also long and a railway bridge which loaded regularly has risk of resonance especially. Forced vibration test using a vibration machine was executed for 20m railway bridge girder specimen to acquire dynamic characteristics(natural frequency, damping ratio) and test results showed the natural frequency of 6.632Hz and the damping ratio of 1.43%

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.423-431
• /
• 2013

The k-factor method has been widely used in design of steel-concrete composite bridges to determine indeterminate stresses. The accuracy of k-factor method is examined by a comparative analysis with the equivalent load method in a continuous 2-span composite bridge. To improve the accuracy, the direction of creep stress has to be modified and the variety of section must be considered. This paper suggests j-factor method which can improve the accuracy of k-factor method with simple modification.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.228-236
• /
• 2000

The preparation of organophilic clay from Na$^{+}$-MMT was achieved by intercalation of alkylammonium bromide. The dispersed organophilic clay in NMP was then added to the solution of polyamic acids (BPDA-PPD, BTDA-ODA/ MPD) in NMP. After curing at 30$0^{\circ}C$, thin films of the polyimide/clay nanocomposite were prepared. The results of X-ray diffraction (XRD) shelved that the d-spacings of dried polyamic acid (PAA)-clay complexes increased in proportion to the chain length of the onium ion and patterns of two kinds of PAA-clay complexes were similar. The d-spacings of approximately 13.2 $\AA$ for the polyimide/clay nanocomposites were independent of the initial onium ion chain length and the species of PAA. From the study of XRD and transmission electron microscopy (TEM), we found layered silicates were dispersed in polyimide matrix and the resultants were intercalated nanocomposites. TGA result showed thermal stability of polyimide nanocomposite improved a little more than the pure polyimide. From the result of dynamic mechanical property, we found that the storage modulus of the nanocomposites had increased by 1.2-1.8 times of the pure polyimides.s.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.357-360
• /
• 2008

This study was performed to estimate the workability and the static behavior for Bi Prestressed Concrete Girder(Bicon girder) which could introduce effectively prestressed forces into concrete girders. A bicon girder is manufactured by means of introducing pure bending moment that prestress simultaneously the compressive member(steel bar) and the tensile member(steel tendon). Static test was executed for 20m railway bridge girder specimen and evaluated whether pure bending moment was introduced or not, and the behaviors after cracking, and at the ultimate load. Test results showed that a bicon girder had the enough safety in the introduction of pure moment, the serviceability, and the ultimate behavior.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.361-364
• /
• 2008

This study was performed to estimate the anchorage behavior for Bi Prestressed Concrete Girder(Bicon girder) which could introduce effectively prestressed forces into concrete girders. A bicon girder is manufactured by means of introducing pure bending moment that prestress simultaneously the compressive member(steel bar) and the tensile member(steel tendon). Therefore, the steel bar and the steel tendon must be unified in both ends and compressive and tensile force be offset. Anchorage dimension of 6 test specimens was designed under PTI specification which defined maximum stress and deformation to estimate structural behavior. Test results showed that the stress and the deformation of anchorage were within limits if the steel bar behaviored elastically.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.117-123
• /
• 1999

The analytical instrument method was applied to analyze malodorous sulfur compounds emitted from industrial fields. Six factories and two sites which release malodorous substances into ambient air were selected to determine the level of hydrogen sulfide($H_2S$), methylmercaptan(MeSH), dimethyl sulfide($Me_2S$), and dimethyl disulfide($Me_2S_2$) using automated thermal desorption system (STD400) and GC-FPD in summer and fall seasons of 1999. The Air sampler for ATD400 uses a small pump to draw sample and a mass flow controller to adjust sample amount without using a dilution apparatus. The trap temperature of ATD400 reached to $-80^{\circ}$ by supplying liquid nitrogen and $H_2S$ can be analyzed under this condition. The recovery rates of $H_2S$, MeSH, $Me_2S$, and $Me_2S_2$ of odorous sulfur compounds standard were shown 98.2%, 93.6%, 98.2%, 99.4% respectively. The concentrations of $Me_2S$ at outside boundary of G market, L factory, and J factory were 0.018ppm, 0.021ppm, 0.032ppm in summer, respectively. The concentration of $H_2S$ at Nanjido landfill was 1.167ppm in summer, but that of $H_2S$ was not detected in fall because of soil covering. The concentration of H2S and $Me_2S_2$ at inside of Chonggye stream were 0.564ppm and 1.045ppm in summer, while those of H2S and Me2S2 were 0.285ppm and 0.465ppm in fall, respectively.

• Korean journal of applied entomology
• /
• v.31 no.2
• /
• pp.144-152
• /
• 1992

The juvenile hormone(JH) titers and juvenile hormone esterase (JHE) activities were mea¬sured in larval homogenates of the chestnut gall waL,J, Dryocosmus kuriphilus Yasumatsu, parasiting a susceptible and two resistant chestnut ( Cheuk-Pa, and Dan- Tak) varieties by GLC, Galleria wax test and Liquid scintilation counter. JH of the chestnut gall wasp was identified as JH- I. Their juvenile hormone titers were 35,800 GU/g(Cheuk-Pa), 30,900 GU/g (Dan-Tak), and 28,600 GU/g(susceptible variety). The juvenile hormone esterase activities were 1.48 n mole/min/ml(Cheuk-Pa), 1.63 n mole/min/ml(Dan- Tak), and 1.89 n mole/mini ml(susceptible variety). JH titer activity of the chestnut gall wasp parasiting resistant varie¬ties were higher than that from susceptible, whereas their JHE activity was higher in those from susceptible variety than those from resitant varieties. JH titer and JH specific esterase activity was inversely proportional.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.626-631
• /
• 2005

The effects of Pleurotus (P.) eryngii on the weight gains, food efficiency ratios, serum and hepatic lipid concentrations were investigated in male rats fed the high fat diets. Twenty one week-old Sprague-Dawley rats were given three different types of diet for 10 weeks, respectively: a control diet (high fat; $20\%$ lard), two kinds of P. eryngii diet supplemented with $3\%\;or\;5\%$ of dry P. eryngii powder in substitutes for the same amounts of cellulose in the control diets. The body weight gains and food efficiency ratios of the rats fed $3\%\;and\;5\%$ P. eryngii diets were significantly lower than those of the rats fed the control diet. The concentrations of hepatic total lipid and triglyceride in the rats fed the P. eryngii diets were significantly lower than those in the rats fed the control diet. But the hepatic cholesterol contents of the rats fed the P. eryngii diets were similar to those of the rats fed the control diet. The concentrations in serum total cholesterol, LDL-cholesterol, and atherogenic index ratios were significantly lower in the rats fed the P. eryngii diets compared to those fed the control diet. The HDL-cholesterol/total- cholesterol ratio was significantly higher in the rats fed the P. eryngii diets compared to those fed the control diet. There were no significant difference found in the serum triglyceride, phospholipid and HDL-cholesterol concentrations among the experimental groups. These results showed that feeding of P. eryngii powder feeding decreased the total cholesterol, LDL-cholesterol and atherogenic index and increased the HDL-cholesterol/total-cholesterol ratio in serum of the rats fed high fat diet.