• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.83-88
• /
• 2008

The QPP interleaver has been gaining attention since it provides contention-free interleaving functionality for high speed parallel turbo decoders. In this paper we first show that the quadratic term $f_2x^2%K$ of $f(x)=(f_1x+f_2x^2)%K$, the address generating function, is periodic. We then introduce a low-power address generator which utilizes this periodic characteristic. This generator follows the conventional method to generate the interleaving addresses and also to save the quadratic term values during the first half of the first period. The saved values are then reused for generating further interleaved addresses, resulting in reduced number of logical operations. Power consumption is reduced by 27.38% in the design with fixed-K and 5.54% in the design with unfixed-K on average for various values of K, when compared with the traditional designs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.454-463
• /
• 2000

A method is presented to alter the geometry of the conventional linearly shaped wire antenna for increasing its bandwidth. The synthesis is two-demensionally symmetric and is based on the minimization of frequency-dependence of the boresight far-field electric field intensity. The current distribution on the wire is calculated by Galerkin method using pulse functions. The shaping limitation for wide-band characteristics is still found because of standing waves due to reflected waves from antenna ends. The limitation overcome by a distribution of resistive loads near ends of wire. The antenna loaded resistively has flat characteristics satisfying a power gain of $6.5\pm1.1$dBi and VSWR of at most 2 over 10:1 bandwidth. The results are verified by comparing with similar results for the conventional linear V-dipole.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.229-237
• /
• 1992

Series system reliability analysis of non-reactive contaminant transport is performed in a two dimensional horizontal domain with two different limit state functions: (1) concentration threshold and (2) exposure time threshold. The transient source transport model is combined with the system reliability model to evaluate the probability that a specified maximum concentration at a node of interest would be exceeded or that a moderate concentration would exceed some exposure limit over a given period of time. The results give probabilities of exceedence greater than probability of each component and they tend to be dominanted by the component with larger probability. Transverse dispersivity turns out to be an important parameter in addition to hydraulic conductivity in a two-dimensional contaminant transport model with transient source. System sensitivity is found to reflect the corresponding sensitivity of both components, with the component with larger probability having a greater influence.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.48-57
• /
• 2020

Recently, with the rapid development of image recognition technology, the demand for object analysis in road CCTV videos is increasing. In this paper, we propose a method that can adaptively find the counting line for traffic analysis in road CCTV videos. First, vehicles on the road are detected, and the corresponding positions of the detected vehicles are modeled as the two-dimensional pointwise Gaussian map. The paths of vehicles are estimated by accumulating pointwise Gaussian maps on successive video frames. Then, we apply clustering and linear regression to the accumulated Gaussian map to find the principal direction of the road, which is highly relevant to the counting line. Experimental results show that the proposed method for detecting the counting line is effective in various situations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.383-383
• /
• 2012

전자소자 및 광전소자의 최적화 조건을 확립하기 위해 반도체 나노양자구조의 물리적 현상에 대한 연구가 활발히 진행되고 있다. 반도체 양자세선은 일차원 구조의 기초 물리 특성 관찰과 소자로서의 응용 가치가 높다. 양자세선을 사용한 단전자 트랜지스터, 공명터널 다이오드, 발광다이오드, 광탐지기 및 레이저 소자 제작과 관련한 연구가 활발히 진행 중에 있다. 나노양자구조들 중에서 양자우물과 양자점에 대한 실험적 및 이론적 연구가 많이 진행되었으나, 복잡한 공정 과정과 물리적 이론의 복잡함으로 양자세선에 대한 연구는 상대적으로 미흡하다. 양자세선을 이용한 전자소자와 광전소자의 효율을 증진하기 위해서는 양자세선의 전자적 성질에 대한 연구가 중요하다. 본 연구에서는 InAs/InP 양자세선에 대한 기저상태와 여기상태의 전하분포, 부띠천이 및 전자적 성질을 고찰하였다. 가변 메시 유한 차분법을 이용하여 양자세선의 이산적 모델을 확립하여 변형효과가 양자세선 구조에서 부띠에 영향을 주는지 조사하였다. 변형효과와 비포물선효과를 고려한 슈뢰딩거 방정식을 사용하여 변형 포텐셜을 계산하였으며 양자세선의 포텐셜 변화를 관찰하였다. 양자세선의 포텐셜 변화에 따라 전하구속분포, 에너지 준위 및 파동 함수를 계산하였다. 기저상태의 부띠 간에 발생하는 천이와 여기상태의 부띠 간에 발생하는 부띠 간의 엑시톤 천이 에너지 값을 계산하였다. 계산한 부띠 에너지 천이 값이 광루미네센스로 측정한 엑시톤 천이와 잘 일치하였다. 이 결과는 양자세센의 이차원적인 전자적 구조를 이해하고 양자세선을 사용하여 제작된 전자소자 및 광전소자의 전자적 성질을 연구하는데 도움을 주며, 저전력 나노양자소자를 제작하는 기초지식을 제공하는 중요한 역할을 할 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.1
• /
• pp.17-27
• /
• 2012

Since geologic data are often sampled at sparse locations, it is important not only to predict attribute values at unsampled locations but also to assess the uncertainty attached to the prediction. In this study the assessment of the local uncertainty of prediction for the thickness of the consolidation layer was performed by using the indicator approach. A conditional cumulative distribution function (ccdf) was first modeled, and then E-type estimates and the conditional variance were computed for the spatial distribution of the thickness of the consolidation layer. These results could be used to estimate the spatial distribution of secondary compression and to assess the local uncertainty of secondary compression for Songdo New City.

• School Mathematics
• /
• v.11 no.2
• /
• pp.243-260
• /
• 2009

In this paper, we have designed a teaching unit for the learning mathematising of secondary pre-service teachers by exploring generalized fibonacci sequences. First, we have found useful formulas for general terms of generalized fibonacci sequences which are expressed as combinatoric notations. Second, by using these formulas and CAS graphing calculator, we can help secondary pre-service teachers to conjecture and discuss the limit of the sequence given by the rations of two adjacent terms of an m-step fibonacci sequence. These processes can remind secondary pre-service teachers of a series of some mathematical principles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.29-37
• /
• 2016

This paper proposes a shape optimization of the metal boss for a composite motor case using finite element analysis. For the structural safety and the weight reduction of the composite motor case, under the internal pressure, the fiber stress in the dome area and the tightening bolt stress are constrained and the boss weight is set to objective function, respectively. The response surface models are constructed for the performance characteristics by using response surface method. The significance of the design variables about the performance characteristics is evaluated through the ANOVA(analysis of variance) and the goodness of fit test for the constructed model is performed through the regression analysis. The SQP(sequential quadratic programming) algorithm is used for the optimization and the proposed method is verified by performing structural analysis for the optimum shape.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.391-399
• /
• 2008

In this paper, we further generalize the work of Lin and Abel to the case of the first and the second order derivatives of energy release rates for two-dimensional, multiply cracked systems. The direct integral expressions are presented for the energy release rates and their first and second order derivatives. The salient feature of this numerical method is that the energy release rates and their first and second order derivatives can be computed in a single analysis. It is demonstrated through a set of examples that the proposed method gives expectedly decreasing, but acceptably accurate results for the energy release rates and their first and second order derivatives. The computed errors were approximately 0.5% for the energy release rates, $3\sim5%$ for their first order derivatives and $10\sim20%$ for their second order derivatives for the mesh densities used in the examples. Potential applications of the present method include a universal size effect model and a probabilistic fracture analysis of cracked structures.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.469-478
• /
• 1994

In this paper, a high speed, high resolution information processing digital- analog converter was designed for high definition color graphic, digital image signal processing, HDTV. For high speed operation, matrix type current cell array, latch which is not use pipelined, and two dimensional structure decoder using transmission gate were designed. It is adopted to fast-conversion, low-power implementation and exhibited high performance at linearity and accuracy. To reduce silicon area and to maintain resolution, current cell array composed of weighted and non-weighted current cells. In this paper, deglitching current cell design for high accuracy, new switching algorithm assert to reduce switching error. It's This circuit dissipates 130W with a 5-V power supply, and operate above 100MHz with 10 bit resolution.