• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.137-148
• /
• 2010

The Myoungbong mine located in Boseong-gun, Jellanamdo consists of Au-Ag bearing quartz veins which filled the fissures of Bulguksa granitic rocks of Cretaceous. The tailings obtained from the Myungbong mine were used to investigate the effects of various processes, such as oxidation of primary sulfides and formation(alteration) of secondary and/or tertiary minerals, on arsenic immobilization in tailings. This study was conducted via both mineralogical and chemical methods. Mineralogical methods used included gravity and magnetic separation, ultrasonic cleaning, and instrumental analyses(X-ray diffractometry, energy-dispersive spectroscopy, and electron probe microanalyzer) and aqua regia extraction technique for soils was applied to determine the elemental concentrations in the tailings. Iron (oxy)hydroxides formed as a result of oxidation of tailings were identified as three specific forms. The first form filled in rims and fissures of primary pyrites. The second one precipitated and coated the surfaces of gangue minerals and the final form was altered into yukonites. Initially, large amounts of acid-generating minerals, such as pyrite and arsenopyrite, might make the rapid progress of oxidation reactions, and lots of secondary minerals including iron (oxy)hydroxides and scorodite were formed. The rate of pH decrease in tailings diminished, in addition, as the exposure time of tailings to oxidation environments was prolonged and the acid-generating minerals were depleted. Rather, it is speculated that the pH of tailings increased, as the contribution of pH neutralization reactions by calcite contained in surrounding parental rocks became larger. The stability of secondary minerals, such as scorodite, were deteriorated due to the increase in pH, and finally arsenic might be leached out. Subsequently, calcimn and arsenic ions dissociated from calcites and scorodites were locally concentrated, and yukonite could be grown tertiarily. It is confirmed that this tertiary yukonite which is one of arsenate minerals and contains arsenic in high level plays a crucial role in immobilizing arsenic in tailings. In addition to immobilization of arsenic in yukonites, the results indicate that a huge amount of iron (oxy)hydroxides formed by weathering of pyrite which is one of typical primary minerals in tailings can strongly control arsenic behavior as well. Consequently, this study elucidates that through a sequence of various processes, arsenic which was leached out as a result of weathering of primary minerals, such as arsenopyrite, and/or redissolved from secondary minerals, such as scorodite, might be immobilized by various sorption reactions including adsorption, coprecipiation, and absorption.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.63-63
• /
• 2012

편광분석법(ellipsometry)은 대상 물질의 유전율 함수의 실수부와 허수부를 Kramers-Kronig 관계식의 도움 없이 그 물질상수를 정확히 측정할 수 있는 매우 우수한 기술이다. 이 기술의 큰 장점 중 하나는 빛의 편광상태의 변화를 이용한 비파괴적인 방법으로써 실시간 측정이 가능하며, 박막의 두께측정의 오차범위는 0.1 nm 이하로써 매우 정확하다는 것이다. 본 연구자는 이러한 우수한 측정 기술인 편광분석법을 고진공의 분자살박막증착장치(MBE) 와 결합하여 AlSb, AlP의 유전율 함수를 측정하였다. Al 계열을 포함하는 반도체 화합물은 Al의 산소친화력이 강해 대기 중에서 순수한 유전율 함수를 얻기가 불가능하다. 하지만 본 연구실에서 초고진공 상태의 MBE 챔버에서 시료를 성장시키는 동시에 실시간으로 편광분석기를 이용하여 측정하였고, 지금까지 발표된 결과들 중 가장 순수한 상태의 AlSb 유전율 함수를 얻어낼 수 있었다. 또한 순수한 AlP의 유전함수를 측정할 수 있었고, 이는 편광분석기를 이용한 최초의 실험결과로써 이차미분을 이용한 전이점 분석결과 이론적인 전자밴드구조에서 E1, E1+${\Delta}1$, E2에 해당하는 밴드갭들을 확인할 수 있었다. 또한 표면의 원자배열 구조와 실시간으로 일어나는 그들의 역학적인 현상들에 관한 정보를 얻을 수 있는 surface photoabsorption (SPA)를 metalorganic chemical vapor deposition (MOCVD)에 장착하여 실시간 모니터링이 가능하도록 하였다. SPA를 이용하여 GaAs/AlGaAs 양자우물구조의 성장을 원자층 수준으로 실시간 모니터링을 할 수 있었다. 그리고 SPA를 이용하여 MOCVD 안에서 InP에 As가 흡착 및 탈착되는 현상을 분석하여, As의 흡착이 두 단계에 의해 이루어짐을 분석하였다. 그리고 편광분석법의 빠르고 정확한 측정 기술을 규칙적인 구조체에서 전자기파의 회절을 구할 수 있는 Rigorous Coupled-Wave Analysis (RCWA) 계산방법과 결합하여 나노구조의 기하학적인 모양을 정확하고 빠르게 구할 수 있었다. 본 연구를 위해 규칙적인 3차원 Si 구조체 제작하여 편광분석기로 측정하고 $SiO_2$와 표면 거칠기를 고려하여 RCWA로 분석한 결과, 규칙적인 Si 구조와 산화막 층까지 정확하게 분석할 수 있음을 확인하였다. 또한 규칙적인 나노구조분석 연구를 넘어 불규칙적인 나노구조에 대한 분석 가능성을 보이기 위해 InAs 양자점을 증착하여 분석하였고, 이를 통해 편광분석법과 RCWA를 이용하여 불규칙적인 나노구조의 모양과 크기, 분포의 분석이 가능함을 보였다.

• Journal of Korean Society of Forest Science
• /
• v.45 no.1
• /
• pp.62-67
• /
• 1979

Ultraviolet microscopy of ultrathin sections of wood has proved to be one of the useful means for determining the lignin distribution in the various regions of the cell wall. Also, spectral approach and quantitative analysis of isolated compound middle lamella fraction from birch xylem have revealed that the lignin associated with the vessel secondary wall and middle lamella is composed predominantly of gualacylpropane units. Lignin deposited in the fiber and ray parenchyma secondary walls is composed mostly of syringylpropane units. The middle lamella lignin around fibers and ray cells contains both guaiacyl and syringyl propane quits. On the basis of the results above, this research was carried out to clarify the origin of milled wood lignin (MWL) by analysing the chemical characteristics of ML MWLs extracted at various milling stages. The amount of phenolic hydroxyl-, ${\alpha}$-carbonyl-, and methoxyl-group in the MWL's increases the milling time. And progressive mining contributes to the merease of ratio of syringylaldehyde to vanillin(S/V ratio) after nitrobenzene oxidation of MWL. Accordingly, It could be concluded that milled wood lignin extracted at the initial milling stage derives from compound middle lamella region of cell wall, whereas, with progressive milling, lignin of secondary wall of fiber is introduced gradually to milled wood lignin. These results are suggesting that heterogeneous chemical structure of lignins in hardwood exists. Although milled wood lignin at the initial stage seems to have lower molecular weight in comparison with milled wood lignin extracted at final milling stage from the result of Gel-filtration curves, further study would be required on molecular weight distribution of milled wood lignin in future.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.91-94
• /
• 2008

Newly developed Atom Probe Tomography (APT) technique can provide the highest available spatial resolution, 3D tomography imaging and quantitative chemical analysis in a sub-nm scale. As a complementary technique to APT, Nano-secondary ion Mass Spectroscopy (SIMS) also provides the boron distribution in micro-scale. Therefore, the exact behavior of boron at either grain boundary or grain interior in steels can be investigated by the combination of APT and SIMS techniques from the sub-nanometer scale to the micrometer scale. The results obtained by both APT and SIMS revealed that the boron atoms were mainly segregated to the grain boundaries rather than to the grain interior in the steels containing 50ppm and 100ppm boron. It also found that carbon atoms were segregated at the boron enriched regions, which were thought to be retained austenite phase due to the chemical composition of carbon atoms.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.11a
• /
• pp.167-170
• /
• 2005

충주댐 상${\cdot}$하류 하천 주요 지점의 수위-유량 상관관계를 분석하기 위하여 2004년 3월부터 12월까지 266일간 4개 수위국 지점을 대상으로 현지조사 및 하천측량을 실시하고, 홍수기 및 평${\cdot}$갈수기에 유량측정을 실시하여 수위-유량 관계식을 유도하였으며, 이를 바탕으로 유출량산정과 유황분석을 실시하였다. 평${\cdot}$갈수기 신뢰성 있는 수위-유량 관계곡선을 유도하기 위하여 실시간으로 관측되는 수위를 확인(www.wamis.go.kr)하여 측정지점의 수위를 균형있게 분포되도록 하여 신뢰도 향상을 기할 수 있었다. 2004년 홍수기, 평갈수기에 측정한 수위-유량성과를 이용하여 수위-유량관계식을 홍수기, 평갈수기로 나누어 유도하였으며, 표준편차와 상관계수를 검토한 결과 대체로 이차식 형과 지수식 형에 의한 계산치가 실측치에 근접하는 것으로 나타났다. 본 연구에서 작성한 수위-유랑관계식의 신뢰성 검증을 하기 위하여 2004년 7월 11일에서 7월 20일까지의 홍수시의 시간별 유출량자료와 2003년 11월 1일에서 2004년 10월 31일까지의 일별 유출량자료를 분석한 결과, 각 수위표지점의 첨두유량과 유출율 관계를 댐유입량 자료과 비교 검토하여 또한 HEC-RAS를 이용하여 수면형을 계산하여 수위-유량 관계식의 신뢰도가 높은 것을 확인할 수 있었다.

• Journal of the Korean School Mathematics Society
• /
• v.15 no.2
• /
• pp.299-316
• /
• 2012

In this paper, we examine high school in order to know their ability for understanding about fundamental functions, such as polynomial, trigonometric, logarithm and exponential functions which have learned from high school. The result of this study shows as follows. More than half students are not able to draw shape of given functions, except polynomial. More students do not fully understand about function properties such as domain, codomain, range, maximum and minimum value.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1831-1836
• /
• 2014

Probabilistic liquefaction hazard map is now widely needed for engineering practice. Based on the Liquefaction Potential Index (LPI) calculated from liquefied and non-liquefied cases, we attempted to estimate probabilities of liquefaction induced ground failures using logistic regression. We then applied this approach for the regional area. LPIs were calculated based on 273 Standard Penetration Tests in the floodplains in the St. Louis area, USA and then interpolated using cokriging with the covariable of peak ground acceleration. Our result shows that some areas of $LPI{\geq}5$, due to soft soil layers and shallow groundwater table, appear probabilities of ground $failure{\geq}0.5$.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.547-554
• /
• 2014

This paper discusses a method of estimating variance components for random effects model. Henderson's method I and III are discussed for the esimation of variance components. This paper shows how to use projections instead of using Henderson's methods for the calculation of sums of squares which are quadratic forms in the observations. It also discusses that eigenvalues can be used for getting the expectations of sums of squares in place of using the method of Hartley's synthesis. It shows the suggested method is much more effective than those methods.

• The Korean Journal of Applied Statistics
• /
• v.28 no.1
• /
• pp.115-122
• /
• 2015

This article is concerned with count time series taking values in non-negative integers. Along with the first order mean of the count time series, conditional variance (volatility) has recently been paid attention to and therefore various integer-valued GARCH(generalized autoregressive conditional heteroscedasticity) models have been suggested in the last decade. We introduce diverse integer-valued GARCH(INGARCH, for short) processes to count time series and a real data application is illustrated as a case study. In addition, zero inflated INGARCH models are discussed to accommodate zero-inflated count time series.