• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.140-140
• /
• 2004

• The Korean Journal of Applied Statistics
• /
• v.17 no.3
• /
• pp.499-505
• /
• 2004

The Pareto diagram analysis of the experimental data by the two level orthogonal arrays has been used widely in practice since it is a graphical, quick and easy method to analyze experimental results, which does not use the analysis of variance to screen significant effects. For the analysis of the experimental data by $L_{18}(2 \times 3^7)$ orthogonal array, Park(1996) proposed Pareto ANOVA in which the size of effects is defined by the mean squares of effects and the Pareto principle is used. In this paper, a new approach of the Pareto diagram analysis of the experimental data by $L_{18}(2 \times 3^7)$ orthogonal array is proposed. The main idea is to partition the size of three level effects by that of linear and quadratic orthogonal contrasts of those effects.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.43-51
• /
• 2017

The purpose of this study is to find influencing factors of the pay satisfaction of the social workers in the private sector and to suggest improvement plan. Therefore, we analyzed the overall condition of social workers' pay level and the factors affecting pay satisfaction. The main results are as follows. First, social workers had many female, advanced, disciplined, regular workers and were dissatisfied with the pay. Second, female, lower age, lower education level, higher level of pay, non - regular workers had higher pay satisfaction. Third, the main factors influencing pay satisfaction were the level of pay and welfare factors. Finally, we suggested practical and policy implications that reflect the factors of pay satisfaction of social workers.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.28-38
• /
• 2018

Although the adhesion properties of composite electrodes are important for securing long-term reliability and realizing high energy density of lithium secondary batteries, related research has not been carried out extensively due to the limitation of measurement technology. However, surface and interfacial cutting analysis system(SAICAS), which can measure the adhesion properties while cutting and peeling a coating layer of $1{\sim}1000{\mu}m$ thickness, has been developed and applied for analyzing the adhesion properties of composite electrodes for lithium secondary batteries. Thus, this review presents not only the principle and measurement method of SAICAS but also comparison results between SAICAS and conventional peel test. In addition, application examples of SAICAS are introduced in the study of electrode design optimization, new binder derivation study, and binder distribution in composite electrode. This suggests that SAICAS is an analytical method that can be easily applied to investigate the adhesion properties of composite electrodes for lithium secondary batteries.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.458-462
• /
• 2007

Spectroscopic ellipsometry is an excellent technique for determining dielectric function. To obtain critical point energy, standard analytic critical point expression is used conventionally for second derivatives of dielectric function which might increase high frequency noise than signal. However, reciprocal-space analysis offers several advantages for determining critical point parameters in optical and other spectra, for example the separation of baseline, information, and high frequency noise in low-, medium-, high-index Fourier coefficient, respectively. We used reciprocal Fourier analysis for removing noise and determining critical point of ZnCdSe alloy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.146-150
• /
• 2011

본 연구에서는 길이 35.6m, 폭 4m, 사행도 1.8의 2회 사행하는 복단면 사행하도의 상류 직선부와 만곡 정점부 6개 지점에 폭 0.4m, 길이 0.8m의 타원기둥 형태의 부유 구조물을 구성하여, 0.25m, 0.40m의 수심 조건으로 수치모의를 수행하였다. 수치모의 결과자료 중에서 부유 구조물 주변의 흐름특성을 국부적으로 분석해 본 결과 부유 구조물이 없을 때의 흐름과는 상당히 다른 흐름특성들이 발견되었는데, 특히 그 중에서도 부유 구조물 아래에서 작용하는 상승류와 부유 구조물로 인한 단면 이차류의 분리가 두드러졌다. 이와 함께 수로 유입부와 유출부 사이의 총 수두 값 변화도 수로 내 부유 구조물의 유무에 따라 다르게 나타났다. 그리고 이러한 결과들 모두 동일 측선 상에서라도 부유 구조물의 위치가 바뀌면 다른 양상으로 나타났다. 본 연구에서는 하도 내에 부유 구조물이 있을 때 부유 구조물의 위치에 따른 통수능 및 흐름특성의 변화를 3차원 수치모의 결과를 통하여 보여준다. 그리고 그 결과들은 하도 내 부유 구조물을 설치 할 때, 검토대상에 부유 구조물 뿐 아니라 하도형태 및 하천의 흐름특성도 함께 포함되어야 함을 뒷받침해준다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.319.2-319.2
• /
• 2014

휴대기기 발전과 사용 증가로 인해 배터리의 고용량화와 소형화가 요구되고 있으며, 특히 의료용 센서 기기 같은 health care device에서 소형화에 대한 관심이 증가하였다. 박막 이차 전지는 박막형태로 배터리의 구성요소를 한층씩 쌓아 올린 형태이므로 소형화가 가능하며, 내부에 액체전해질이 없어 누액으로 인한 폭발등의 염려가 없다. 또한 Si 반도체 소자에 integration 할 수 있어 다양한 분야에 적용할 수 있다. 하지만 Si 소자에 integration시 리튬이 기판으로 확산되어 배터리 용량이 감소하거나 Si 소자에 악영향을 미칠 수 있다. 따라서 본 연구에서는 리튬의 확산 여부를 민감하게 평가할 수 있는 방법 및 리튬 확산을 억제할 수 있는 확산방지막에 대한 연구를 진행하였다. 리튬의 확산을 평가하는 방법으로는 물리적 분석 방법 및 전기적 분석 방법을 평가하여 가장 민감한 방법을 선정하였다. 또한 확산방지막으로는 반도체 배선공정에서 Cu 확산 방지막으로 사용되고 있는 Ta, TaN 등과 함께 Na 확산 방지막으로 알려진 $Al_2O_3$ [1]등을 평가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.482-482
• /
• 2012

대기압 플라즈마 소스는 미생물을 살균하는 효과를 가지고 있으나 그 메커니즘에 대해서는 여전히 많은 연구가 필요한 실정이다. 우리는 본 연구에서 메커니즘 규명을 위한 시작단계로 플라즈마에 대한 미생물의 반응을 생물학적 및 물리적 분석을 통해 보고자 하였다. 연구에 사용한 미생물은 yeast인 Saccharomyces cerevisiae 이며 Ar Gas 플라즈마를 사용하였다. Yeast에 일정한 시간 동안 플라즈마를 조사한 후 세포의 생존, 모양 변화 관찰 및 DNA에 대한 영향이 분석되었고 r-FIB 장비를 이용하여 세포표면의 이차전자 방출계수를 측정하였다. 플라즈마 조사 시간에 따라 Yeast active cell의 수가 감소하며, water에 넣고 조사할때에는 YPD media에 넣고 조사한 것에 비해 급격히 감소함을 볼 수 있다. 셀의 모양 관찰 결과도 water에 넣고 조사할 때, YPD media보다 더 찌그러듬을 볼 수 있다. 플라즈마 조사량에 따라서 Water의 PH 값은 YPD에 비해 급격히 낮아짐을 보인다. pH의 값을 달리하고 SNP와 H2O2가 첨가된 water에 Yeast를 배양시킬 때, pH의 값이 낮아질수록 yeast의 생존도 감소함을 볼 수 있다. 그리고 DNA gel electrophoresis를 통해 플라즈마 처리를 하게되면 Yeast의 DNA 양이 감소하는 것을 관찰할 수 있다. 또한 플라즈마 처리를 3분 하였을 때의 Yeast 세포막으로부터 방출되는 이차전자방출계수는 다른 처리시간에 대한 값에 비하여 확연히 증가하는 것을 볼 수 있다. 이들 사실로부터 플라즈마의 효과로 인해 외부의 전자를 흡수 및 차단할 수 있는 기능을 갖고 있는 Yeast 세포막의 구조가 변형되어 손상되었음을 의미한다.

• Journal of Chest Surgery
• /
• v.41 no.5
• /
• pp.619-624
• /
• 2008

Background: Secondary spontaneous pneumothorax is caused by various underlying lung diseases, and this is despite that primary spontaneous pneumotherax is caused by rupture of subpleural blebs. The treatment algorithm for secondary pneumothorax is different from that for primary pneumothorax. We studied the recurrence rate, the characteristics of recurrence and the treatment outcomes of the patients with secondary spontaneous pneumothorax. Material and Method: Between March 2005 to March 2007, 85 patients were treated for their first episodes of secondary spontaneous pneumothorax. We analyzed the characteristics and factors for recurrence of secondary spontaneous pneumothorax by conducting a retrospective review of the medical records. Result: The most common underlying lung disease was pulmonary tuberculosis (49.4%), and the second was chronic obstructive lung disease (27.6%), The recurrence rate was 47.1% (40/85). The second and third recurrence rates were 10.9% and 3.5%, respectively. The mean follow up period was $21.1{\pm}6.7$ months (range: $0{\sim}36$ month). For the recurrence cases, 70.5% of them occurred within a year after the first episode. The success rates according to the treatment modalities were thoracostomy 47.6%, chemical pleurodesis 74.4%, blob resection 71% and Heimlich valve application 50%. Chemical pleurodesis through the chest tube was the most effective method of treatment. The factor that was most predictive of recurrence was 'an air-leak of 7 days or more' at the first episode. (p=0.002) Conclusion: The patients who have a prolonged air-leak at the first episode of pneumothorax tend to have a higher incidence of recurrence. Further studies with more patients are necessary to determine the standard treatment protocol for secondary spontaneous pneumothorax.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.2
• /
• pp.85-90
• /
• 1999

Purpose : The purpose of this study is to evaluate the clinical and histological results of the osteoarthritic patients who had second look arthroscopy after microfracture surgery. Materials and Methods : From Oct. 1997 to Dec. 1998, 46 patients, 48 knees were treated by microfracture technique. In the 22 patients, 24 knees, 'second-look' arthroscopies and biopsies were performed at 6 months following microfracture. Three patients were men and 19 patients were women. Average age of the patients were 58 years (range, 40-75 years). The average follow up period was 12 months(7-20 months). We analysed clinical results according to the nine-point scale. Also we observed type II collagen formation with immunohistochemical staining. Results : Clinical results were excellent in 83% and good in 17%. Among the 24 knees, more than 80% areas of chondral defect were covered with regenerated cartilage in 21 knees. Histologically, the regenerated tissue appears to be a hybrid of hyaline cartilage and fibrocartilage. Regenerated cartilage contains variable amount of type II collagen with immunohistochemical staining. Conclusion : Most of the patients had significant improvement clinically. 'Second-look' showed that the chondral defect areas were covered with newly grown grayish white tissue. Microfracture in the full thickness chondral defect provides and enriched environment for cartilaginous tissue regeneration.