• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.131-142
• /
• 2015

It is difficult to make an accurate estimate of the economic value and effects on societal economy of Nano-technologies. This research measures an economic value of Nano-technologies quantitatively and analyzes its influences on societal economy. This paper chooses some major industries as analysis targets and adapts the DEFRA comparative methodology model which has been developed in the UK and recommended by OECD. For this reason, some industries which are in range of economic value assessment were investigated and related data were collected. Also, the economic value and societal influences of Nano-technologies were calculated, through the procedure of the model. In addition, this study conducts a questionnaire to experts for the validity of measurement results and procedures. This paper suggests a guideline for economic value and effects on societal economy of Nano-technologies assessments through quantitative Defra comparative methodologies.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.51-61
• /
• 1999

$SrBi_2Ta_2O_9$ thin films were prepared on $Pt/SiO_2$/Si p-tyPp (100) substrate by r.f. magnetron sputtering method. The films were annealed at $800^{\circ}C$ and characterized in terms of micro-structures and electrical properties depending on film deposition conditions. XRD patterns of SBT films annealed at $800^{\circ}C$ indicated the typical SBT phase of (006), (111), and (200) with BiPt additional peaks. SEM images show that crystal gram become to grow with increasing the substrate temperature and decreasing the gas pressure. The remanant polarization(2Pr) and the coercive field(Ec) of 200nm thickness SBT film which was deposited at 10$0^{\circ}C$ under 50mtorr gas pressure and annealed at $800^{\circ}C$ were 20.07$\mu$C/$\textrm {cm}^2$ and 79kV/cm, respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.89-96
• /
• 2013

Considering the complexity and difficulty on the researching, how to enhance the performance of ejector-diffuser system effectively became a significant task. In the present study, the supersonic nozzle was redesigned using Chevrons installed at the inlet of the secondary stream of the ejector-diffuser system for the purpose of the performance improvement. A CFD method based on Fluent has been applied to simulate the supersonic flows and shock waves inside the ejector. Primary numerical analysis results show that the Chevrons get a positive effect on the ejector flows. The comparison of ejector performance with and without the Chevron was obtained and optimal number of chevron lobe is discussed to increase the performance. The ejector-diffuser system performance is discussed in terms of the entrainment ratio, pressure recovery as well as total pressure loss.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.640-644
• /
• 2010

하천, 호소 등에서 공사 시 준설작업으로 인해 고탁수가 발생되며 이러한 탁수의 이송 확산은 수환경에 변화를 초래한다. 탁수는 준설작업 시 커터헤드(cutter head)가 해저면에 닿는 순간부터 작동을 멈출 때까지 계속하여 발생하며, 이러한 과정들이 반복되면서 많은 양의 부유토사가 발생하게 되고 고탁수현상이 일어난다. 이렇게 발생한 탁수는 수체흐름에 따라 이송 및 확산된다. 탁수발생은 수중의 빛 투과를 감소시켜 일차 생산자인 부유성 및 부착조류의 생육을 저해하고, 이들의 생산성 감소와 군집구성의 변화는 수서생태계의 먹이사슬을 통해 이들을 먹이로 하는 저서무척추동물과 어류의 현존량 감소와 종 구성에 영향을 미치고, 고농도의 현탁 입자는 어류 아가미에 염증을 유발하거나 점막의 파괴와 감염을 유발하여 치사시킬 수도 있다. 또한 과도한 부유 입자는 하류로 침강되어 하천 바닥에 서식하는 부착조류, 무척추 동물 및 곤충의 생육에 피해를 주고, 이것은 어류의 먹이에 영향을 미쳐 어류 개체수를 감소시키거나 산란된 물고기 알을 매몰시키거나 질식시키는 등 여러 가지 방법으로 수서생물상에 영향을 미치게 된다.(낙동강수계관리위원회, 2005) 따라서 준설작업에 있어 탁수의 이송 확산범위를 사전에 예측하고 국내 실정과 환경여건에 알맞게 적용되고, 실용화될 수 있는 수치모델링에 대한 기반핵심 기술개발이 필요하다. 현재 낙동강에서 진행되고 있는 준설현장에서 발생하는 부유탁수의 이송 확산과정을 이차원 흐름해석모형인 RAM2 모형과 오염물 이송 확산해석모형인 RAM4 모형을 이용하여 수치해석을 하고 분석함으로써 수치해석에 의한 부유탁수의 이송 확산모의 결과가 환경영향 범위를 예측하는 데에 적용될 수 있는지를 알아보고자 한다.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.315-329
• /
• 2010

Characteristics of thermophilic bacteria and secondary materials on the pyrrhotite surface were investigated by using scanning electron microscopy (SEM). The thermophilic bacteria from an acid hot spring in Japan were incubated with pyrrhotite at $42^{\circ}C$, $52^{\circ}C$, and $62^{\circ}C$ respectively. SEM analysis of the reacted pyrrhotite showed that indigenous rod-shaped bacteria ranging from $0.4{\times}1.5{\mu}m$ to $0.3{\times}11.9{\mu}m$ in size were attached to the pyrrhotite surface at these temperatures with formation of secondary materials. Extracellular polymer substances were formed on the bacterial surface. We suggest that these polymers functioned as a capsule protecting bacteria from the extreme environment. Secondary materials such as elemental sulfur, Fe-hydroxide, S-Fe and O-P-Fe compounds were found on the pyrrhotite surface.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2006

Typical property of the white-rot fungi is their ability to degrade lignin and other aromatic compounds with non-specific extracellular enzyme. In this work, the modification of the strain(Funalia trogii ATCC 200800) and the culture condition was performed to enhance enzyme productivity. Single cell was separated by the protoplasts formation and several putative laccase and manganese peroxidase inducers were tested. By adopting the modified strain, enzyme productivity increased comparing with that of the original strain. Extracellular enzyme formation was highly stimulated by the addition of copper and various aromatic compounds in the glucose-based culture medium.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.93-98
• /
• 2001

CFT column has excellent structural properties due to the composite action between concrete and steel tube. The bond behavior between the constituent elements has to be found for analyzing the behavior of CFT column. A new model is necessary because most of existing models for bond stress-slip relationship of the deformed bar cannot be applied to the CFT column. Therefore, the objective of this research is to develop a new model related to the bond behavior of CFT column considering the relation between bond stress and vertical stress, and the distribution of lateral stress under the confinement created by steel casing. From equilibrium condition, the formula for relationship between bond stress and vertical stress is derived, and the relationship for the lateral stresses of the CFT column section is obtained by an Airy stress function. The experiments are performed for five CFT column specimens axially loading on concrete alone. The relation between bond strength and lateral stress is investigated from the regression analysis using the measured strains. Finally a new bond strength model is proposed, which is able to predict the relationship for the stress of each direction of CFT column loading on concrete.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.5
• /
• pp.179-188
• /
• 1995

SFRC overcomes brittleness of concrete and has increases strength due to the action of confmement, crack arrestmg mechan~sm and pull out resistances of steel f~bers ~ n s ~ d e the concrete. These lead also to the increased strength and ductility under the shear stress. It has been reported that the secondary remforcement effect of steel fibers IS more pronounced In shear than flexure. Addition of hooked stee!, fibers into the cementitious materials enhanced shear resistance and consequently improves structural behavior and shear strength of Reinforced Hooked-Steel-Fiber Concrete Ream(RHSFCI3) under the shear forces. Experimental observations were made on the main parameters effecting structural behavior of RHSFCB in this study. The volume fractions of fibers, shear span to depth ratios, and spaclngs of stlrrups were taken into account as the mam parameters. Some eyuatlons reported in the literatures, regardmg the predict~ons of the shear strength of RHSFCB have been evaluated stdtlst~cdlly based on the tot a1 number of 95 test results on RHSFCB faded In shear on shear flexu~al mode.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.137-142
• /
• 2015

$Mn_{1+X}Co_{2-X}O_4$ solid solutions with various Mn/Co ratios were synthesized by a combustion method, and used as cathode catalysts for lithium/air secondary battery. Their electrochemical and physicochemical properties were investigated. The morphology was examined by transmission electron microscopy (TEM), and the crystallinity was confirmed by X-ray diffraction (XRD) analyses. For the measurement of electrochemical properties, charge and discharge measurements were carried out at a constant current density of $0.2mA/cm^2$, monitoring the voltage change. Electrochemical impedance spectroscopy (EIS) analyses were also employed to examine the change in charge transfer resistance during charge-discharge process. $Mn_{1+X}Co_{2-X}O_4$ solid solutions showed enhanced cycleability as a cathode of Li/air secondary battery, and the performance was found to be strongly dependent on Mn/Co ratio. Among synthesized catalysts, $Mn_{1.5}Co_{1.5}O_4$ exhibited the best performance and cycleability, due to high charge transfer rate.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.177-183
• /
• 2013

As the development of available binder in the harsh conditions is needed, we propose the proper binder for high-voltage lithium-ion secondary batteries based on the quantum chemistry modeling. The optimized structures, HOMO (Highest Occupied Molecular Orbital) energies and ionization potentials of 4 binders, which were considered from monomer to tetramer, were investigated by the semi-empirical and DFT (Density Functional Theory) calculations. The results show that the ionization potential values by calculation tend to be close to the oxidation potentials from the measurement of linear sweep voltametry (LSV). The order of oxidative resistance from high value to low value is following: poly(hexafluropropylene), poly(vinylidene fluoride), poly(methyl acrylate) and poly(acryl amide). Also these results correspond with the experimental values. Thus, we find the reason why HOMO (Highest Occupied Molecular Orbital) energy of PHFP has the highest value than other binders by analysis of HOMO orbital structures.