• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1088-1091
• /
• 2017

최근 그래픽스 기반의 가상현실 기술의 발전과 관심이 증가하면서 3D 객체와의 자연스러운 상호작용을 위한 방법들 중 손 제스처 인식에 대한 연구가 활발히 진행되고 있다. 본 논문은 가상현실 3D 오브젝트와의 상호작용을 위한 MCSVM 기반의 손 제스처 인식을 제안한다. 먼저 다양한 손 제스처들을 립모션을 통해 입력 받아 전처리를 수행한 손 데이터를 전달한다. 그 후 이진 결정 트리로 1차 분류를 한 손 데이터를 리샘플링 한 뒤 체인코드를 생성하고 이에 대한 히스토그램으로 특징 데이터를 구성한다. 이를 기반으로 MCSVM 학습을 통해 2차 분류를 수행하여 제스처를 인식한다. 실험 결과 3D 오브젝트와 상호작용을 위한 16개의 명령 제스처에 대해 평균 99.2%의 인식률을 보였고 마우스 인터페이스와 비교한 정서적 평가 결과에서는 마우스 입력에 비하여 직관적이고 사용자 친화적인 상호작용이 가능하다는 점에서 게임, 학습 시뮬레이션, 설계, 의료분야 등 많은 가상현실 응용 분야에서의 입력 인터페이스로 활용 될 수 있고 가상현실에서 몰입도를 높이는데 도움이 됨을 알 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.93-105
• /
• 2001

In the lossless step of Lattice Vector Quantization(LVQ), the lattice codewords produced at quantization step are enumerated into radius sequence and index sequence. The radius sequence is run-length coded and then entropy coded, and the index sequence is represented by fixed length binary bits. As bit rate increases, the index bit linearly increases and deteriorates the coding performances. To reduce the index bits across the wide range of bit rates, we developed a novel lattice enumeration algorithm adopting the set partitioning method. The proposed enumeration method shifts down large index values to smaller ones and so reduces the index bits. When the proposed lossless coding scheme is applied to a wavelet based image coding, the proposed scheme achieves more than 10% at bit rates higher than 0.3 bits/pixel over the conventional lossless coding method, and yields more improvement as bit rate becomes higher.

• Journal of ILASS-Korea
• /
• v.9 no.4
• /
• pp.38-45
• /
• 2004

This study describes the analysis results of unsteady cavitating flows behavior inside nozzle of the prototype piezo-driven injector. This piezo-driven injector has been recognised as one of the next generation diesel injector due to a higher driven efficiency than the conventional solenoid-driven injector. The three dimensional geometry model along the central cross-section regarding of one injection hole has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and 'pseudo' steady state, even if under steady state boundary conditions. We could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.17-25
• /
• 2013

Performance of DI diesel engine with high fuel injection method is directly related to the emission characteristics and fuel consumption. At present, diesel injection system with piezo element is replacing conventional solenoid type due to their faster electro-mechanical properties. In this study, it was investigated the sensitivity characteristics regarding internal hydraulic modeling based on the AMESim environment of piezo-driven injector The analytic parameter for this study defined such as In/Out orifice, injection hole's diameter and driven voltage on piezo stack. As the results, it was shown that these parameter influence on a fast response characteristics of piezo-driven injector. Also we found fuel pressure recovery time is faster about 0.1 ms due to larger IN orifice diameter. And larger OUT orifice diameter occurs maximum pressure drop with faster its timing of about 0.2 ms.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.251-254
• /
• 2015

출석체크를 자동으로 하는 시스템으로 QR 코드나 NFC 등의 전자 태그기반 방식들이 있으나 태깅을 수동으로 해야 하는 불편함과 함께 태그의 물리적 파손 문제 등의 단점이 그 확산에 제한 사항으로 작용하고 있다. 본 논문에서는, 태그 기반 대신 Bluetooth Low Energy(BLE) 비콘 신호를 학생들의 스마트폰으로 수신하여 위치와 시간을 확인함으로 출석을 자동으로 체크하는 경제적이고 안정적인 출결 시스템을 제안한다. 나아가, 시스템 초기 및 유지 비용을 구성하는 요인들을 분석하고, 시스템의 안정적 운영을 보장하는 제한조건 하에서 BLE 비콘의 설치 및 운영의 경제성을 높이기 위한 추가적 변인들을 열거하고 변인들 간의 trade-off를 고려하여 시스템을 설계해야 함을 보였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.30-37
• /
• 2007

An exponentiation in $GF(2^m)$ is a basic operation for several algorithms used in cryptography, digital signal processing, error-correction code and so on. Existing hardware implementations for the exponentiation operation organize by Right-to-Left method since a merit of parallel circuit. Our paper proposes a polynomial exponentiation structure with a trinomial that is organized by Left-to-Right method and that utilizes a weakly dual basis. The basic idea of our method is to decrease time delay using precomputation tables because one of two inputs in the Left-to-Right method is fixed. Since $T_{sqr}$ (squarer time delay) + $T_{mul}$(multiplier time delay) of ow method is smaller than $T_{mul}$ of existing methods, our method reduces time delays of existing Left-to-Right and Right-to-Left methods by each 17%, 10% for $x^m+x+1$ (irreducible polynomial), by each 21%, 9% $x^m+x^k+1(1, by each 15%, 1% for $x^m+x^{m/2}+1$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.460-469
• /
• 2015

This study's aim is for reducing big data transfer time of IoT healthcare devices by modulating digital bits into Manchester code including zero-voltage idle as information for secondary compressed binary cluster's compartment after two step compression of compressing binary data into primary and secondary binary compressed clusters for each binary clusters having compression benefit of 1 bit or 2 bits. Also this study proposed that as department information of compressed binary clusters, inserting idle signal into Manchester code will have benefit of reducing transfer time in case of compressing binary cluster into secondary compressed binary cluster by 2 bits, because in spite of cost of 1 clock idle, another 1 bit benefit can play a role of reducing 1 clock transfer time. Idle signal is also never consecutive because the signal is for compartment information between two adjacent secondary compressed binary cluster. Voltage transition on basic rule of Manchester code is remaining while inserting idle signal, so DC balance can be guaranteed. This study's simulation result said that even compressed binary data by another compression algorithms could be transferred faster by as much as about 12.6 percents if using this method.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.829-836
• /
• 2016

This study was carried out on Kongju National University and its neighboring area, Mt. Gyeryong national park and Mt. Worak national park in the breeding season of long-tailed tits Aegithalos caudaatus from 2008 to 2012. The result of the inquiry, the nests were found in 15 species of trees, and this result shows me it's not choosy about them. But after having classified them according to the features and analyzed them, long-tailed tits preferred evergreen needleleaf tree and deciduous broad-leaf tree and deciduous bush, especially evergreen needleleaf tree. The concealment rate of long-tailed tits' nests was $11.61{\pm}4.79%]\;4.38{\pm}2.19%$(n=29) in Kongju National University and it's neighboring area, $6.06{\pm}2.31%$(n=43) in Mt. Gyeryong national park and $4.38{\pm}2.19%$(n=32) in Mt. Worak national park. By regional groups, the concealment rates of neighboring nests were almost same, but there are no differences among the areas. The average of the color codes was $26.52{\pm}16.14$(n=32) that those of the nest subtract from those of surroundings of the nest. The nests were procryptic according to their surroundings, and if their nest in a tree were evergreen needleleaf trees, they were made of moss. while if the trees of nest in a tree were yellow because of fungus, made of dried moss, they were yellow, too.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.393-404
• /
• 2007

A concept of multi-layered database is proposed for the integrated operation of bridge information in this study. The multi-layered database is a logically integrated database composed of standardized information layers. The standardized information layers represent the data sets that can be unified, and they are defined by standardized information models. Classification system of bridge component was used as a basis of the multi-layered database, and code system based on the classification system was employed as a key integrator to manipulate the distributed data located on the different information layers. In addition, data level indicating priorities of information layers was defined to support strategic planning of the multi-layered database construction. As a proof of concept, a prototype of multi-layered database for object-oriented 3-D shape information and structural calculation document was built. Data consistency check of the semantically same data in the two different information layer was demonstrated, It is expected that the proposed concept can assure the integrity and consistency of information in the bridge information management.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.79-85
• /
• 2009

In this paper, an accurate current reference using temperature and process compensation current mirror (TPC-CM) is proposed. The temperature independent reference current is generated by summing a proportional to absolute temperature (PTAT) current and a complementary to absolute temperature (CTAT) current. However, the temperature coefficient and magnitude of the reference current are influenced by the process variation. To calibrate the process variation, the proposed TPC-CM uses two binary weighted current mirrors which control the temperature coefficient and magnitude of the reference current. After the PTAT and CTAT current is measured, the switch codes of the TPC-CM is fixed in order that the magnitude of reference current is independent to temperature. And, the codes are stored in the non-volatile memory. In the simulation, the effect of the process variation is reduced to 0.52% from 19.7% after the calibration using a TPC-CM in chip-by-chip. A current reference chip is fabricated with a 3.3V 0.35um CMOS process. The measured calibrated reference current has 0.42% variation for $20^{\circ}$C${\sim}$100$^{\circ}$C.