• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.379-379
• /
• 2012

본 연구에서는 고품질의 ZnO 박막을 제작하기 위해 사파이어 기판 위에 ZnO 박막을 Pulsed Laser Deposition (PLD) 법으로 성장하였다. 레이저 에너지 밀도와 펄스주파수를 고정시켰으며, 성장온도와 산소 분압은 각각 $450{\sim}600^{\circ}C$ 및 5~20 sccm으로 변화를 주어 성장 온도와 산소 분압이 박막 특성에 미치는 영향을 분석하였다. 제작된 박막의 전기적 특성을 측정한 결과 성장온도의 증가에 따라 캐리어 농도는 $9.18{\times}10^{18}cm^{-3}$에서 $3.9{\times}10^{16}cm^{-3}$까지 감소하였고, 캐리어 이동도는 $0.95cm^2/Vs$에서 $8.47cm^2/Vs$ 까지 증가하는 경향을 나타내었으며, 산소분압의 변화에는 특정 임계조건을 갖는 것을 확인하였다. 이러한 이유는 PLD 법 성장 메커니즘에서 플라즈마 플럼(plasma flume) 내에 결합된 ZnO 분자가 기판으로 직접 성장이 이루어지는 과정에서 성장 온도가 증가함에 따라 플럼 내에서 결합 된 ZnO 분자의 열적 안정성이 향상되었으며, 유입되는 산소량의 감소로 인해 원자들의 표면 확산 거리 및 확산 시간이 길어져 보다 안정적인 박막 형성에 기인한 것으로 보인다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.99-99
• /
• 2011

마그네트론 스퍼터 법으로 Al2O3 기판 위에 ZnO 박막을 성장하여 열처리 온도에 따른 광학적 특성 변화를 Raman 분광법 및 photoluminescence (PL) 분광법으로 분석하였다. 박막 성장시 기판의 온도는 $500^{\circ}C$를 유지하였고, 성장된 시료에 대한 열처리는 $600^{\circ}{\sim}900^{\circ}C$의 구간에서 3분간 실행하였다. Raman 측정결과 열처리 전후 모든 시료에서 wurtzite nonpolar ZnO의 전형적인 특징인 A1-LO mode와 E2-low mode 및 E2-high mode가 관측되었다. 또한 열처리 온도 변화에 따른 Raman 피크의 이동은 보이지 않았다. 이로 미루어 본 연구에서 제작된 ZnO는 우수한 결정성을 갖고 있으며, 열처리에 의한 변형이 일어나지 않았음을 알 수 있었다. PL 측정 결과 열처리 전의 저온 발광 특성은 잘 분해되지 않는 밴드단 발광이 미약하게 나타났다. 그러나 열처리 온도가 증가함에 따라 exciton 피크가 잘 분리되면서 그 세기도 점차 증가하는 것을 알 수 있었다. Hall 측정 결과와 비교해 볼 때 열처리 온도가 증가 할수록 박막내 native defect가 열처리에 의해 감소되면서 전기적/광학적 특성이 향상되는 것으로 분석된다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.76-89
• /
• 2013

The exploration of the interaction effect among the components of attractiveness is impossible; therefore, this study uses an indirect estimates approach with multiple scale items that can measure the interaction effect among the components of attractiveness to solve the problem of direct estimates. Previous studies focused on intra-store type competition as their subjects; subsequently, this study dealt with intra-store type competition as well as inter-store type competition in the competing and selecting activities among fashion retailing stores with different business models (such as department stores, road brand stores, discount stores, outlets and internet shopping malls). This study suggests a generalized model for shopping attractiveness of stores and proposes a fashion retailing store type attractiveness (FaRSTA) model instead of a simple relative importance between store selection standards.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.83-93
• /
• 2007

This paper represents the development of 3-axises loadcell for measuring the side-force of suspension module of MPV(Multi Purposed Vehicle). The side force causes the failure of damper, such as leakage. The loadcell was developed using strain gauges, and the Wheastone bridge circuit to compensate for the cross-talk between the each axises and the measurement error by temperature. Structure analysis of loadcell was accomplished with FEM(Finite Element Method) to optimize the location of strain gages. The design optimization for important factors that have an effect on performance of loadcell was accomplished by using DOE(Design of Experiment). Loadcell was produced and successfully tested, showing good sensitivity and low cross-talk. The cross-talk of the developed loadcell is bellow 5%. The load history was measured at proving ground. The maximum side-force, the longitudinal force, and vertical force of MPV are 4.2 kN, 8.0 kN, and 17.0 kN, respectively, at Belgian road.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.57-62
• /
• 2005

Satellite contamination from back-scattered molecules has long been analyzed using the BGK theory or the DSMC technique which are rather inefficient in that they are complicated or take a long time in the analysis. This study presents a new technique of estimating the back-scattering contamination, which is very simple and easy to use like the view factor method and also very accurate. This method, called the modified view factor method, is equivalent to the DSMC in so far as the molecular thermal velocity is much smaller than the satellite velocity and the mean free path much longer than the satellite.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.44-53
• /
• 2006

In this study, the non-destructive computed tomography was adopted to observe the density profile of the needle-punched Carbon/Carbon(C/C) composites nozzle throat. The density profile of C/C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1244-1253
• /
• 1990

Time-Marching methods solving Euler equations are used for calculation of two-dimensional, steady, inviscid flow through a stationary compressor cascade. Calculation method is based on the Denton`s opposed difference scheme. A smoothing in the axial direction is used to increase the stability of solution. The computational grid consists of quadrilateral elements, one of which has four nodes at each corner and the grid points on the upper periodic boundaries are located one pitch away from those on the lower boundaries to satisfy the periodicity condition. Results of calculation show good agreement with other computational and experimental results, proving that the present method of calculation should be applied with confidence for the cascade flow with shock wave.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1018-1020
• /
• 2013

Conventionally, PCB fabrication processes detects simply electrical characteristics of TCP and COF by automatic manufacturing system and additionally, by introducing human visual detection, those are very ineffective in view of low cost implementation. So, this paper presents an efficient detection algorithm for short and protrusion-type defects based on reference images by using local binary pattern analysis. The proposed methods include several preprocessing techniques such as histogram equalizing, the compensation of spatial position and maximum distortion coordination Through several experiments, it is shown that the proposed method can improve the defect detection performance compared to the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.7
• /
• pp.575-597
• /
• 1991

As an elegant solution of the key management scheme for a conventional cryptosystem. Diffie and Hellman introduced a public key distrbution system, whose security depends on the intractabliity of discrete loganthm problem over a finite field, and since then a lot of vartants of DH KDSS have been proposed. In this paper, we present the systematic approach to analyzing the security of a generalized DH KDS and designing an efficient and secure scheme. We classify vanous attacking methods and point out a possible way to avoid these attacks through the examples of successful attacking methods and point out a possible way to avoid these attacks through the examples of successful attack against those systems proposed so far or designed for this purpose. As security analysis tools, we present the redueiblity test, the information theoretic approach, and the protocol analysis technique, which we apply to variations of DH scheme to examine their security under all possble attacks.

• Journal of Korea Game Society
• /
• v.21 no.4
• /
• pp.13-24
• /
• 2021

Recently, amendments to the e-Sports Act have been proposed in the Korea National Assembly. To evaluate the amendments, this study provided five factors of the e-sports industry: the high accessibility, the instability of the game, the difficulty of professional e-sports players, the fierce competition, and the lack of government policy. Based on these factors, this study suggested improvement in which the e-Sports Act should proceed for professional e-sports players, e-sports teams, and e-sports establishments.