• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.389-398
• /
• 2018

An MRA is considered to be an important policy tool within the WTO for overcoming technical barriers to trade. A number of studies on the economic impact of MRAs have demonstrated their positive economic effects. However, no studies have been conducted on MRAs in the pharmaceutical industry since analysis has been limited to industries as a whole or certain industries where some data were accumulated. Therefore, this paper analyzed the economic impact of MRAs for GMP inspection exemption in the pharmaceutical industry through the Conditional Valuation Method (CVM), a valuation technique for non-market goods. Pharmaceutical companies were asked whether or not they were willing to pay for the Korea-EFTA MRA through double-bounded dichotomous choice (DBDC) questions. The final WTP was estimated using the utility difference model developed by Hanemann (1984). As a result, annual economic effects on the pharmaceutical industry were estimated to be between KRW7.03 billion to KRW15.8 billion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2017

As Internet of Things (IoT) technology advances, there is a growing demand for location-based services (LBSs) to identify users' mobility and identity. The initial LBS system was mainly used to measure position information by measuring the phase of a signal transmitted from a global positioning system (GPS) satellite or by measuring distance to a satellite by tracking the code of a carrier signal. However, the use of GPS satellites is ineffective, because it is difficult to receive satellite signals indoors. Therefore, research on wireless communications systems like ultra-wide band (UWB), radio frequency identification (RFID), and ZigBee are being actively pursued for location recognition technology that can be utilized in an indoor environment. In this paper, we propose an LBS system that includes the 2.45GHz band for chirp spread spectrum (CSS), and the 3.1-10.6GHz band and the 250-750MHz bands for UWB using the IEEE 802.15.4a standard for low power-based location recognition. As a result, we confirmed that the 2.45GHz Industrial, Scientific and Medical (ISM) band RF transceiver and the ranging function can be realized in the hardware and has 0dBm output power.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.247-258
• /
• 2003

In this paper, we present a pen-shaped input device equipped with accelerometers and gyroscopes that measure inertial movements when a user writes on 2 or 3 dimensional space with the pen. The measurements from gyroscope are integrated once to find the attitude of the system and are used to compensate gravitational effect in the accelerations. Further, the compensated accelerations are integrated twice to yield the position of the system, whose basic concept stems from the field of inertial navigation. However, the accuracy of the position measurement significantly deteriorates with time due to the integrations involved in recovering the handwriting trajectory This problem is common in the inertial navigation system and is usually solved by the periodic or aperiodic calibration of the system with external reference sources or other information in the filed of inertial navigation. In the presented paper, the calibration of the position or velocity is performed on-line and off-line. In the on-line calibration stage, the complementary filter technique is used, where a Kalman filter plays an important role. In the off-line calibration stage, the constant component of the resultant navigational error of the system is removed using the velocity information and motion detection algorithm. The effectiveness and feasibility of the presented system is shown through the experimental results.

• Journal of the HCI Society of Korea
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2016

The landscape of the current fitness trackers is not only limited to the aerobic exercises but also the weight training is comparatively excluded. Recently, a few weight training fitness tracker was released, human-computer interaction was not well designed due to the lack of considering the context. Because body movement would be intense while doing exercises, having exercise performers hold or operate a device makes a negative experience. As the wearable device is always inseparable to body, it could provide effective feedback because holding or operating a device is not necessary. Therefore, this study aims to make the exercise performers feel a natural feedback through the wearable device to do effective exercises. As a result, this study identified three findings. First, the information which exercise performers most needed was 'during exercise.' and the most necessary information for exercise performers through wearable device's sensory feedback was about 'pace control' with counting and motivation. Second, the order of the most preferred presentation type of sensory feedback was auditory feedback, haptic feedback and visual feedback. Third, the satisfaction, utility, usefulness score of sensory feedback as same as the personal trainer's feedback. In conclusion, this study illustrated the feedback design implications using a wearable device while doing weight training and the possibilities that wearable device could be substitute for personal trainer.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.137-146
• /
• 2012

In SCM(Supply Chain Management), a management paradigm where the customer satisfaction is to be achieved by minimizing the cost, reducing the uncertainty, and obtaining the overall optimization. As it performs the integrated operation of the paths of information, assets, and knowledge from the raw material providers to the retailers, the adoption of RFID(Radio Frequency Identification) in SCM could be expected to magnify the effectiveness of the system. However, there is a huge risk by deciding whether or not RFID system is adopted without the objective analysis under the uncertain circumstances. This research paper presents the statistical analysis methodologies for the comparison of RFID with Barcode on the aspect of utility and the statistical analysis tool, RUSAT, which was programmed for nonstatisticians' convenience. Assuming a pharmaceutical industry, this paper illustrates how the data were entered and analyzed in RUSAT. The results of this research are expected to be used not only for the pharmaceutical related company but also for the manufacturer, the whole-saler, and the retailer in the other logistic industries.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1731-1736
• /
• 2007

본 연구에서는 체가름 시험을 통해 얻은 대표입경으로 조도계수를 산정하고 그 산정된 조도계수의 효용을 검정하고자 하였다. 체가름 분석을 통해 입도곡선을 작성하고 대표입경을 구함으로서 기 수립된 공식에 의한 조도계수를 산정하였다. 산정된 조도계수는 HEC-HMS의 하도추적 방법 중에 하나인 Muskingum-Cunge 8 point 방법과 HEC-RAS의 부정류 해석을 이용한 방법으로 얻은 조도계수를 비교하였다. HEC-HMS의 경우 대상유역인 오산천 유역에 대해 선행연구과정으로 저수지 방류량을 고려한 강우-유출 모형의 매개변수 추정에 관한 연구가 이뤄졌다(2006, 이아름). 선행연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하여 그 중 빈도가 큰 유출사상의 경우에 Sabol 식에 의한 모의 결과가 첨두유량의 재현성이 우수하게 나타남을 확인했다. 따라서 HEC-HMS 모형은 Clark 단위도 방법의 매개변수는 Sabol의 식에 의해 모형을 구성하고 2001년, 2002년, 2004년, 2005년의 사상에 대해 강우량, 기흥 저수지와 이동저수지의 실제 방류량을 이용해 유출량을 산정하였다. 이중 오산천 유역에 대해 선행연구에서 사용된 Muskingum의 하도추적 방법은 Muskingum-Cunge 8 point 방법으로 변경하여 대상유역에서의 조도계수를 산정하였다. HEC-RAS 모형의 부정류 해석은 2002년과 2005년의 사상으로서 상류단 경계조건으로 기흥 저수지의 방류량을 유량수문곡선으로 이용하였고, 하류단 경계조건으로는 회화수위관측소의 수위수문곡선을 이용했다. 대표입경을 이용해 얻은 조도계수를 HEC-HMS, HEC-RAS를 통해 검정한 결과 실측된 유량과 수위를 비교적 잘 재현해 내는 것으로 나타났으나, 조도계수의 보정을 통한 재현 유량과 수위를 비교했을 때, 대표입경을 통해 얻은 조도계수가 보정 조도계수보다 다소 작은 것으로 해석되었다.하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.679-691
• /
• 2002

Volume visualization is an important subarea of scientific visualization, and is concerned with techniques that are effectively used in generating meaningful and visual information from abstract and complex volume datasets, defined in three- or higher-dimensional space. It has been increasingly important in various fields including meteorology, medical science, and computational fluid dynamics, and so on. On the other hand, virtual reality is a research field focusing on various techniques that aid gaining experiences in virtual worlds with visual, auditory and tactile senses. In this paper, we have developed a visualization system for CAVE, an immersive 3D virtual environment system, which generates stereoscopic images from huge human volume datasets in real-time using an improved volume visualization technique. In order to complement the 3D texture-mapping based volume rendering methods, that easily slow down as data sizes increase, our system utilizes an image-based rendering technique to guarantee real-time performance. The system has been designed to offer a variety of user interface functionality for effective visualization. In this article, we present detailed description on our real-time stereoscopic visualization system, and show how the Visible Korean Human dataset is effectively visualized on CAVE.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.520-526
• /
• 2015

Reinforcing bar splices are inevitable in reinforced concrete structure. In these days, there are three main types of splices used in reinforced concrete construction site - lapped splice, mechanical splice and welded splice. Low cost, practicality in construction site, less time consuming and high performance make gas pressure welding become a favorable splice method. However, reinforcing bar splice experiences thermal loading history during the welding procedure. This may lead to the presence of residual stress in the vicinity of the splice which affects the fatigue life of the reinforcing bar. Therefore, residual stress analysis and tensile test of the gas pressure welded splice are carried out in order to verify the load bearing capacity of the gas pressure welded splice. The reinforcing bar used in this work is SD400, which is manufactured in accordance with KS D 3504. The results show that the residual stresses in welded splice is relatively small, thus not affecting the performance of the reinforcing bar. Moreover, the strength of the gas pressure welded splice is high enough for the development of yielding in the bar. As such, the reinforcing bar with gas pressure welded splice has enough capacity to behave as continuous bar.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1175-1183
• /
• 2020

Purpose To evaluate the technical feasibility and clinical efficacy of percutaneous transgastric stent placement after the failure of treatment attempt with the transoral approach in malignant gastroduodenal obstruction patients. Materials and Methods From October 2008 to April 2016, nine patients (M:F = 4:5; mean age = 66 years) with malignant gastroduodenal obstruction underwent stent placement via a gastrostomy tract, which was attributed to the failure of the transoral approach. The primary etiologies of the obstruction were pancreatic (n = 5), gastric (n = 2), and metastatic (n = 2) cancers. Through percutaneous gastrostomy, dual stents (inner bare metal and outer polytetrafluoroethylene-covered) were deployed at the obstruction site. The technical and clinical success rates, as well as complications were evaluated during the follow-up period. Results Stents were successfully inserted in eight patients (88%). We failed to insert stent in one patient due to the presence of a tight obstruction. After stent placement, symptoms improved in seven patients. Gastrostomy tube was removed 9 to 20 days (mean = 12 days) after the stent insertion. During the mean follow-up of 136 days (range, 3-387 days), one patient developed a recurrent symptom due to tumor overgrowth. However, there were no other major complications associated with the procedure. Conclusion Percutaneous transgastric stent placement appeared to be technically feasible and clinically effective in patients who underwent a failed transoral approach.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.4
• /
• pp.329-335
• /
• 2004

Background : The Sequential Organ Failure Assessment (SOFA) score can help to assess organ failure over time and is useful to evaluate morbidity. The aim of this study is to evaluate the performance of SOFA score as a descriptor of multiple organ failure in critically ill patients in a local unit hospital, and to compare with APACHE III scoring system. Methods : This study was carried out prospectively. A total of ninety one patients were included who admitted to the medical intensive care unit (ICU) in Chuncheon Sacred Heart Hospital from May 1 through June 30, 2000. We excluded patients with a length of stay in the ICU less than 2 days following scheduled procedure, admissions for ECG monitoring, other department and patients transferred to other hospital. The SOFA score and APACHE III score were calculated on admission and then consecutively every 24 hours until ICU discharge. Results : The ICU mortality rate was 20%. The non-survivors had a higher SOFA score within 24 hours after admission. The number of organ failure was associated with increased mortality. The evaluation of a subgroup of 74 patients who stayed in the ICU for at least 48 hours showed that survivors and non-survivors followed a different course. In this subgroup, the total SOFA score increased in 81% of the non-survivors but in only 21% of the survivors. Conversely, the total SOFA score decreased in 48% of the survivors compared with 6% of the non-survivors. The non-survivors also had a higher APACHE III score within 24 hours and there was a correlation between SOFA score and APACHE III score. Conclusion : The SOFA score is a simple, but effective method to assess organ failure and to predict mortality in critically ill patients. Regular and repeated scoring enables patient's condition and clinical course to be monitored and better understood. The SOFA score well correlates with APACHE III score.