• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1755-1762
• /
• 2016

In this paper, a small areal dual-output SC(switched capacitor) DC-DC converter with a improved range of an input voltage is presented. The conventional SC DC-DC converter has an advantage of low cost and small chip area. But, it has a narrow input voltage range to convert efficiently. Also, it has a lager chip area and a lower power efficiency from multiple outputs. The proposed SC DC-DC converter improves the power efficiency by using the capacitor array structure which efficiently converts the voltage according to the input voltage. By sharing two switch array, it reduces the number of switches and capacitors from 32 to 25. The proposed SC DC-DC converter was manufactured in a $0.18{\mu}m$ CMOS process. In the simulation, the range of the input voltage is 0.7~ 1.8V, the max. power efficiency is 90%, and the chip area is $0.255mm^2$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.349-354
• /
• 1991

The power output behavior of the binary cycle composed of two Carnot cycles is analyzed with considering heat transfer processes, in which the finitely constant temperature differences between heat sources and working fluids exists. The power output has the maximum value as an extremum for cycle temperatures and capacities of heat exchangers. In the internally reversible cycle, the power output is independent of the cycle temperature in the intermediate heat exchanger. In this case when the total capacities of heat exchangers are given, three heat exchangers have the same capacities at the maximum power output condition. In addition, when the cycle is not extremum for cycle temperatures and capacities of heat exchangers. At the maximum power output condition, the capacity of heat exchanger at the cold side is slightly more than the hot side as the cycle effectiveness decreases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.97-102
• /
• 2006

This paper presents a novel technique of efficiency enhancement for dual mode transmitter. The future dual mode transmitter incorporates an amplifier which generates different level of output for different applications. For WiBro, the output is 1W at 2.3GHz, and for wireless LAN, the output is less than 100mW at 2.4GHz. Simple bias switching is proposed to get the higher efficiency at both of the applications. Without the bias switching the amplifier shows 10% PAE at 20dBm output for wireless LAN, but using a preselected lower bias, the efficiency improves up to 35%. This technique becomes more useful as the need of many function convergence terminals is increasing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.142-145
• /
• 1999

In this paper, delay performances are evaluated and compared for three dual-plane switch architectures; dual input queue/dual switching plane (DQDP The terms of DQDP, DQDP-PS and DQDP-GQ were not used in [Turner88], [Lee96] and [Son97]. All these tern are designated in this letter for convenience.) switch, DQDP with plane selector (DQDP-PS) switch and DQDP based on output group queueing (DQDP-OGQ) switch. We show that under random traffic these switches give almost identical delay performances to that of the output queueing switch but under bursty traffic only the DQDP-PS and the DQDP-OGQ switches ran do.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.204-206
• /
• 2019

본 논문은 이중 확장 칼만 필터를 통한 SOC (State of charge) 및 용량 추정과 배터리 모델 파라미터를 이용한 폐배터리의 최대 출력을 추정하는 방법을 연구 및 제안한다. 배터리의 단순 전압 측정을 통해 상태를 진단할 경우, 부하 조건에 따라 급격한 전압 상승 및 강하로 인해 정밀한 안전 진단 및 운용에 어려움이 따르지만, 폐배터리는 일반 배터리에 비해 전압 변동율이 크기 때문에 상태 진단에 큰 어려움이 존재한다. 따라서 본 논문에서는 폐배터리의 정밀한 안전진단을 하기 위해 SOC 영역 및 충/방전에 따른 최대 출력을 계산하여 사전에 배터리의 상태를 진단할 수 있는 알고리즘을 제안한다. 또한, 배터리의 노화도에 따른 최대 출력을 실험 및 시뮬레이션을 통해 결과를 제시하여 유효한 방식임을 검증한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.561-568
• /
• 2003

There arc two ways in the output voltage control method in PWM inverters. One Is double loop voltage control composed of inner current control loop and outer voltage control loop.'rho other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. However, in case of low output impedance, it shows good control performance in all load ranges than double loop voltage control. In this paper, the rule and the gain of single loop voltage control have been developed analytically and these were verified through computer simulation and experiment.

• Journal of the Korean Society of Radiology
• /
• v.4 no.3
• /
• pp.5-11
• /
• 2010

In this paper, we are suggested development of dual-mode detector for dual-energy digital radiography. Design of dual-energy radiography module for commercial BIS (Baggage Inspection System) is used in the spectrum of the X-ray generator and detector for dual-mode features and radiological characteristics were analyzed. BIS suggestl on the image detector module being used to target X-ray tube to simulate X-ray spectrum and simulated spectrum to offer through the new radiographic characteristics of the detector modules were investigated. Using X-ray experiments with an increase in the thickness of the copper filter low energy detector (LED) and high-energy detector (HED) as the difference between the output signal increases. HED, especially in the size of the output signal decreases with increasing thickness of the copper filter was found.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.719-725
• /
• 2019

We propose a 2.4-GHz CMOS power amplifier (PA) with a bypass structure to improve the power-added efficiency (PAE) in the low-power region. The primary winding of the output transformer is split into two parts. One of the primary windings is connected to the output of the power stage for high-power mode. The other primary winding is connected to the output of the driver stage for low-power mode. Operation of the high power mode is similar to conventional PAs. On the other hand, the output power of the driver stage becomes the output power of the overall PA in the low power mode. Owing to a turning-off of the power stage, the power consumption is decreased in low-power mode. We designed the CMOS PA using a 180-nm RFCMOS process. The measured maximum output power is 27.78 dBm with a PAE of 20.5%. At a measured output power of 16 dBm, the PAE is improved from 2.5% to 12.7%.

• Electronics and Telecommunications Trends
• /
• v.8 no.4
• /
• pp.37-48
• /
• 1993

본 고에서는 출력측에 함유된 고조파를 저감시키기 위하여 2 중 접속 전압원 인버터를 구성하였다. 이 시스템은 기존의 2 중 접속 12스텝 전압원 인버터에 단권 변압기와 복수개의 스위칭 소자로 구성된 탭 변환 회로를 부가하여 이를 스위칭 제어함으로써 인버터 출력의 스텝 수를 증가시켜 출력측 고조파를 저감시킬 수 있는 방법을 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.129-130
• /
• 2006

고출력 마그네트론 발진기는 마이크로파 발생원으로서 식품, 고무, 섬유, 목재, 세라믹, 폐기물 등의 다양한 산업적 프로세스에 응용된다. 여러 가지 새로운 마이크로파 응용분야들이 보고되고 있을 뿐만 아니라 계속 연구되고 있다. 본 연구에서는 3차원 PIC 시뮬레이션 코드를 이용하여 이중 스트랩형 고출력 마그네트론을 모델링하였다. 본 논문에서는 이 마그네트론의 발진모드, 발진주파수, 발진출력 등의 발진 특성 결과가 제시될 것이다.