• Journal of Digital Contents Society
• /
• v.7 no.1
• /
• pp.41-45
• /
• 2006

In this paper, we introduced the dual-band and multi-band slot loaded patch antenna for multi services. This antenna has the characteristic of dual-band and multi-band antenna by 4 slots nearly located in the edges of a patch. By changing the number and location of probe, the width and length of slot, and the distance between slot and the edge of patch, we studied the performance of dual-band and multi-band characteristic.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.215-220
• /
• 2016

In this paper, a wideband antenna accomplished by adding a double sleeve of a rectangular planar monopole structure is proposed. In order to impedance matching of proposed antenna, the antenna performance was improved by adding two gap sleeves and outer sleeve for double sleeve structure. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.5GHz~10.5GHz. The frequency bandwidth is 8GHz. The frequency range of the actual fabricated antenna was 2.92GHz~10.32GHz, the frequency bandwidth is 7.4GHz. The measured radiation pattern frequency is 3GHz, 6GHz and 9GHz. The results are similar with dipole antenna pattern in all frequency. The antenna size is $40{\times}40mm^2$. The utilization possibility of the ultra-wideband planar monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.175-175
• /
• 2012

플라즈마를 이용하는 공정은 평판 디스플레이와 박막 트렌지스터, LCD 같은 반도체 산업에 널리 사용되고 있다. 최근 이와 같은 산업을 위한 공정은 마이크로 단위 이하에서 진행되고 있으며, 그 크기가 작아질수록 공정을 위한 비용은 증가하게 되었다. 따라서 제품의 대량생산 및 원가절감을 위해 웨이퍼의 대구경화가 진행되었고, 그런 대구경의 웨이퍼을 생산하기 위한 대면적 플라즈마 소스 개발 역시도 필요하게 되었다. 그리고 2014년에는 450 mm 크기의 웨이퍼가 사용될 것으로 예상되고 있다. 450 mm 대구경 웨이퍼용 유도결합플라자마 장치를 이용하여 플라즈마의 특성을 Langmuir probe를 사용하여 측정하였다. 플라즈마를 방전시키는 안테나의 형태는 spiral 형태의 안테나를 사용하였고, 이중주파수를 사용하기 위해 spiral 형태의 안테나를 두개로 나누어 안쪽의 안테나에는 2 Mhz를 바깥쪽의 안테나에는 13.56 Mhz를 인가하였다. 공정 압력은 10 mTorr로 유지하고 안쪽의 2 Mhz 안테나에는 100~800 W까지 변화시키고 바깥쪽의 13.56 Mhz 안테나에는 100~1,000 W까지 변화시켜 그 때의 플라즈마의 특성을 분석해 보았다. Langmuir probe를 이용하여 방전된 플라즈마를 관찰한 결과, 기판 위에서의 플라즈마 균일도가 4~23%가 되는 것을 확인 할 수 있었다. 13.56 Mhz의 인가되는 파워를 고정 시키고 2 Mhz만을 변화시켰을 경우 2 Mhz의 파워를 400 W까지 증가시켰을 때는 플라즈마의 밀도가 서서히 증가하였으나 400 W 이상에서는 밀도가 크게 증가하는 것을 볼 수 있었다. 하지만 플라즈마의 온도와 potential의 경우 밀도와는 반대로 2 Mhz에 인가되는 파워가 증가 될수록 감소하는 경향을 보였다. 위의 실험을 통해 우리는 전자에너지분포함수(EEDFs)를 얻을 수 있었고, 그 안에서 낮은 주파수(2 Mhz)를 이용하여 낮은 에너지를 가진 전자의 밀도를 조절할 수 있다는 것과 높은 주파수(13.56 Mhz)에 인가된 파워가 증가함에 따라 높은 에너지를 얻을 수 있다는 결과를 확인 할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2009

In this paper, a novel wideband crossed planar monopole antenna with the multiple resonance characteristics is proposed. The proposed monopole antenna can be designed by a wideband crossed planar monopole antenna with L-shaped slits. In order to generate multiple resonance characteristics on the proposed monopole antenna, the length of L-shaped slit and the number of L-shaped slits are determined at an interesting frequency. The proposed antenna having an omnidirectional radiation pattern and a high gain over the multiple resonance frequency bands, respectively, is suitable for a mobile antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.141-146
• /
• 2009

A triangular microstrip antenna with T-shaped slits is proposed for tunable dual-band applications. The proposed antenna is designed using chip capacitors as a prototype. From this result the capacitor can be replaced to a varactor diode to control capacitance value. Since the input impedance of the antenna can be varied with the value of the chip capacitors on the T-shaped slits, the resonant frequency may be changed. The return losses are better than 10 dB at the lower band of $0.78{\sim}1.21$ GHz and 20 dB at the upper band of $1.97{\sim}2.17$ GHz, respectively. This antenna has the bandwidth of about 10 MHz and 50 MHz at each band. The peak gains of the antenna yield 0 dBi at the lower band and 3 dBi at the upper band, respectively. Details of the antenna design are described, and its performances are presented and analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.41-47
• /
• 2013

This letter describes a dual-band compact monopole antenna with two branches for Wi-Fi applications. The proposed antenna is based on a planar monopole design, and composed of two branches of radiating patches for dual-band operation. The ground size of the antenna matches the ground size of a typical hand-held cellular phone for improved compatibility with mobile phone printed circuit boards. The antenna is designed using a simulator and fabricated with optimized parameters. The fabricated antenna is measured at the lower and higher operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.119-123
• /
• 2005

In this paper. It is proposed and fabricated that the new antenna of dual T type structure is shifted easily center frequency. This antenna consists of dual dipoles resemblance to dual T type, which are fed by a coplanar waveguide (CPW) on signal plane. The analyzed and measured characteristic of new antenna is controled between distance of two dipoles for shifting center frequency. The proposed antenna is 450MHz bandwidth for using IMT2000 band. The characteristic parameters of the proposed antenna are analyzed by using a FDTD methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2615-2618
• /
• 2009

Double rectangular patch with 4-bridges is investigated for solution of IEEE 802.11b/g (2.4 GHz) and 802.11a (5.5 GHz). Rectangular patch for 5.5 GHz frequency band is printed on the PCB substrate and connected to another rectangular patch for 2.4 GHz frequency band with 4-bridges to obtain dual band operation in an antenna element. 4-bridges can modify the desired frequency band from its original frequency band by changing its width. Gain of 2.4 GHz patch is 5 dBi and 5.5 GHz patch is 3.7 dBi at ${\theta}=0^{\circ}$.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1003-1008
• /
• 2017

In this paper, we studied the design and fabrication of double T Structure with CPW antenna at around 5 GHz band.. To improve of frequency properties of antenna, Double T Structure with CPW antenna was simulated by HFSS(: High Frequency Structure Simulator). A double T Structure with CPW antenna was designed and fabricated by photolithograph on an FR4 substrate (dielectric constant of 4.4 and thickness of 1.6 mm). The fabricated A double T Structure with CPW antenna showed a center frequency, the minimum return loss and impedance were 5.29GHz, -34dB, and 390MHz, $49.6{\Omega}$ respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2015

In this paper, we studied the design and fabrication of dual T type antenna to be used in LTE communication systems operating at around 1.8 GHz band. In order to improve of frequency properties of antenna, single feed microstrip patch antenna and CPWG antenna was simulated by HFSS(High Frequency Structure Simulator). The fabricated dual T type antennat showed that the measured center frequency, the minimum return loss and -10dB bandwidth were 1.79 GHz, -23.26 dB and 23 MHz, respectively.