• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.693-700
• /
• 2018

Virtual router redundancy protocol (VRRP) was designed as a solution to support fast fail-over in case of network failure. There exists virtual router which acts as default gateway in LAN, and the virtual router is dynamically elected between master and backup router. Through this protocol, end-hosts can be provided seamless network service. However, it needs expensive license fees and maintenance costs to adopt current commercial network operating systems. Furthermore, they are commonly enterprise proprietary software and inherently closed source. In order to tackle these problem, Open N2OS which is open source based open network software platform was developed. It has no dependency on hardware equipment, and provides high availability, scalability, various networking functions. In this paper, we handle VRRP operation and mechanism with related command line interface (CLI).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1399-1404
• /
• 2015

This paper analyzed the phenomenon of drain induced barrier lowering(DIBL) for the ratio of channel length vs. thickness of asymmetric double gate(DG) MOSFET. DIBL, the important secondary effect, is occurred for short channel MOSFET in which drain voltage influences on potential barrier height of source, and significantly affects on transistor characteristics such as threshold voltage movement. The series potential distribution is derived from Poisson's equation to analyze DIBL, and threshold voltage is defined by top gate voltage of asymmetric DGMOSFET in case the off current is 10^-7 A/m. Since asymmetric DGMOSFET has the advantage that channel length and channel thickness can significantly minimize, and short channel effects reduce, DIBL is investigated for the ratio of channel length vs. thickness in this study. As a results, DIBL is greatly influenced by the ratio of channel length vs. thickness. We also know DIBL is greatly changed for bottom gate voltage, top/bottom gate oxide thickness and channel doping concentration.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.981-984
• /
• 2011

A high-resolution numerical study is carried out to investigate the transient process of the combustion and the shock-train developments in an ethylene-fueled direct-connect dual-mode scramjet combustor. Following the fuel injection, air-throttling is applied at the expansion part of the combustor to provide mass addition to block the flow to subsonic speed. The ignition occurs several ms later when the fuel and air are mixed sufficiently. The pressure build up by the combustion leads to the shock train formation in the isolator section that advances to the exit of the intake nozzle. Then, the air-throttling is deactivated and the exhaust process begins and the situation before the air-throttling is restored. Present simulation shows the detailed processes in the dual-mode scramjet combustor for better understanding of the operation regimes and characteristics.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.633-640
• /
• 2005

This paper proposes and analyzes a message scheduling scheme and corresponding bandwidth allocation method for the hard real-time communication on dual standard 802.11 Wireless LANs. By making the superframeof one network precede that of the other by half, the dual network architecture can minimize the effect of deferred beacon and reduce the worst case waiting timeby half. The effect of deferred beacon is formalized and directly considered to decide the polling schedule of PCF phase. Simulation results executed via ns-2 show that the proposed scheme can improve the schedulability by 3$36\%$ for real-time messages and give $9\%$ more bandwidth to non-real-time messages for the given stream sets, compared with the network whose bandwidth is just doubled with the same MAC.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.544-549
• /
• 2014

Double layered film consisting of polyimide/polysiloxane and interface with nano domain structure was fabricated through stepwise layer formation and subsequent aging steps. During aging of film, nano phase separation occurred between the top layer polysiloxane and the upper layer of polyimide, which was observed by transmission electron microscope (TEM). A stable and uniform polysiloxane layer was obtained, showing the reproducible pressure-sensitive adhesion (PSA) property with the peel strength of 8-13 g/inch at even $300^{\circ}C$. In addition, the resulting polymide/polysiloxane film was thermo-stable up to $435^{\circ}C$, providing the promising properties suitable for application in microelectronics processing.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.211-218
• /
• 2007

Dual-polarization means to use two orthogonal polarizations, namely two independent channels in communication. This can be used to deal with high datarate caused by large amount of observed data in future LEO satellite. However, when two orthogonal polarizations are not perfectly independent to each other in practical, interference is probably raised in each channel, meaning that noise level in passband increases. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonal polarized to the transmitting antenna. In this paper, the influence of XPD on the communication between satellite and ground station was analyzed under the assumption that X-Band dual-polarization was applied to KOMPSAT-2 (KOrea Multi-Purpose SATellite-2). Through analysis, it was shown that more than 3dB of link margin was still achievable despite of worst axial ratio, 2.5dB, at ground station antenna when axial ratio of satellite antenna was about 0.5dB under 99% of environmental availability.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.193-199
• /
• 2009

Powerline communications (PLC) technology has been discussed and analyzed as a highly potential candidate of wireline access network solutions. In this paper, performance of double binary turbo coded orthogonal frequency division multiplexing (OFDM) system is analyzed and simulated in power line communications channel. In order to make power line channel environments, Bernoulli-Gaussian noise is considered. The performance is evaluated in terms of bit error probability. From the simulation results, it is demonstrated that the double binary turbo coding scheme offers considerable coding gain with reasonable encoding complexity. It is also shown that the system performance can be substantially improved by increasing the number of iterations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.21-27
• /
• 2016

In removable dental prostheses, it is important to minimize impairment of residual tissue caused by wearing dentures. There are two factors that harm residual tissue. The first is functional load bearing of remaining teeth and alveolar ridges and the second is the effect of poor oral hygiene. Double crown retained removable dental prostheses provide rigid support, and it may reduce impairment caused by load bearing of alveolar ridges. Also, dental plaque and oral deposits, which are attached to outer crowns and dentures, can be easily managed extra-orally. In addition, it is beneficial to the health of the marginal gingiva because inner crowns have easy access for oral hygiene. In this case, double crown retained removable dental prostheses were used for the partially edentulous patient with severe residual alveolar bone resorption and poor oral hygiene, and the result was clinically satisfactory in terms of functional, esthetical, and oral hygiene aspects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.971-982
• /
• 2008

In this paper, we propose a new digital duplexing scheme, called SDD(Synchronous Digital Duplexing), which can increase data efficiency and flexibility of resource by transmitting uplink signal and downlink signal simultaneously. In order to transmit uplink data and downlink data simultaneously, the proposed SDD obtains mutual informations between AP(access point) and each SSs(subscriber station), SS and other SSs by mutual ranging procedure. These informations are used for selection of transmission time, decision of CS insertion, setting of CS length, and FFT duration resetting, etc. It is shown that the proposed SDD is appropriate for duplexing scheme in indoor environments over the conventional TDD(Time Division Duplexing) and FDD(Frequency Division Duplexing).