• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.15-23
• /
• 2007

This paper describes a dual frequency synthesizer designed in a 0.2$\mu$m CMOS technology for wireless LAN applications. The design is focused mainly on low-power characteristics. Power dissipation is minimized especially in VCO and prescaler design. The designed synthesizer includes all building blocks for elimination of external components, other than the crystal. Its operating frequency can be programmed by external data. It operates in the frequency range of 2.3GHz to 2.7GHz (RF) and 250MHz to 800MHz (IF) and consumes 5.14mA at 2.5GHz and 1.08mA at 0.5GHz from a 2.5V supply. The measured phase noise is -85dBc/Hz in-band and -105dBc/Hz at 1MHz offset at IF band. The die area is 1.7mm$\times$1.7mm.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.223-226
• /
• 2002

본 논문에서는 프로브 급전 방식을 사용하여 무선 LAN용 주파수 대역인 2.4GHz와 5.775GHz 대역에서 동작하는 이중공진 패치 안테나를 설계 및 제작하였다. 이 때 상대급전의 임피던스 변화를 최소화하기 위하여 50$\Omega$ 급전위치를 찾아 설계하였으며, 각 소자간의 영향을 고려하여 충분한 거리를 두어 실험하였다. 안테나 성능 전산모의실험에는 Ensemble을 사용하였다 또한 5.775GHz 대역의 임피던스를 정합하기 위하여 접지와 단락을 시켰으며, 2.4GHz 대역의 임피던스를 정합하기 위하여 패치 모양을 변화시켰다. 측정된 결과를 보면 2.4GHz, 5.775GHz 대역에서 반사손실은 각각 -l4㏈, -l2㏈의 값을 나타냈으며, 전압정재파비는 2.0이하의 특성을 보였다

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.337-341
• /
• 2011

This paper presents the design of a novel integrated mobile antenna for vehicles. The proposed antenna fabricated on a low cost easily available FR4 substrate, which effectively covers both dual band operation. The proposed mobile antenna is a modified G-type patch antenna that can operate in various frequency bands, GSM (880~960 MHz), AMPS (824~894MHz), DCS (1710~1880MHz), PCS (1850~1990MHz), UMTS (1920~2170). Experimental results indicate that the impedance bandwidth (VSWR 1:2.5) of the proposed mobile antenna agree that of the simulation results. It was validated that the configuration can meet the demands of Mobile frequency bands and effectively enhanced the impedance bandwidth to 36.46% for the lower band and 27.84% for the upper band. This paper also presents and discusses the 3D radiation patterns and gains according to the results of the experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.70-72
• /
• 2011

In this paper, Dual-band monopole antenna for MIMO system is proposed. At this time the FR-4 substrate was used as a dielectric is 4.4, the size of 83mm * 50mm * 1.6mm size 3mm, the width of the proposed antenna by a $50{\Omega}$ microstrip line feed, and, LTE in the frequency 746-787MHz, 1710-1755MHz has been designed to operate at the resonant frequency less than-10dB and showed a good return loss in the operation.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.34-39
• /
• 2015

In this paper, a design of an offset Cassegrain antenna is proposed for Ku and Ka dual-band without increasing the antenna size. For Efficiency of computation and implementation, the frequency selectivity surface (FSS) of reflecting the Ka-band signal and passing the Ku-band is provided for the sub-reflector instead of the main reflector. The proposed FSS hyperboloid sub-reflector is the periodic structure of a unit cell comprising octagon metal rings embedded in the multiple layers. The proposed design is verified for 19 GHz and 45 GHz bands by the use of precise electromagneitc-field simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.265-271
• /
• 2015

In this paper, Dualband meander microstrip antenna is proposed for Wireless Body Area Network application. Designed antenna is mounted on the phantom to maintain a constant distance of the substrate, and studied the characteristics related to change in several meaningful parameters to improve performance. Characteristics of antenna, returnloss, radiation pattern, gain, bandwidth, are analyzed using Computer Simulation Technologes(CST) software. The proposed antenna operates at 4.33Ghz and 6.09GHz ~ 9.88GHz for UWB. The antenna showed that returnloss and -10dB bandwidth are -42.30dB and 410Mhz at 4.33GHz, maximum -29.11dB and 3.75GHz at 6.1GHz ~ 9.8GHz.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.71-77
• /
• 2023

In this paper, a dual-band stopband frequency selective surface that can be applied to Wi-Fi 6E systems is designed to block external interfering signals with adjacent operating frequency spectrum in indoor wireless LAN environments. The proposed frequency selective surface structure has frequency blocking characteristics in the 2.4GHz and 6GHz bands, and is realized through a modified crossed dipole structure and an interlocking puzzle form between unit structures. The proposed structure is designed to have stable frequency response characteristics with respect to incident angle and polarization, and the experimental results show good agreement with the simulation results for incident waves from 0° to 45°.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.1
• /
• pp.47-52
• /
• 2008

In this paper, the small PIFA with dual bandwidth using LTCC is the proposed. The proposed PIFA is designed and fabricated for dual resonance bands (K-PCS and WiBro). It consists of two layers. The bottom layer shape PIFA has 120MHz bandwidth (1.727 ~ 1.847 GHz), it satisfied K-PCS. The top layer shape stacked element has 110MHz bandwidth (2.302 ~ 2.412 GHz), it satisfied WiBro. The top layer is stacked on the bottom layer for electric coupling. Maximum radiation gain of K-PCS, WiBro bands are 2.11 dBi, 3.71 dBi respectively. For miniaturization of the antenna structure, the PIFA using LTCC ( ${\varepsilon}_r\;=\;8$ ) chip is fabricated. The proposed PIFA shows the effect of SAR reduction also. A defect that is fabricated by stacking up the layers in the design of PIFA is complemented by fabricated in using LTCC chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1296-1302
• /
• 2012

In this research, optimization of a dual-band dipole array was performed using genetic algorithm. A non-uniform, aperture-shared linear array was configured with dipoles which resonate at 4 GHz and 9.5 GHz. The excited current distributions on dipoles were computed considering mutual coupling between dipole elements. The current distributions were also computed using method of moment (MoM). The optimization using genetic algorithm was performed to obtain the low sidelobe levels in two operating frequency band. The PSLs of the optimized array for 4 GHz and 9.5 GHz are -15.7 dB and -17 dB, respectively. Comparison between computed and simulated results are also discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.19-24
• /
• 2005

This paper presents design simulation, implementation, and measurement of a miniaturized GPS/K-PCS dual-band LTCC chip antenna for mobile communication handsets. The dimension of LTCC chip antenna is $9mm\times15mm\times1.2mm$. The meander type radiating patch for dual-band operation is realized by using via holes with 0.3mm height to connect upper and lower-layer antenna. The lower meander type antenna is to be tuned to the lower frequency (GPS) band. The upper meander antenna with via hole connection is to contribute the higher frequency (K-PCS) band. The resonant frequency and frequency ratio of the proposed antenna can be adjusted by changing the height of via-hole and effective path of meander radiating patch. The electrical characteristics of the meander chip antenna applied to a GPS/K-PCS are suitable for mobile communication application.