• 제목/요약/키워드: 이종동형

검색결과 24건 처리시간 0.022초

운동 역학의 개념형성 정도와 재학습을 통한 학습효과 분석 (Learning Outcomes Analysis Using by Degree of Concept and Repetition Learning of Motion Mechanics)

  • 장석정;이종길
    • 한국실천공학교육학회논문지
    • /
    • 제4권2호
    • /
    • pp.46-52
    • /
    • 2012
  • 본 연구에서는 이미 운동역학 단원을 수강한 중학교 1학년에서 3학년까지의 학생을 대상으로 연구하였다. 학생들을 대상으로 반복 학습 전과 후의 동형검사를 이용해 테스트 한 결과 반복학습이 효과적이며, 학습전보다 과학에 대한 관심도가 더 높은 것으로 나타났다. 연구에 참여한 세 집단이 동일한 개념을 학습했으나 개념 형성 시기가 다른 점을 고려해 연계적으로 반복 심화 학습하는 것이 좀 더 높은 학습 효과를 얻을 수 있는 것으로 나타났다.

  • PDF

열풍동형 폴리실리콘 마이크로 액츄에이터의 제작 및 특성 분석 (Fabrication of thermally driven polysilicon micro actuator and its characterization)

  • 이종현
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 춘계학술대회 논문집
    • /
    • pp.146-150
    • /
    • 1996
  • A thermal micro actualtor has been fabricated using surface micromachining techniques. It consists of doped ploysilicon as a moving part and TEOS(Tetra Ethyl Ortho Silicate) as a sacrificial layer. The polysilicon was annealed for the reduction of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE(vapor phase etching)process was also used as an effective release method for the elimination of sacrificaial layer. With noliquid involved during any of the steps for relasing, unlike other reported relase techniques, the HF VPE pocess has produced polysilicon microstructures with virtually no process-induced stiction problem. The actuation is incured by the thermal expasion due to current flow in active polysilicon cantilever, which motion is amplified bylever mechanism. The thickness of pllysilicon is 2 .mu. m and the length of active and passive polysilicon cantilever are 500 .mu. m, respectively. The moving distance of polysilicon actuator was experimentally conformed as large as 21 .mu. m at the input voltage level of 10 V and 50Hz square wave. These micro actuator technology can be utilized for the fabrication of MEMS (microlectromechanical system) such as microrelay, which requires large displacement or contact force but relatively slow response.

  • PDF

자기유변유체를 이용한 반능동형 스퀴즈 필름 댐퍼의 해석 및 회전체 불균형 응답 제어 (Analysis of Magneto-rheological Fluid Based Semi-active Squeeze Film Damper and its Application to Unbalance Response Control of Rotor)

  • 김근주;이종원
    • 한국소음진동공학회논문집
    • /
    • 제15권3호
    • /
    • pp.354-363
    • /
    • 2005
  • Squeeze film dampers (SFDs) have been commonly used to effectively enhance the dynamic behavior of the rotating shaft supported by rolling element bearings. However, due to the recent trends of high operating speed, high load capacity and light weight in rotating machinery, it is becoming increasingly important to change the dynamic characteristics of rotating machines in operation so that the excessive vibrations, which may occurparticularly when passing through critical speeds or unstable regions, can be avoided. Semi-active type SFDs using magneto-rheological fluid (MR fluid), which responds to an applied magnetic field with a change in rheological behavior, are introduced in order to find its applications to rotating machinery as an effective device attenuating unbalance responses. In this paper, a semi-active SFD using MR fluid is designed, tested, and identified to investigate the capability of changing its dynamic properties such as damping and stiffness.In order to apply the MR-SFD to the vibration attenuation of a rotor, a systematic approach for determining the damper's optimal location is investigated, and also, a control algorithm that could improve the unbalance response characteristics of a flexible rotor is proposed and its control performance is validated with a numerical example.

공침법으로 제초한 SrTiO$_3$바리스터의 전기적 특성 (The Electric Properties of SrTiO$_3$Varistor Prepared by Co-precipitation Process)

  • 이종필;신현창;최정철;최승철
    • 마이크로전자및패키징학회지
    • /
    • 제7권3호
    • /
    • pp.7-11
    • /
    • 2000
  • 공침법을 이용하여 제조한 $SrTiO_3$분말에 $CuO-SiO_2$첨가물을 혼합하여 저전압구동형 SrTiO$_3$세라믹 바리스터 소자를 제조하였다. $CuO-SiO_2$첨가물을 이용한 $SrTiO_3$세라믹 바리스터제조 공정은 복잡한 공정을 단순화시킬 수 있을 뿐만 아니라, 일반적인 소결온도보다 100~$150^{\circ}C$ 낮은 온도에서도 소결이 되었다. 이 바리스터의 비직선계수($\alpha$) 값은 첨가물 5 wt% 혼합하여 $1350^{\circ}C$에서 하소한 시편에서 8.47의 최고값을 나타냈으며, 이때의 구동전압은 7 V 이하로 낮은 구동전압을 가진 바리스터를 제조할 수 있었다.

  • PDF

자기유변유체를 이용한 반능동형 스퀴즈 필름 댐퍼의 해석 및 회전체 불균형 응답 제어 (Analysis of Magneto-rheological Fluid based Semi-active Squeeze Film Damper and Its Application to Unbalance Response Control of Rotor)

  • 김근주;이종원
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.1005-1011
    • /
    • 2004
  • Squeeze film dampers (SFDs) have been commonly used to effectively enhance the dynamic behavior of the rotating shaft supported by rolling element bearings. However, due to the recent trends of high operating speed, high load capacity and light weight in rotating machinery, it is becoming increasingly important to change the dynamic characteristics of rotating machines in operation so that the excessive vibrations, which may occur particularly when passing through critical speeds or unstable regions, can be avoided. Semi-active type SFDs using magneto-rheological fluid (MR fluid), which responds to an applied magnetic field with a change in rheoloaical behavior, are introduced in order to find its applications to rotating machinery as an effective device attenuating unbalance responses. In this paper, a semi-active SFD using MR fluid is designed, tested and identified by means of linear analysis to investigate the capability of changing its dynamic properties such as damping and stiffness. Furthermore, the proposed device is applied to a rotor system to investigate its potential capability for vibration attenuation: an efficient method for selecting the optimal location of the proposed damper is introduced and control algorithm that could improve the unbalance response properties of a flexible rotor is also proposed.

  • PDF

문장제 해결에서 구조-표현을 강조한 학습의 교수학적 효과 분석 (Analysis of Effect of Learning to Solve Word Problems through a Structure-Representation Instruction.)

  • 이종희;김부미
    • 대한수학교육학회지:학교수학
    • /
    • 제5권3호
    • /
    • pp.361-384
    • /
    • 2003
  • 본 연구는 연립일차방정식에 관한 문장제에서 IDEAL 문제 해결 모형을 바탕으로 "구조-표현"을 강조한 교수-학습을 실시하였을 때 학생들의 문제해결 과정을 탐구하였다. 연구 결과, 구조-표현을 강조한 학급의 학생들이 이를 강조하지 않은 학급의 학생들보다 문제해결 능력이 향상되었으며, 동치문제, 동형문제, 유사문제를 더 정확하게 구별하였다. 또한, 구조-표현을 강조한 학급의 학생들이 그렇지 않은 학급의 학생들보다 문맥에 대한 이해 및 불완전한 정보 추출에서의 오류, 미지수간의 내적 관계에 대한 수학적 기호표현으로의 불완전한 전이 오류, 적절하지 않은 방정식 생성 오류의 발생 빈도가 적었다. 그리고, IDEAL 문제 해결 모형의 문제의 확인 단계(I)와 문제의 정의 단계(D)에서 학생들이 문제 해결 계획을 수립하기 위해 문제를 읽고 이해하여 문제를 해결하는 과정을 중점적으로 분석한 결과, 직접 변환 모델과 구조 도식 모델이 나타났다.

  • PDF

돼지 Duroc 품종에서 A-FABP promoter의 다형성과 성장형질의 연관성 (Association Between the Polymorphism in the Promoter Region of Porcine A-FABP Gene and Growth Traits in Duroc Pigs)

  • 한상현;조인철;이종언;김효선;이정규;전진태;오문유;고문석
    • Journal of Animal Science and Technology
    • /
    • 제48권1호
    • /
    • pp.21-28
    • /
    • 2006
  • 지방세포 내에서 자유 지방산과의 결합수송과 근내지방의 축적에 핵심적인 역할을 담당하는 지방세포 지방산결합단백질 유전자(A-FABP)의 promoter 영역에서 다형성(T-406C)를 SSCP에 이은 DNA 염기서열 분석을 통해 돼지 Duroc 품종에서 확인하였다. 이 돌연변이 406C는 전사인자 nuclear factor 1의 결합 활성을 변화시킬 수 있는 돌연변이로 확인되었다. Duroc 집단에서 HinfⅠ-RFLP 방법으로 유전자형을 결정한 결과 세 종류(TT, TC, CC)의 유전자형을 확인하였고, 빈도는 각각 42.3, 44.3, 13.4%로 확인되었다. 발견된 유전자형과 성장형질간의 상관관계를 통계적으로 유의성을 분석했을 때, 406C/ (TC와 CC)인 돼지의 20주령 체중이 TT인 돼지에서보다 더 무거운 양상을 보이며 유의한 차이를 보였고(P<0.05), 생시체중, 3주령, 10주령 체중에서는 유의한 차이가 발견되지 않았다. 동형접합인 406C/C 돼지들은 406T/인 돼지들에 비해 일당증체량, 90kg 도달일령, 사료효율 면에서 유의적인 차이를 나타내었다. 또한, 등지방두께의 변화와는 무관하게 등심단면적과 정육률에서 유의적인 차이를 확인하였고, CC 동형접합인 돼지에서 더 높은 수치를 나타내었다(P<0.05). 이상의 결과들을 토대로, A-FABP 유전자의 promoter 상에서 발견된 돌연변이인 T-406C는 생육 후반기에서 체중과 등심단면적의 증가에 중요한 역할을 담당하고 있다고 사료되며, 생육 후기 근내지방의 축적과 관련되어 있는 것으로 사료된다. 본 연구에서 발견한 유전자의 다형성은 Duroc 품종의 육종을 위한 분자 marker로서 유용하게 이용될 것으로 사료된다.

Genetic Polymorphism in Corticotropin-releasing Hormone Receptor Type-1 in Preeclamptic Korean Women

  • Lim, Ji-Hyae;Kim, Shin-Young;Park, So-Yeon;Kim, Do-Jin;Kim, Mi-Jin;Ahn, Hyun-Kyong;Han, Jung-Yeol;Kim, Moon-Young;Park, Hyun-Young;Lee, Kwang-Soo;Kim, Young-Ju;Ryu, Hyun-Mee
    • Journal of Genetic Medicine
    • /
    • 제8권2호
    • /
    • pp.113-118
    • /
    • 2011
  • 목적: Corticotropin-releasing hormone receptor type 1(CRHR1)은 자간전증과 같은 비정상적인 태반의 기능을 가지는 산모에서 감소되어 나타나며, 그것의 발현이나 기능은 유전적으로 영향을 받는다. 이번 연구의 목표는 한국인에서 CRHR1 유전자 다형성인 c.33+8199C>T과 자간전증 사이의 연관성을 조사하는 것이었다. 대상 및 방법: CRHR1 유전자 다형성은 SNapShot kit와 ABI Prism3100 Genetic analyzer를 이용하여 203명의 자간전증 임산부와 211명의 정상 임산부에서 측정되었고, 유전자 다형성과 자간전증 위험도 사이의 연관성을 분석하였다. 결과: CRHR1 유전자 다형성의 유전자형과 대립유전자 빈도는 자간전증 임산부와 정상 임산부 사이에 다르지 않았다. 자간전증 발생 위험도는 분석된 유전자 다형성의 드문 대립 형질(C)을 지닌 이종접합 유전자형(TC)이나 동형접합 유전자형(CC)을 수반하는 그룹에서 증가되지 않았다. CRHR1 유전자의 동형접합 유전자형(CC)을 수반하는 그룹에서 중증 자간전증과 조기 자간전증과 같은 자간전증의 합병증 발병 위험에도 차이가 없었다. 결론: 이 연구는CRHR1 유전자 다형성인 c.33+8199C>T가 한국인 임신부의 자간전증 발생과 연관이 없음을 나타낸다.

제주마에서 월라 모색의 유전적 특성 (Genetic Characterization of Wolla Coat Color in Jeju Horses)

  • 김남영;신광윤;이종언;한상현;이성수;박용상;고문석;홍현주;양재혁;장덕지;양영훈
    • Journal of Animal Science and Technology
    • /
    • 제54권5호
    • /
    • pp.375-379
    • /
    • 2012
  • 본 연구는 제주마 월라(Wolla) 모색의 백반형태 (Tobiano, frame Overo, sabino)에 대해 유전학적 특성을 구명하고자 수행하였다. 제주마 376두 (월라 142두, 비월라 234두)에 대해 Tobiano 모색 확인을 위해 ECA3-inversion을 분석하였으며, frame Overo 모색은 EDNRB 2-bp 염기치환 상태를 확인하였고, sabino 모색인자형 확인은 KIT intron 16 SNP를 분석하였다. 제주마 월라 모색 개체에서 ECA3-inversion 유전자형이 +/To 이형접합 형태가 140두 (0.986), To/To 동형접합 형태 2두 (0.013)가 나타나 제주마 월라 모두에서 ECA3-inversion이 확인되었다. 반면에 EDNRB와 KIT intron 16 SNP에서는 frame Overo나 sabino 인자는 나타나지 않았다. 제주마 비월라에서는 ECA3-inversion, EDNRB 그리고 KIT intron 16 SNP에서 백반형태와 관련된 인자는 나타나지 않았다. 따라서, 본 연구 결과 제주마 월라(Wolla) 모색은 모색 유전학적 분류에서 Tobiano 모색 유형에 속하는 것으로 사료된다.

비육돈의 도체형질과 A-FABP Promoter 유전자형의 연관 분석 (The Association between A-FABP Promoter Genotype and Carcass Traits in Pigs)

  • 한상현;조인철;이종언;고문석;성필남;박범영
    • 한국축산식품학회지
    • /
    • 제27권3호
    • /
    • pp.382-386
    • /
    • 2007
  • 본 연구는 비육돈에서 지방세포지방산결합단백질(A-FABP) 유전자의 유전자형과 도체형질의 상관관계를 조사하였다. 유전자 A-FABP의 프로모터 영역에 대해 HinfI-RFLP를 이용하여 유전자형을 조사한 결과 두 가지 유전자형(-406T/T T/C)들이 발견되었고 C/C는 발견되지 않았다. 유전자형 중 -406C/C 동형접합자가 발견되지 않는 이유는 비육돈 생산에 관여하는 돼지 품종들 중에서 Duroc 품종만이 이 유전자에 대한 고도의 다형성을 나타내기 때문으로 추정되었다. 유전자형 -406C/-를 나타내는 돼지들은 근내지방과 도체중이 통계적으로 유의적인 증가함을 나타내었으나 (p<0.05), 그 외의 도체형질들(조지방, 육색, 조직감, 수분 삼출도, 근육분리도)은 유의한 차이를 나타내지 않았다 (p>0.05). 본 연구를 통해 돼지 A-FABP 유전자의 -406C/- 유전자형이 근내지방에 대한 유용한 분자 마커가 될 수 있을 뿐만 아니라 다형성이 비육돈의 근내지방에 대한 유용한 분자 마커가 될 수 있으며, 특히 Duroc 품종을 최종 종모돈으로 이용할 경우 이 유전자형을 보유한 돼지를 이용하는 분자육종체계에서 marbling이 잘 된 돼지의 생산을 통한 육질 개선에 기여할 것으로 사료된다.