• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.120-122
• /
• 2005

An alumina membrane with nano-sized pore array by anodic oxidation using thin film aluminum deposited on silicon wafer was fabricated. It is important that the sample prepared by metal deposition method has a flat aluminum surface and a good adhesion between the silicon wafer and the thin film aluminum. The oxidation time was controlled by observation of current variation. While the oxalic acid with 0.2M was used for low voltage anodization under 100V, the chromic acid with 0.1M was used for high voltage anodization over 100V. The nano-sized pores with diameter of 60~120nm was obtained by low voltage anodization of 40~90V and those of 200~300nm was obtained by high voltage anodization of 120~160V. Finally, the sample was immersed to the phosphoric acid with 0.1M concentration to etching the barrier layer. The sample will be applied to electronic sensors, field emission display, and template for nano-structure.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.465-474
• /
• 2011

In this study, a microgenetic algorithm was used to find the optimum cross-section and shape of dome structures. The allowable stress and Euler buckling stress were considered constraints when the weight of the trusses was minimum. The design optimization of the truss structures involved arriving at the optimum sizes of the cross-section and geometric coordinate. The features of the proposed method, which helped in the modeling of and application to the optimal design of truss structures, were demonstrated using the microgenetic algorithm, by solving sample problems.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.58-63
• /
• 2014

This paper deals with the effects of counterpart materials on the wear behavior of thermally sprayed STS316 coatings. STS316 powders were flame-sprayed onto a carbon steel substrate. Dry sliding wear tests were performed using the applied loads of 15 N. AISI52100, $Al_2O_3$, $ZrO_2$ and $Si_3N_4$ balls were used as counterpart materials. Wear behavior of STS316 coatings against different counterpart materials were studied using a scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS). The results show that the wear behavior of thermally sprayed STS316 coatings strongly depends on the type of counterpart material. Dominant wear mechanism was similar for all studied materials as failure of adhesion film except for Si3N4 used as counterpart material. In the case of Si3N4 used as counterpart material, dominant wear mechanism was abrasion.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.538-538
• /
• 2012

최근 기후변화에 따른 이상홍수의 발생으로 인하여 댐의 수문학적 안정성 확보가 필요하다. 이에 따라 댐의 비상여수로를 건설하여 이상홍수에 대비한 대책을 마련하고 있다. 여수로의 운영상 고유속의 흐름이 방류되는데 이때 공동현상이 발생하며, 공동현상으로 인해 발생된 공동이 파괴되면서 구조물에 큰 피해를 주고 있다. 이러한 피해예방을 위해 현재까지 개발된 가장 경제적이고 효과적인 대책은 공기혼입장치이며, 국내에는 최근에 적용되고 있으나, 세부적인 설계기준과 설계기법, 절차등이 부족한 현실이다. 본 연구에서는 여수로 구조물을 대상으로 발생하는 공동현상에 대해서 이론적, 실험적인 분석을 실시하고자 한다. 공동현상에 대한 이론적인 배경과 최근의 연구동향을 분석하고, 국내 기존댐에 적용한 공기혼입장치 설치에 대해서 사례연구를 실시하여 적정성을 검토하였다. 또한 여수로의 대표단면인 개착식 여수로의 구형단면에 대해서는 주암조절지댐을 선정하고 터널식 여수로의 원형단면에 대해서는 임하댐 비상여수로를 대상구조물로 선정하여 각각 1차원 수치해석을 실시한 결과를 토대로 공기혼입장치의 위치 및 최적규모를 산정하고자 한다. 1차원 수치해석을 통해 분석된 공동현상 및 공기혼입장치에 대해서 3차원 수치해석을 실시하여 압력변화 및 공기혼입량등 공기혼입장치의 설치전과 설치후에 대한 효과를 검증하고 마지막으로 수리모형실험을 실시하여 1차원, 3차원 수치해석 결과에 대한 검증과 구조물의 안정성 증대를 확인하고, 추후 기타 여수로 구조물의 설계시 참고할 수 있는 기초자료가 될 수 있도록 하고자 한다.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.95-100
• /
• 2018

The purpose of this study was to investigate the effects of cognitive programs on cognitive function improvement in patients with mild dementia. The subjects were 30 patients with mild dementia. The subjects were applied the cognitive rehabilitation program three times a week for 6 weeks and analyzed the pre-experiment and post-experiment values through the Korean simplified mental state examination (MMSE-K). The results were as follows: The mean of test was increased and statistically significant. Thus, cognitive rehabilitation programs for patients with mild dementia are effective interventions to improve cognitive function in patients with dementia.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.4
• /
• pp.69-80
• /
• 2018

In this study, an algorithm applying deep learning to the truss structures was proposed. Deep learning is a method of raising the accuracy of machine learning by creating a neural networks in a computer. Neural networks consist of input layers, hidden layers and output layers. Numerous studies have focused on the introduction of neural networks and performed under limited examples and conditions, but this study focused on two- and three-dimensional truss structures to prove the effectiveness of algorithms. and the training phase was divided into training model based on the dataset size and epochs. At these case, a specific data value was selected and the error rate was shown by comparing the actual data value with the predicted value, and the error rate decreases as the data set and the number of hidden layers increases. In consequence, it showed that it is possible to predict the result quickly and accurately without using a numerical analysis program when applying the deep learning technique to the field of structural analysis.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.3
• /
• pp.69-76
• /
• 2019

A Beam String Structure (BSS) is a type of hybrid structures, which is composed of upper structural members, lower strings, and struts. Due to the advantages that the pre-tensioned strings elicit pre-caber of the upper structural members, the deflection can be greatly reduced without increasing the structural member size. In this study, a two-way beam string structure is proposed to endure bi-directional loading. The two-way beam string structure consists of two cable parts, namely, sagging and arch-shaped cables. A parametric study is presented aimed at proposing design guide lines of the two-way beam string structures. Numerical finite element analyses through the ABAQUS package were implemented to obtain their behaviors.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.6-7
• /
• 2019

본 논문에서는 양방향 전력 전송을 가능케 해주는 Dual-active-bridge (DAB) 컨버터에서, 고주파 변압기 대신 무선 전력 전송 코일을 이용한 시스템을 제안한다. 기존의 DAB 컨버터에서 주로 사용되는 고주파 변압기는 Core-type 또는 shell-type으로 만들어지며, 1차 측 권선과 2차 측 권선이 자기적으로 강하게 결합되어 높은 전력 전달 효율을 가지도록 만든다. 이런 DAB 컨버터를 직/병렬 연결해 MV-DC to LV-DC로 변환하는 반도체 변압기 등을 구성할 때, 1차 측 권선과 2차 측 권선 사이에는 절연 문제와 1차 측 스위치 회로와 2차 측 스위치 회로, 그리고 고주파 변압기가 각각 따로 절연해야 하는 문제점이 있다. 본 논문에서 제안하는 DAB 컨버터는 1차 측과 2차 측이 수 cm 이격되어 있어 1차 측과 2차 측 사이의 자기적 결합이 굉장히 약하다. 따라서 1차 측과 2차 측 코일을 커패시터로 공진시켜 전력을 전달하는 무선전력전송(Loosely Coupled Inductive Wireless Power Transfer)을 이용한다. 무선전력전송의 공진 topology는 Parallel-Series로 선택했고, impedance transformation 회로를 추가했다.

• PNF and Movement
• /
• v.11 no.2
• /
• pp.77-85
• /
• 2013

Purpose : The purpose of this study is to investigate the effects school business hospital-based integrated health education on learning transfer factor and level. Methods : This study conducted a questionnaire survey of 60 students at D college using metastatic diagnostic tool who took the integrated health education curriculum, statistical analysis utilized the SPSS 17.0 for window version. Results : On comparison of the details 5 clauses, 29 questions using LTSI, this study found that the integrated health education based on the school business hospital is effective for learning transfer. Conclusion : What the integrated health education based on clinic practice system at D college to overcome the limitations of health and medical line is effective for learning transfer and it will be useful to cultivate professional.

• PNF and Movement
• /
• v.10 no.3
• /
• pp.53-66
• /
• 2012

Purpose : This research has been studied physical therapy curriculum according to the demands of the medical institution. Methods : The subjects of this study were 88 physical therapists. The subjects were divided by OS(n=41) and NS(n=47) group. The results of research were analyzed using independent t-test with average and standard deviations as the statistical methods for data analysis. Results : the results of the study were as follow : First, it was needed on the development planning for physical therapy curriculum according to the demands of the medical institution. Second, tests of independent t-test were a statistically significant difference between OS and NS group on the demands of the medical institution. Third, it was needed that time tables on physical therapy curriculum were partially regulated by the demands of the medical institution. Conclusion : We suggest to change the curriculum of physical therapy. It is more accurately reflected the rigor of the high-quality education preparation needed for current and future practice.