• Journal of Korean Neurosurgical Society
• /
• v.30 no.9
• /
• pp.1065-1071
• /
• 2001

Object : This study was conducted to evaluate whether short-term intravenous infusion of tranexamic acid (AMCA) was able to improve the management outcome by preventing rebleeding without increasing vasospasm and hydrocephalus associated with the long-term administration of this agent in the patients with aneurysmal subarachnoid hemorrhage(SAH) who were planned for the early surgery. Methods : During the period from June, 1996 to May, 1998, 137 patients admitted within 3 days of their SAH and planned for early surgical intervention were subject to study population. Of these, 60 patients who had been treated with AMCA were classified as AMCA treated group and 77 patients without AMCA treatment as AMCA untreated group. Initially, prognostic factors for rebleeding, vasospasm, hydrocephalus and outcome following SAH including age, sex, clinical grade, CT grade, site of ruptured aneurysms, admission day after SAH, surgery day after SAH, number of aneurysms and hypertension history, were analyzed and compared between AMCA treated group and untreated group. Secondly, the incidence of rebleeding, symptomatic vasospasm and hydrocephalus were compared between the two groups. Also, the management outcome of the patients was compared between the two groups. Results : There were no significant differences in prognostic factors between the two groups. The rebleeding rate was 0% in the AMCA treated group whereas the rate was 7.8% in the untreated group. This difference was statistically significant. The incidences of symptomatic vasospasm and hydrocephalus were found not to be significantly different between the two groups. Of the treated group, 31.7% of patients developed hydrocephalus compared to 32.5% of those at the untreated group. Fourteen(23.3%) patients in treated group developed symptomatic vasospasm and 6 of them(10%) suffered stroke whereas incidences of these in untreated group were 25.9% and 11.7%, respectively. The AMCA treated group showed more favorable outcome than that of untreated group. There was no case of death by rebleeding in the AMCA treated group while one of the main causes of death in the untreated group was rebleeding. Conclusion : Short-term high-dose AMCA administration is considered beneficial in improving outcome and diminishing the risk of rebleeding in the patients who suffer from an aneurysmal SAH prior to early surgical intervention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.187-195
• /
• 2017

TheraCal LC, a new light-cured, resin-modified calcium silicate-filled base/liner material, has been introduced as a pulpotomy agent. The aim of this study was to evaluate the capacity of hard tissue formation and pulpal response after pulpotomy with TheraCal LC. Twenty-two 9-week-old male rats were anesthetized, cavities were prepared in maxillary first molars and pulps were capped with formocresol (FC), mineral trioxide aggregate (MTA), and TheraCal LC. Specimens obtained from rats were scanned using a high-resolution micro CT system. The specimens were prepared and evaluated histologically, and immunofluorescence assay was performed to assess the dentin matrix protein-1 (DMP-1) expression. On micro CT analysis, the MTA and TheraCal LC groups showed thicker hard tissue formation than the FC group. On hematoxylin and eosin (H&E) staining, MTA and TheraCal LC groups showed dentine bridge formation with vital pulp beneath the materials. On immunofluorescence analysis, DMP-1 was highly expressed in the TheraCal LC group compared to the FC group. TheraCal LC showed similar capacity to form hard tissue as MTA when it was used as a pulpotomy agent. Because of its good manipulation and faster setting time compared to MTA, TheraCal LC could be considered as a good alternative to MTA.

• Journal of Society of Preventive Korean Medicine
• /
• v.9 no.2
• /
• pp.59-75
• /
• 2005

The experiments were undertaken to evaluate the effects of Bosaengtang in pregnant rats and fetuses. Female Sprague-Dawley rats were orally administered with Bosaengtang at the dose of 5mg/kg/day for 20 days. Pregnant rats were sacrificed at the 20th day of gestation, and observed internal and reproductive organs. Fetuses were randomly selected and fixed in 95% ethanol. Fetuses were stained with alcian blue and alizarin red S, and observed skeletal malformations. The results obtained were as follows : Bosaengtang administered group showed higher maternal body weight than the control group, but both groups showed increase in weight. Bosaengtang administered group showed lower than the control group, and higher liver and kidney weight than the control group, but the differences were minimal. There were no significant changes between the control and treated group in blood chemistry values and hematological values but all the groups were within in normal ranges. There were no significant changes in the number of corpus luteum, implantation, live fetus and implantation rate, delivery rate, late resorption rate, sex ratio, but Bosaengtang administered group showed higher early resorption rate than control group. comparing the control and Bosaengtang group, neonatal body weight and the number of fetuses were increased in Bosaengtang group. The fetuses of dams treated with Oriental medicine didn't showed external malformation. Vertebral and sternal variations were observed in Bosaengtang group, but the differences were not apparent compared to the control group. The number of ribs, cervical, thoracic and lumbar vertebrae were normal. The number of sacral was similar and the number of caudal was increased. Fetuses showed significant difference in the number of caudal vertebrae. (P<0.01) From these results, we can carefully conclude that Bosaengtang showed beneficial effects on maternal body weight, early resorption rate, number of live fetus. There were no significant changes in organ weight, hematoscopy, reproduction organs. External malformation wasn't visible. Skeletal variations were showed in vertebrae and sternum but compared to the control group, these variations weren't much different.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.2
• /
• pp.19-32
• /
• 2014

Carbonate sand of Sabkha layer in the middle east was made of deposition of shell fragments and it consisted of porous particles containing inner void. Generally, at yield stress the soil structure begins to break down, so the porewater pressure and the settlement are increased rapidly. In carbonate sand, unlike quartz sand if particle crushing happens, the inner voids are exposed and porewater pressure can be decreased under yield stress. Porewater pressure can be determined as the sum of excess porewater pressure due to increase of relative density, inner void expose of particle under particle crushing stress and rearrangement of crushed particle fragments. The porewater pressure can be negative value in case of greater amount of inner void expose, so if particle crushing is bigger, the porewater pressure value is smaller. The negative value zone of porewater pressure from triaxial test result means particle crushing effect is bigger than outer void decrease effect and the particle crushing effect dominant zone size was 1.50∼3.46% from triaxial test result of Sabkha layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.364-364
• /
• 2013

현재 투명전극은 주로 ITO를 사용하고 있으며, ITO는 인듐산화물(In2O3)과 주석산화물(SnO2)이 9대 1의 비율로 혼합된 화합물로 인듐이 주성분이다. 따라서 ITO 사용량의 증가는 인듐의 수요 증가를 이끌어 2003년 이후 인듐 잉곳의 가격이 급등하였다. LCD에 응용되는 금속재료의 가격추이를 비교해보면, 인듐이 가장 큰 변화를 보이고 있으며, 2005년 인듐 가격은 2002년 대비 1,000% 이상 상승하였다가 2007년 이후 500%p 하락하여 2008년 2월 22일 기준으로 톤당 49만 달러에 거래되고 있다. 같은 기간 동안 알루미늄의 가격은 76.6% 상승하였으며 구리는 394%, 주석은 331% 상승하였다. 이러한 인듐의 가격 상승폭은 동일한 기간 동안 다른 금속 재료와 비해 매우 크며, 단위 질량당 가격도 20배 이상 높은 수준이다. ITO의 주성분인 인듐의 이러한 가격의 급등 및 향후 인듐의 Shortage 예상으로 인해 ITO 대체재 확보의 필요성이 증가되고 있다. 태양광 발전산업에서 현재 주류인 결정질 실리콘 태양전지의 변환효율은 꾸준히 향상되고 있으나, 태양전지의 가격이 매년 서서히 하강되고 있는 실정에서 결정질 실리콘 가격의 상승 등으로 고부가 가치 산업유지에 어려움이 있으며, 생산 원가를 낮출 수 있는 태양전지 제조기술로는 2세대 태양전지로 불리는 박막형이 현재의 대안으로 자리매김하고 있으며, 박막태양전지 산업분야가 현재의 정부정책 지원 없이 자생력을 갖추고 또한 시장 경쟁력을 확보하기 위해서는 박막태양전지 개발과 더불어 저가의 재료개발도 시급한 상황이다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 소다라임 유리기판 위에 박막태양전지용 투명전도성 ZnO(Al) 박막 및 ZnO(AlGa) 박막을 각각 제작하였다. 각각 박막의 표면특성 및 성장구조, 결정성을 조사하였고, 또한 전기적 특성, 홀이동도와 개리어농도, 박막의 두께, 광투과율 특성을 연구하였다. ZnO(Al)박막, ZnO(AlGa)박막 대한 각각 특성을 평가하고 그 결과들을 논하고자 한다.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.431-442
• /
• 2017

The purpose of this study is to reveal that coloring status and the degree of damage and the kinds of pigments used in large buddhist painting (Gwaebultaeng) of Tongdosa temple using a scientific analysis methods. It was observed that the physical damage patterns of the Gwaebultaeng were folding, lifting, fading, and peeling. Lead red, cinnabar and organic pigments were used as red pigments. Malachite and atacamite were used as green pigments, azulite and lazulite were blue pigments, lead white and talc were white pigment. It is estimated that overlapping organic pigments on the lead white were used as the yellow pigment and carbon was the black pigment. Through the analysis of the particle status of the pigments, it was confirmed that different types of raw materials were used for the green pigment, and the crystal form was easily distinguishable. Also, the dark blue color and the light blue color differed from each other depending on the size and shape of the raw material particles. Yellow and purple colors were organic pigments which did not have a graininess. The yellow and purple colors were organic pigments free from the graininess, and the pigments of dark red pigments was found to be mixed with the orange color pigments and carbon particles.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2020

The purpose of this study was to find out the correlation through comparative analysis of used materials and manufacturing techniques such as firing characteristics for sherds excavated from celadon kiln site in Punggil-ri, Jangheung. The color difference of the sherds was very wide, and even in the microstructure of the cross section of the glaze layer and the body layer, the celadons, whitewares, blackware, and stonewares could not be characterized because they did not show distinct differences from each other. As a result of estimating the firing temperature through the analysis of constituent minerals and thermal analysis, most of them were estimated to have been fired at 1000℃, but some were fired at high temperatures above 1200℃. It was difficult to clearly distinguish between celadon and whiteware even in the major compositional content of bodies. In the statistical analysis, glaze could be classified three group according to the type of sherds, but the bodies of celadons, whitewares, and blackware classified into one similar group. It is considered that it is not more likely differences in raw materials but some ingredients were removed or added during the purification process. Conclusionally, in this kiln site was found through scientific analysis that there were technical attempts to produce various ceramics, and that the manufacturing techniques and materials of ceramics were in an early stage that was not stabilized.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.499-506
• /
• 2015

The artifacts of Admiral Yi Sun-sin (Treasure No.326) consist of six items with two long swords, a jade decoration, a belt and two peach-shaped cups. In commemoration of the opening of Chungmugong Yi sun-sin Memorial Museum (April 28, 2011), there were conservation treatments for those artifacts at the beginning of 2011. At that time, from the result of non-destructive surface analysis on pigments in blood-colored grooves of the two long swords, it was presumed to be synthetic resin paints. This study shows the accurate identification on pigments which was presumed as synthetic resin paints and its removal. To identify pigments in blood-colored grooves, the optical microscope, scanning electron microscope, Micro-XRF, XRD and FT-IR were used for the analysis. The results turned out that the thickness of $10{\sim}90{\mu}m$ in a single layer was measured. And major components containing Pb and Cr and lead chromium molybdenum oxide were identified and to identify components of adhesives from the analysis by FT-IR, it turned out to be alkyd resin, which can be presumed that they were recently colored with synthetic paints. The synthetic paints easily react with most of the organic solvents. And it is so easy to handle without the effect on metal that it was removed with acetone. While removing synthetic paints, all of paints on it were collected for identifying whether there is traditional pigment but nothing was identified.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.15-20
• /
• 2007

Growth kinetics of intermetallic compound (IMC) at various interface in Cu pillar bump during aging have been studied by thermal aging at 120, 150 and $165^{\circ}C$ for 300h. In result, $Cu_6Sn_5\;and\;Cu_3Sn$ were observed in the Cu pillar/SnPb interface and IMC growth followed parabolic law with increasing aging temperatures and time. Also, growth kinetics of IMC layer was faster for higher aging temperature with time. Kirkendall void formed at interface between Cu pillar and $Cu_3Sn$ as well as within the $Cu_3Sn$ layer and propagated with increasing time. $(Cu,Ni)_6Sn_5$ formed at interface between SnPb and Ni(P) after reflow and thickness change of $(Cu,Ni)_6Sn_5$ didn't observe with aging time. The apparent activation energies for growth of total $(Cu_6Sn_5+Cu_3Sn),\;Cu_6Sn_5\;and\;Cu_3Sn$ intermetallics from measurement of the IMC thickness with thermal aging temperature and time were 1.53, 1.84 and 0.81 eV, respectively.