• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.595-605
• /
• 1994

The field observations. data analyses and numerical experiments are performed to investigate the short and long term beach deformation mechanisms in Haeundae beach. The schematic diagrams of deposition and erosion mechanism due to the attack of typhoons are described from the analysis on the beach widths and profiles. The short term beach deformation depends strongly on the characteristics of incident waves and wave-induced currents. The main incident wave and the calibration parameters of the shoreline change model are determined using the beach width data. Beacause the main incident wave approaches obliquly from the SE direction, the net westward longshore sediment transport occurs. Therefore the unbalance of longshore sediment budget in the east of the beach where the sediment source dose not exist causes a beach erosion. On the other hand, the deposited sand in the west is lost offshore by the storm wave action.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.176-185
• /
• 2003

In order to ensure that submarine pipelines are stable and functional during their project lives, attention must be paid to possibility of their local scouring. When a pipeline is placed on an erodible bed, scour will develop and cause the spanning of the pipeline. U they were destroyed partially or fully, it might cause enormous restoration expenses and contamination of sea water. This paper aims at examining the characteristics of the scour End the prediction of the local scour depths around the submarine pipelines. The pipelines on the model beach with the uniform slope are placed, and the local scour depths around the pipelines are obtained according to the various wave steepnesses. Using the experimental results, some parameters needed for analyses are calculated. Finally, empirical equations of the scour depth around the pipelines are suggested through the correlation analyses between the rotative scour depth. the KC number and Modified Ursell number.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.5
• /
• pp.3-13
• /
• 2005

The present study examined the 3 dimensional space distribution characteristics of sea water intrusion using data available from previous observations. For this study, we used 3D FEMWATER, which is a 3 dimensional finite element model. The target area was around Daechang-ri, Gimje-si, Jeollabuk-do. The area is relatively easy to formulate a conceptual model and has observation wells in operation for surveying sea water intrusion. Considering the uncertainty of numerical simulation, we analyzed sensitivity to hydraulic conductivity, which has a relatively higher effect. According to the result of the analysis, the variation of TDS concentration had an error range of $-1,336{\~}+107 mg/{\iota}$. Taking note that the survey data from observation wells were collected when the boundary between fresh water and sea water in the aquifer was in equilibrium, we set the range of time for numerical simulation and estimated the spatial distribution of TDS concentration as the range of sea water intrusion. According to the result of estimation, the spatial distribution of TDS concentration calculated when 1,440 days were simulated was taken as the range of sea water intrusion. Using the result of calculation, we can draw not only vertical views for a certain section but also horizontal views of different depth. These views will be greatly helpful in understanding the spatial distribution of the range of sea water intrusion. In addition, the result of this study can be used rationally in proposing an optimal quantity of water pumping through investigating the moving route of sea water intrusion over time in order to prevent excessive water pumping and to maintain an optimal number of water pumping wells per interval.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2017

We performed seismic imaging based on relative S-wave travel times to examine S-wave velocity of upper mantle structure beneath East Asia. We used teleseismic events recorded at 129 broadband stations of the Korea Institute of Geoscience and Mineral Resources (KIGAM), Korea Meteorological Administration (KMA), and National Research Institute for Earth Science and Disaster Prevention (NIED). Relative travel time residuals were obtained by a multi-channel cross-correlation method designed to automatically determine accurate relative phase arrival times. The resulting images show high-velocity anomalies along plate boundaries around the Japanese islands region. These anomalies may indicate subducting Pacific and Philippine Sea plates. On the other hand, a low-velocity anomaly is revealed beneath east of the Korean peninsula down to around 300 km depth, which is thought to be related to the formation of the Ulleung basin and the Ulleung island. Low-velocity anomalies revealed beneath the Jeju island may imply that the formation and volcanism of the Jeju island have been caused by magmatic sources from the deep mantle.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.505-521
• /
• 2007

This study estimated response of water duality and pollutant behavior according to the discharge and reuse of treated wastewater by three-dimensional eco-hydrodynamic model, and suggest plan that water quality management and environmental restoration in the coastal area including urban stream of Yeosu, Korea. Dispersions of low-saline water and COD by treated wastewater loads (design facility capacity, about $110,000m^3/d$) were very limited in near of effluent site. Nutrients, however, increase compared to the other water quality factors, especially total nitrogen was very sensitive to input loads. When reuse some of treated wastewater to Yeondeung stream, nitrogen was big influence on estuarine water quality. Although current characteristics of treated wastewater such as discharge and water quality were negligible to the change of marine environment, effluent concentration of COD, TN and TP, especially 40% of TN, are reduced within the allowable pollutant loads for satisfy environmental capacity and recommended water duality criteria. Also, controls of input point/non-point sources to Yeondeung stream and base concentration of pollutants in coastal sea itself are very necessary.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.4
• /
• pp.113-124
• /
• 2007

The virtual laboratory is implemented by Java applets and FLASH animations, which provides the learners with improved experimental methods. If the learners have access to the virtual laboratory system through signing up procedure, they can acquire the fundamental concepts and make a virtual experiment on 8051 microcontroller. In addition, we have implemented the remote laboratory for practicing 8051 microcontroller, which can be used to compensate the absence of reality, occurred during virtual laboratory session. Finally, the proposed integration laboratory provides the learners with almost all the same and advantages as a real laboratory environment.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.7-12
• /
• 2008

This study aims to extract the factors which constitute use tendency on digital product, and to devide korean generation. We surveyed to digital product users who are 15 through 49 years old, executed factor analysis, cluster analysis, and so on, The results of factor analysis, we selected 11 factors, named as interest, entertainment, simplicity, anxiety of mal-operation, practicality, personality, consistency, multi-functionality, learning style of how-to-use, responsibility of disorder, and lending degree. The results of cluster analysis, we classified subjects into following three types: positive acceptor, passive follower, and conservative indifference. And, we executed frequency analysis iteratively. We devide korean digital product users to 4 generations -1727G, 2834G, 3538G, 3949G- by means of synthesizing the results. It can be said that generation is strong factor effect to use tendency, but the other factors like sex, occupation, school career, income become weak factor or not matters. Finally, we considered the reason, 3538G takes a crossing point role through comparison the generation division with cohort research on product use experience.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.42-46
• /
• 1998

Miniaturized specimen technology Permits mechanical behavior to be determined using a minimum volume of material. The technology is useful in case of not collecting a large amount of materials from industrial equipments. Five kinds of accelerated degradation materials were prepared by isothermal aging heat treatment at $630^{\circ}C$. Three kinds of specimens were prepared for impact testing. In order to increase plastic constraint of subsize specimen, side-groove was introduced. Results between subsize and full size impact testing were compared. Size effects correlations were developed for the impact properties of turbine rotor material. These correlations successfully predict the ductile brittle transition temperature (DBTT) of full size Charpy impact specimens based on subsize specimen data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.3 no.1
• /
• pp.18-23
• /
• 1966

An experimental study of a steel plate thickness gauge by means of the measurements of backscatered gamma-rays has been carried out. The difference between this and other methods is that this method does not include any shilding matterials in the detecting probe, because the primary radiations and the backscattered radiations are detected simultaneously by an NaI (TI) scintillating crystal, and the activity of the Co-60 source used is low enough. In this thickness gauge, the thickness of the steel plates can be read directly on the counting ratemeter scale. The optimum conditions in the source-to-detector distance, window width of the analyzer, energy and strength of the gamma-ray source were found experimentally. The results have shown that the accuracy of the gauge was about $\pm$3% in the range of 3 to 8mm thickness. This gauge can be used to detect the pits or corrosions on the inner walls of the steel pipes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.69-74
• /
• 2016

A technique for improving estimation accuracy is introduced in order to locate the impact position of artillery shell during the weapon scoring test. Study on localization of impacts using acoustic measurement has been conducted and the usability of sensor array is verified with experiments. When the blast occurs above the ground in the firing range, the acoustic sensor above the ground can measure the directly propagated sound with the ground-reflected one. In this study, a method for reducing estimation error by using the reflection signal measurements based on the time difference of arrival method. Considering the reflection sound works as same as placing a virtual sensor symmetrically through the ground. This idea enables a virtual three-dimensional array configuration with a two-dimensional plane array above the ground as such. The time difference between the direct and the reflected propagations can be estimated using cepstrum analysis. Performance test has been made in the simulation experiment in the football size area.