• Title/Summary/Keyword: 이용기반

Search Result 45,812, Processing Time 0.071 seconds

Dynamics of Inorganic Nutrients and Phytoplankton in Shihwa Reservoir (시화호에서 무기영양염과 식물플랑크톤의 동태)

  • Kim, Dong-Sup;Cho, Kyung-Je;Shin, Jae-Ki
    • Korean Journal of Ecology and Environment
    • /
    • v.33 no.2 s.90
    • /
    • pp.109-118
    • /
    • 2000
  • The dynamics of inorganic nutrients and phytoplankton population were examined at eight stations of Shihwa Reservoir, which situated near the cities newly constructed and the industrial complex of West-sea in Korea, from January to December 1999. Among environmental factors, average concentration of $NH_4$, SRP and SRSi were $522.7\;{\mu}g\;N/l$, $9.8\;{\mu}g\;N/l$ and $0.26\;{\mu}g\;Si/l$, respectively. Water quality was extremely deteriorated by a great amount of pollutants load into inner reservoir after the event of rainfall. Nutrients concentration was suddenly decreased toward the lower part. While $NO_3$ concentration did not much varied among stations, but it was relatively high in winter season. Chlorophyll-a concentration was high at the upper part of the reservoir, with average of $37.2\;{\mu}/l$, and closely related to the fluctuation of $NH_4$, SRP and SRSi concentrations. The phytoplankton development in the water column was dominated by diatom (autumn), prasinoid (winter) and dinoflagellate (summer). Dominant phytoplankton were composed to Skeletonema costatum of diatom, Prorocentrum minimum of dinoflagellate, Chroomonas spp. of cryptomonad, Eutreptiella gymnastica of euglenoid and Pyramimonas spp. of prasinoid. The large bloom of phytoplankton at the upper zone of the Shihwa Reservoir after inflow of a seawater were consistently observed. In consequence, water quality management of the inlet stream was assessed to be very important and urgent.

  • PDF

Numerical analysis of FEBEX at Grimsel Test Site in Switzerland (스위스 Grimsel Test Site에서 수행된 FEBEX 현장시험에 대한 수치해석적 연구)

  • Lee, Changsoo;Lee, Jaewon;Kim, Geon-Young
    • Tunnel and Underground Space
    • /
    • v.30 no.4
    • /
    • pp.359-381
    • /
    • 2020
  • Within the framework of DECOVALEX-2019 Task D, full-scale engineered barriers experiment (FEBEX) at Grimsel Test Site was numerically simulated to investigate an applicability of implemented Barcelona basic model (BBM) into TOUGH2-MP/FLAC3D simulator, which was developed for the prediction of the coupled thermo-hydro-mechanical behavior of bentonite buffer. And the calculated heater power, temperature, relative humidity, total stress, saturation, water content and dry density were compared with in situ data monitored in the various sections. In general, the calculated heater power and temperature provided a fairly good agreement with experimental observations, however, the difference between power of heater #1 and that of heater #2 could not captured in the numerical analysis. It is necessary to consider lamprophyre with low thermal conductivity around heater #1 and non-simplified installation progresses of bentonite blocks in the tunnel for better modeling results. The evolutions and distributions of relative humidity were well reproduced, but hydraulic model needs to be modified because the re-saturation process was relatively fast near the heaters. In case of stress evolutions due to the thermal and hydraulic expansions, the computed stress was in good agreement with the data. But, the stress is slightly higher than the measured in situ data at the early stage of the operation, because gap between rock mass and bentonite blocks have not been considered in the numerical simulations. The calculated distribution of saturation, water content, and dry density along the radial distance showed good agreement with the observations after the first and final dismantling. The calculated dry density near the center of the FEBEX tunnel and heaters were overestimated compared with the observations. As a result, the saturation and water content were underestimated with the measurements. Therefore, numerical model of permeability is needed to modify for the production of better numerical results. It will be possible to produce the better analysis results and more realistically predict the coupled THM behavior in the bentonite blocks by performing the additional studies and modifying the numerical model based on the results of this study.

Origin of Sandstone Fragments Within Core Sediments Obtained from Southwestern Continental Shelf of the Ulleung Basin, East Sea (동해 울릉분지 남서부 대륙붕에서 채취된 시추퇴적물내 사암편의 기원)

  • Lee, Eui-Hyeong;Lee, Yong-Kuk;Shin, Dong-Hyeok;Huh, Sik;Kim, Seong-Ryul;Jeong, Baek-Hoon;Han, Sang-Joon;Chun, Jong-Hwa
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.6 no.3
    • /
    • pp.126-134
    • /
    • 2001
  • Several angular sandstone fragments (about 7 cm in longest diameter) occur in two piston cores, obtained from the submarine trough in the northeastern part of Korea Strait. The origin of the sandstone fragments and the paleoenvironment of trough sediment could be suggested from sedimentary facies analysis of cores and identification of ostracod within sandstone fragments. Echo characteristics around two core sites in submarine trough represent the prolonged bottom echoes with diffuse or no subbottom reflectors. The cores consist of a lower bioturbated mud and an upper gravelly sand sediments with sandstone/shell fragments. The bioturbated mud sediments show low water contents (27-44%) and high shear strength (19.2->37 kPa) compared with those of Holocene sediments (60-219% and 1.0-2.7 kPa, respectively) in the inner shelf and continental slope. However, clay contents (48-56%) of the bioturbated mud sediments are similar to those of fluviatile Holocene sediments in the inner shelf. The mean grain size of gravelly sand sediments ranges from 2.3 to 3.0 ${\phi}$ and shows coarsening upward with sandstone/shell fragments. The Holocene palimpsest in the continental shelf are composed of muddy sand sediments or sandy mud sediments (mean grain size: 4.6-7.6 ${\phi}$). Those suggest that two core sediments might be formed from Paleofluvial and paleocoastal deposits during sea-level lowstand. However, sandstone fragments mainly consist of quartz grains and bioclasts, with carbonate matrix, hollow pore, and glauconite. Two extinct ostracod species, Normanicythere sp. and Kotoracythere sp., are recovered in the sand-stone fragments of core EP-7, and they continued to exist from late Pliocene to early Pleistocene in cold water environment of this area. Thus, the sandstone fragments are interpreted to be formed at the paleocoastal environment derived from the Plio-Pleistocene outcrops exposed around the submarine trough during the LGM (Last Glacial Maximum) period.

  • PDF

Environmentally Associated Spatial Distribution of a Macrozoobenthic Community in the Continental Shelf off the Southern Area of the East Sea, Korea (한국 동해 남부해역 대륙붕에 서식하는 대형저서동물군집 공간분포를 결정하는 환경요인)

  • Lee, Jung-Ho;Lee, Jung-Suk;Park, Young-Gyu;Kang, Seong-Gil;Choi, Tae Seob;Gim, Byeong-Mo;Ryu, Jongseong
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.19 no.1
    • /
    • pp.66-75
    • /
    • 2014
  • This study aims to understand environmental factors that determine spatial distribution of macrozoobenthic community in the southern area (ca 100-500 m depth) of East Sea, Korea, known as a candidate site for carbon storage under the seabed. From sixteen locations sampled in the summer of 2012, a total of 158 species were identified, showing density of $843indiv/m^2$ and biomass of $26.2g\;WW/m^2$, with increasing faunal density towards biologically higher diverse locations. Principal component analysis showed that a total of 33 environmental parameters were reduced to three principal components (PC), indicating sediment, bottom water, and depth, respectively. As sand content was increasing, number of species increased but biomass decreased. Six dominant species including two bivalve species favored high concentrations of ${\Omega}$ aragonite and ${\Omega}$ calcite, indicating that the corresponding species can be severely damaged by ocean acidification or $CO_2$ effluent. Cluaster analysis based on more than 1% density dominant species classified the entire study area into four faunal assemblage (location groups), which were delineated by characteristic species, including (A) Ampelisca miharaensis, (B) Edwardsioides japonica, (C) Maldane cristata, (D) Spiophanes kroeyeri, and clearly separated in terms of geography, bottom water and sediment environment. Overall, a discriminant function model was developed to predict four faunal assemblages from five simply-measured environmental variables (depth, sand content in sediment, temperature, salinity and pH in bottom water) with 100% accuracy, implying that benthic faunal assemablages are closed linked to certain combinations of abiotic factors.

Clinical Outcomes of Thoracic Sympathicotomy for Palmar Hyperhidrosis (수부 다한증에서 흉부교감신경 절제술의 성적)

  • Lee, Jang-Hoon;Lee, Jung-Cheul
    • Journal of Chest Surgery
    • /
    • v.41 no.1
    • /
    • pp.89-94
    • /
    • 2008
  • Background: Thoracoscopic R3 sympathicotomy can effectively treat palmar hyperhidrosis. Here, we evaluated post-operative outcomes of patients receiving a thoracoscopic R3 sympathicotomy due to palmar hyperhidrosis. Material and Method: From January 2001 to December 2006, 225 patients were treated with a R3 sympathicotomy, and follow up was completed for 200 patients, with an average follow up period of 51.7 ($11{\sim}80$) months. We measured postoperative hand sweating according to four grades; dry (grade 1), proper (grade 2), light sweating (grade 3), heavy sweating (grade 4) and evaluated patient satisfaction using 4 grades: very good (grade 0), good (grade1), regular (grade 2), and deficient (grade 3). Result: There were no differences in clinical parameters between the compensatory sweating group and the non-compensatory sweating group. There was a 83.5% compensatory sweating rate. The degree of compensatory sweating related to the patient's body mass index and was influenced by the season, environmental temperature, and emotional stress. Conclusion: The satisfaction rate was 61.5%, and the degree of satisfaction related to the development of compensatory sweating. Therefore, reducing compensatory sweating would increase patient satisfaction with R3 sympathicotomies.

Evaluation of Heavy Metal Contamination in Streams within Samsanjeil and Sambong Cu Mining Area (삼산제일.삼봉 동광산 주변 수계의 중금속 오염도 평가)

  • Kim, Soon-Oh;Jung, Young-Il;Cho, Hyen-Goo
    • Journal of the Mineralogical Society of Korea
    • /
    • v.19 no.3 s.49
    • /
    • pp.171-187
    • /
    • 2006
  • The status of heavy metal contamination was investigated using chemical analyses of stream waters and sediments obtained from Samsanjeil and Sambong Cu mining area in Goseong-gun, Gyeongsangnam-do. In addition, the degree and the environmental risk of heavy metal contamination in stream sediments was assessed through pollution index (Pl) and danger index (DI) based on total digestion by aqua regia and fractionation of heavy metal contaminants by sequential extraction, respectively. Not only the degree of heavy metal contamination was significantly higher in Samsanjeil area than in Sambong area, but its environmental risk was also revealed much more serious in Samsanjeil area than in Sambong area. The differences in status and level of contamination and environmental risk between both two mining areas may be attributed to existence of contamination source and geology. Acid mine drainage is continuously discharged and flows into the stream in Samsanjeil mining area, and it makes the heavy metal contamination in the stream more deteriorated than in Sambong mining area in which acid mine drainage is not produced. In addition, the geology of Samsanjeil mining area is mainly comprised of andesitic rocks including a small amount of calcite and having lower pH buffering capacity fer acid mine drainage, and it is likely that the heavy metal contamination cannot be naturally attenuated in streams. On the contrary, the main geology of Sambong mining area consists of pyroclastic sedimentary Goseong formation containing a high content of carbonates, particularly calcite, and it seems that these carbonates of high pH buffering capacity prevent the heavy metal contamination from proceeding downstream in stream within that area.

The PRISM-based Rainfall Mapping at an Enhanced Grid Cell Resolution in Complex Terrain (복잡지형 고해상도 격자망에서의 PRISM 기반 강수추정법)

  • Chung, U-Ran;Yun, Kyung-Dahm;Cho, Kyung-Sook;Yi, Jae-Hyun;Yun, Jin-I.
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.11 no.2
    • /
    • pp.72-78
    • /
    • 2009
  • The demand for rainfall data in gridded digital formats has increased in recent years due to the close linkage between hydrological models and decision support systems using the geographic information system. One of the most widely used tools for digital rainfall mapping is the PRISM (parameter-elevation regressions on independent slopes model) which uses point data (rain gauge stations), a digital elevation model (DEM), and other spatial datasets to generate repeatable estimates of monthly and annual precipitation. In the PRISM, rain gauge stations are assigned with weights that account for other climatically important factors besides elevation, and aspects and the topographic exposure are simulated by dividing the terrain into topographic facets. The size of facet or grid cell resolution is determined by the density of rain gauge stations and a $5{\times}5km$ grid cell is considered as the lowest limit under the situation in Korea. The PRISM algorithms using a 270m DEM for South Korea were implemented in a script language environment (Python) and relevant weights for each 270m grid cell were derived from the monthly data from 432 official rain gauge stations. Weighted monthly precipitation data from at least 5 nearby stations for each grid cell were regressed to the elevation and the selected linear regression equations with the 270m DEM were used to generate a digital precipitation map of South Korea at 270m resolution. Among 1.25 million grid cells, precipitation estimates at 166 cells, where the measurements were made by the Korea Water Corporation rain gauge network, were extracted and the monthly estimation errors were evaluated. An average of 10% reduction in the root mean square error (RMSE) was found for any months with more than 100mm monthly precipitation compared to the RMSE associated with the original 5km PRISM estimates. This modified PRISM may be used for rainfall mapping in rainy season (May to September) at much higher spatial resolution than the original PRISM without losing the data accuracy.

기호학적 분석을 통한 영상애니메이션 연구

  • Lee Jong-Han
    • Broadcasting and Media Magazine
    • /
    • v.10 no.1
    • /
    • pp.85-98
    • /
    • 2005
  • About the phenomenon of being imaged of everything, the scholars of the humanities who had studied on the simple reason structure in a text have been in a big agony how accept it. Especially, semiologists have studied about this for a long time and the points at issues of Saussure, Peirce as well as Umbeto Eco are more outstanding. Being based upon his philosophic interesting from medieval esthetics to modern semiotics, Eco was very concerned about the field of general esthetics and poputar arts like television and cartoons. He connected the mutual open-relations between 'signifier' and 'signified' debated in Semiotics with the open and vague modern arts and regarding it as a deviation from the custom, intensively studied the film-media. Saussure is a representative figure of semiotics and explained Sign and the character of semiotics as the division into two parts such as signifier/ signified, form/ substance, langue/ parole, synchrony/ diachrony. The triadic semiotics (the theory that Sign is composed of the triadic structure like sign, referent and interpretant) of Peirce put the new item- 'interpretant' in sign and referent to connect them and open the possibility to introduce time in to the Sign. In this paper, I try to analyze a cartoon film in the semiotic structure with the systemic, reasonable and logical approach and analysis as as possible. While the images shown through a film were depended on the romantic and impressional judge in the past, due to semiotics, it' s quite possible to correlate the procedure of symbolization to social coherence so that we analyze the incredible power of images to suck audiences with the systemetic Sign. I accept all ot film-images including a cartoon film as not the simple esthetic arts but a social custom and system, want to serve as a aid to properly understand world and humanbeings and prevent the film-image from being mystic. A cartoon and a cartoon film which were begun with the link of a text and an illustration give shape to all of images such as materials, places and even thoughts with a cartoon icon existed in only a cartoon. A cartoon and a cartoon film simply and exquistely conceptualize the complex and vague attribute of an organic creature and extend them infinetly beyond language. However, it can be exploited as a mysticism to temptate the general public and a faking material. In addition to that, it can distort our world-knowledge engaging a political power and the massive power of mass media. In this paper, being based on semiotics to approach a cartoon film in a scientific and organic system, I conclude that a non-linguistic cartoon expression is entangled with the manifold signs and implies the supplementary meanings just like a regular linguistic expression. It remarks that the iconic images of a cartoon film are composed of the social codes and can be analyzed on grounds of a linguistic system.

Diversity in Lipid Contents and Fatty Acid Composition of Soybean Seeds Cultivated in Korea (국내 유통 콩의 지방함량 및 지방산 조성변이)

  • Kim, Sun-Lim;Lee, Yeong-Ho;Chi, Hee-Youn;Lee, Sun-Joo;Kim, Si-Ju
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.52 no.3
    • /
    • pp.348-357
    • /
    • 2007
  • The 117 soybeans seeds were collected from the nine provinces of Korea, and protein and lipid contents, and fatty acid composition levels were evaluated to investigate their relationship. The 100-seed weights of the black soybeans were varied $27.7{\sim}33.1g$, while the 100-seed weight of yellow soybeans were varied $24.6{\sim}36.6g$. Protein and lipid content of the 117 soybean seeds was 38.3% and 17.8%, respectively Protein contents of the 59 black soybean seeds (38.6%) were significantly higher than those of the 58 yellow soybean seeds (37.9%). However, lipid contents of the black soybean seeds (17.6%) were lower than those of the yellow soybean seeds (18.1%). Linoleic and oleic acid composition levels of the 117 soybean seeds were 53.75% and 22.08%. Unsaturated fatty acid levels of soybean seeds showed a statistically significant variability among the nine provinces of Korea, however, the differences were not found in the linoleic (18:2) and oleic acid (18:1) levels. Therefore, it was considered that the significant variability of unsaturated fatty acid were mainly due to the variations of linolenic acid (18:3) level. The composition levels of linoleic, oleic, palmitic (16:0), and linolenic acid in the yellow soybean seeds were 53.43%, 22.73%, 12.23%, and 8.24%, while those of the black soybean seeds were 54.13%, 21.48%, 12.47%, and 8.31%. Obtained results suggested that fatty acid composition levels were varied and possibly influence by the phenotype of seed coat colors. Oleic acid, mono-saturated fatty acid, showed the most remarkable variability between yellow and black soybean seeds, and the composition levels were higher in the yellow soybean seeds. Relationship between unsaturated fatty acid levels and 100-seed weights in the yellow soybean seeds showed a negative correlation (r=-0.513, P<0.01), but no relationship $(r=0.154^{ns})$ was observed in the black soybean seeds.

A Study on the Product Design Process in I-Business Environment Focusing on Development of the Internet-based Design Process - (e-비지니스환경에서의 제품디자인 프로세스에 관한 기초연구-인터넷기반의 디자인 프로세스 개발을 중심으로-)

  • 이수봉;이돈희
    • Archives of design research
    • /
    • v.16 no.1
    • /
    • pp.181-198
    • /
    • 2003
  • The purpose of this study is to develop a on-line design tool for effectively coping with e-Business environment, or product design process into a Cyber model for traditional manufacturers which attempts new product development under such environment. It was finally developed as a model named $\ulcorner$Design Vortal Site; e-BVDS) that was based on the structure and style of internet web site. Results of the study can be described as follows ; \circled1 e-Business is based on the Internet. All processes in the context of e-Business require models whose structure and method of use are on-line styles. \circled2 In case that a traditional manufacturing business is converted into e-Business, it is better to first consider Hybrid Model that combines resources and advantages of both such traditional and digital businesses. \circled3 The product design process appropriate for e-Business environment has to have a structure and style that ensure utilization of the process as an Internet web site, active participation by product developers and interactive communication between participants in designing and designers. \circled4 $\ulcorner$e-BDVS) makes possible the use of designers around the wend like in-house designers, overcoming lack in creativity, ideas and human resources traditional business organizations face. However, the operation of $\ulcorner$e-BDVS$\lrcorner$ requires time and budget investments in securing related elements and conditions. \circled5 Cyber designers under $\ulcorner$e-BDVS$\lrcorner$ can easily perform all design projects in cyber space. But they have some limits in playing a role as designers and they have difficulty in getting rewards if such projects completed by them are not finally accepted. \circled6 $\ulcorner$e-BDVS) ensures the rapid use of a wide range of design information and data, reception of a variety of solutions and ideas and effective design development, all of which are not possible through traditional processes. However, this process may not be suitable to be used routine process or tool. \circled7 $\ulcorner$e-BDVS$\lrcorner$ makes it possible for out-sourcing or partners businesses to overcome restrictions in time and space and improve productivity and effectiveness. But such they may have to continue off-line works that can not be treated on-line.

  • PDF