• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.664-671
• /
• 1998

Poly pyrrole polymer(ppy) has an excellent electrical conductivity and can be easily polymerized on anode to give various morophology according to doped anion on electroactive sites. To improve the properties of brittleness, ageing and hydrophobisity, poly furan polymer(pfu) having a high initiation potential was anodically implanted in this porous ppy film matrix to get the Pt/ppy/pfu(x)type of polymer composite electrode. Cyclic voltammetry and electrochemical impedance methods were used to these electrode, where $PF_6^-,\; BF_4^-$, and $ClO_4^-$ ions were employed as dopants. The composition of the pfu(x) at the electrode was changed from 0 to 1.10, but the range was useful only at 0.1 to 0.2 as the redox electrode. The polymer composite electrode doped with $PF_6^-$ was better in charge transfer resistance by a factor of 40 times and in double layer capacitance by a factor of 20 times than others. The charge transfer in the polymer film of the electrode was influenced on frequency change and equivalent circuit of this electrode had Warburg impedance including mass transfer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.33-33
• /
• 1997

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.251-256
• /
• 2004

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.689-692
• /
• 2005

In order to improve the electrochemical performances of Li-ion batteries when spinel $LiMn_2O_4$ is employed as a cathode active material, binary conductive agents were prepared using two different particle-sized carbons like Super P Black and $Vulcan^{(R)}$ XC-72R. The electrochemical performances of the $LiMn_2O_4$ cell system using binary conductive agents were evaluated in terms of specific charge and discharge capacities and cycle life. The cell with binary conductive agent in the 3:7 weight ratios of Super P Black and $Vulcan^{(R)}$ XC-72R showed better electrochemical performances due to the proper combination of ionic diffusion rate and electric contact.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2023

Silicon has been studied as an anode material for next-generation lithium ion batteries due to its high theoretical electrochemical capacity. However, the extreme volume change during the lithiation/delithiation and the inherently low electronic conductivity of silicon hamper the practical application of silicon anodes. Conductive polymer binders are effective means to solve these problems, and it has been reported that the performance of the silicon anode can be greatly improved through the proper molecular design of the conductive polymer binders. In this paper, representative recent studies on conductive polymer binders for silicon anodes will be introduced, and through this, binder design strategies to overcome the limitations of silicon anodes will be explored.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.329-331
• /
• 2006

연료전지용으로 많이 사용되는 전불소계 고분자인 Nafion은 좋은 기계적, 화학적 안정성 및 높은 이온전도도에도 불구하고 고가의 생산단가, 높은 메탄올 투과도, 그리고 MEA 재활용 문제 등으로 인해 상업적 응용에 제한이 있다. 본 연구는 불소그룹을 함유한 술폰화된 아릴렌이서계 블록 공중합체 고분자 전해질막의 제조 및 연료전지 특성에 관한 것이다. 이러한 고분자를 제조하기 위하여 양말단에 불소계 비닐기를 가지면서, 상온에서 술폰화 가능한 biphenyl계 단량체와 술폰화가 불가능한 sulfonyl계 단량체를 각각 합성하였으며, 이들로부터 다양한 몰조성과 분자량을 갖는 올리고머를 포함한 일련의 perfluorocyclobutane기를 포함하는 블록 공중합체를 열적 고리화 부가중합을 사용하여 합성하였다. 제조된 블록 공중합체를 상온에서 술폰화제인 chlorosulfonic acid를 이용하여 선택적으로 후술폰화시켜 강산 이온기인 sulfonic acid를 블록 올리고머에 도입하였다. 합성된 고분자들의 연료전지 특성을 Nafion-115와 비교하였다. 술폰화가 되는 올리고머 블록의 비율 증가에 따라 이온교환능력이 증가하였고, 그에 따라 높은 함수율과 이온 전도도를 나타내었으며 건조 및 습윤 상태에서도 기계적 강도가 우수하였다. 최적화된 블록공중합체를 대상으로 MEA를 제조하여 연료전지 초기성능을 측정한 결과 Nafion과 유사한 전기화학적 성능을 나타내었다.

• Journal of the Korean Chemical Society
• /
• v.38 no.7
• /
• pp.509-515
• /
• 1994

The interactions of 11 kinds of primary and secondary alkylammonium ions with cyclic (12C4, 15C5, 18C6, DT18C6 and DA18C6) and acyclic$(Q_2O_5)$ polyethers were investigated by NMR titration and conductometry. All of the alkylammonium ions under investigation form the relatively stable 1 : 1 complexes with crown ethers and acyclic polyether by H-bond. The interactions of alkylammonium ions with analogeous hosts having different size were in the order of 18C6 > 15C5 > 12C4, and the strengthes of donor atoms toward the alkylammonium ions were in the order of N > O > S. 18C6 forms more favorable interactions with primary alkylammonium ions than secondary alkylammonium ions, otherwise DA18C6 shows the opposite behaviors. The stability constants for complexations of 18C6 with the alkylammonium ions were determined conductometrically in methanol at 25$^{\circ}C$. The major factors affecting the stability of complexes were the type of alkylammonium ions, the length of alkyl-chain and the steric hindrance due to the structure of alkyl groups on complexation.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.176-176
• /
• 2003

강자성 반도체(DMS)는 반도체에 전이금속을 doping함으로써 반도체의 전자 수송 특성과 전이 금속 이온에 의한 자기적 특성을 동시에 발현할 수 있도록 설계된 물질로서 '스핀 전자공학'의 구현을 위해 현재 활발히 연구되고 있는 분야이다. 특히 높은 전기 전도도와 투명 광 특성을 가지는 ZnO계는 전이금속을 첨가 할 경우 상온에서도 강자성 특성을 보일 것이라는 연구가 발표 된 이후 큰 주목을 받고 있으며, 실제로 Tc가 상온 이상인 결과들이 최근 발표되고 있다. 그러나 PLD에 의해 증착 된 Co-doped ZnO 경우 강자성 물성의 재현성이 아주 낮은 것으로 알려져 있는 둥 강자성 발현의 기원이 아직도 명확히 규명되지 못한 상태이다. 이에 본 연구에서는 Co-doped ZnO 계의 강자성 발현의 기원을 밝히고자 고상 반응법을 이용하여 다결정계를 제조한 후 X-선 회절 분석과 Raman 분광법을 이용하여 제2차상의 존재 유무 및 Co 이온의 치환 정도를 분석하였다. 다음으로 방사광 EXAFS 분석을 행하여 ZnO내에서의 Co 이온의 원자가 상태를 분석하고, PPMS를 사용 M-T curve를 측정/분석함으로써 강자성 발현의 기원을 규명하고자 하였다.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2011

Composite membranes based on sulfonated poly(aryl ether) sulfone (SPAES) with different sulfated zirconia nanoparticles ($s-ZrO_2$) ratio are synthesized and investigated for the improvement of the hydration and the proton conductivity at high temperature and no humidification for fuel cell applications. X-ray diffraction technique is employed to characterize the structure and the size of $s-ZrO_2$ nanoparticles. The sulfation effect of $s-ZrO_2$ nanoparticles is verified by FT-IR analysis. The properties of the SPAES composite membranes with the various $s-ZrO_2$ ratio are evaluated by ion exchange capacity and water content. The proton conductivities of the composite membranes are estimated at room temperature with full hydration and at the various high temperature without external humidification. The composite membrane with 5 wt% $s-ZrO_2$ shows the highest proton conductivity. The proton conductivities are $0.9292\;S\;cm^{-1}$ at room temperature with full hydration and $0.0018\;S\;cm^{-1}$ at $120^{\circ}C$ without external humidification, respectively.