• Membrane Journal
• /
• v.14 no.1
• /
• pp.44-52
• /
• 2004

This paper concerns the development of a cationic polymeric membranes for direct methanol fuel cell. The crosslinked poly(vinyl alcohol) (PVA) membranes with poly(acrylic acid-co-maleic acid) (PAM) and hydroquinonesulfonic acid (HQSA) as the crosslinking agents were prepared according to the amount of crosslinking agents. The resulting membranes were characterized in terms of methanol permeability, proton conductivity, water content and ion exchange capacity. The methanol permeability and proton conductivity increased with increasing PAM content up to 9 wt% and then decreased. This trend is considered the effect of the cross linking rather than the introduction of hydrophilic groups. When the HQSA contents were varied, no interesting increases of proton conductivity, water content and ion exchange capacity were found.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.119-120
• /
• 2009

진공증착 및 이온플레이팅 방법을 이용하여 냉간 압연된 강판상에 알루미늄 피막을 형성시킨 후, 증발율 및 증기분포 변화를 측정하고 각 증착방법에서의 증발율에 따른 증기분포 변화를 비교 및 검토하였다. 본 실험에서의 이온플레이팅은 증발원 근처에 이온화전극을 설치하는 방법으로 고전류 아크 방전을 유도하여 $10^{-4}$ Torr 이하에서도 기존의 이온플레이팅에 비해 높은 이온화율을 얻을 수 있는 아크방전 유도형 이온플레이팅 (Arc-induced Ion Plating; AIIP) 방법을 이용하였다. 전자빔을 이용하면서 알루미나 크루시블을 사용하여 알루미늄을 증발시킬 경우 분당 $2.0{\mu}m$ 이상의 높은 증발율을 얻을 수 있었으며, 이온플레이팅의 경우 이온화된 증기의 상호작용에 따른 산란 효과로 증발율이 다소 낮아짐을 알 수 있었다. $cos^n\phi$로 이루어지는 증기분포의 결정인자(n)의 값이 진공증착의 경우는 1에 근접하는 것으로 나타났고 AIIP의 경우는 2 또는 그보다 더 큰 값으로 이루어지는 것을 확인하였다. 이로부터 이온플레이팅의 경우 불활성 가스의 존재 여부와 이온화율 또는 기판 바이어스 전압의 효과가 다른 조건에 비해 증기분포에 더 크게 영향을 미치는 것을 확인할 수 있었다.

• 대한치과보철학회:학술대회논문집
• /
• 1998.11a
• /
• pp.48-48
• /
• 1998

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.115-118
• /
• 2001

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.139-145
• /
• 1986

In order to study the influence of nitrate reduction to ionic balance in tissue of tobacco plant, differneces in amounts of those cations and anions were determined and these balances were compared with contents of organic acids and activities of nitrate reductase, while they were fertilized with different nitrogen sources ($NO_3-N$, $NH_4-N$, $NO_3+NH_4-N$) in water culture. The results of studies are summerized as follows; 1. Total uptake of inorganic cations was the highest in nitrate-fed plants, whereas that of inorganic anions showed the highest level in the plants grown with the mixture ($NO_3+NH_4$). The amounts of inorganic cations and anions were comparable in two treatments containing $NH_4-N$, but in plants treated with nitrate only had much higher level of inorganic cations than others. 2. Deficiency in the amount of inorganic anions in nitrate-fed plants was balanced with organic acids, dominantly with malic acid among them. But another two $NH_4-N$ fed plant sustained equilibrium between inorganic cations and anions. 3. Reduction of nitrate was raised in tissues of nitrate-fed plants. By the results of nitrate reduction, cations maintained equilibrium with nitrate ion were let loose. The replacement of inorganic anions with organic anions could be a compensation process for the loss of uptaken nitrate ions which must be reduced to be incorporated into organic N compounds.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.61-72
• /
• 1993

Result of this study indicate that two criteria must be met in order to have effective macrocycle-mediated transport in these emulsionsystem. First, one must effective extraction of the post transition metals, $Cd^{2+}$. $Pb^{2+}$ and $Hg^{2+}$ , into toluene membrane. The effectiveness of this extraction is greatest if log K values for the metal-macrocycle interaction is large. Second, the ratio of the log K values for the metal ion-receiving phase to the metal ion-macrocycle interaction must be large enough to ensure quantitative stripping of the metal ion at the toluene phase interface. Control of the first step can be obtained by appropriate selection of macrocycle donor atom, substituents, and cavity radius. The second step can be controlled by selecting the proper complexing agent for inclusion in the receiving phase. The order of the transport, when using the several $A^-$ species such as $SCN^-$, $1^-$, $Br^-$ and $Cl^-$ is the order of the changing degree of solvation for $A^-$ and the transport of the metals is also affected by the control of concentration for receiving species because of solubility-differences. In this study, we can seperate each single metal ion from the mixture of $Cd^{2+}$, $Pb^{2+}$, and $Hg^{2+}$ ions by using the toluene membranes controlled by optimized conditions. Transport of the single metal is also very good, and alkaline and alkaline earth metals as interferences ions did not affect the seperation of the metals in this macrocycle-liquid membrances but transition metal ions were partially affected as interferences for the post transition metal ions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.215-225
• /
• 2011

Metakaolin is a dehydroxylated form of the clay mineral kaolinite. Rocks that are rich in kaolinite are known as china clay or kaolin, traditionally used in the manufacture of porcelain. The particle size of metakaolin is smaller than cement particles, but not as fine as silica fume. This paper investigates the effect of the concrete containing metakaolin as a mineral admixture on the compressive strength and resistance properties to chloride ion penetration. In this study, the experiment was carried out to investigate and analyze the influence of replacement ratio of metakaolin and micro silica fume on the compressive strength and chlorine ion penetration resistance of concrete. All levels were water/binder ratio 30%, replacement ratio of metakaolin and silica fume were 0, 5, 10, 15, 20% respectively. The compressive strength of concrete using metakaolin tends to increase, as the replacement ratio increases but the chlorine ion penetration resistance was not so as lager as silica fume concrete. Therefore, the optimum mixing ratio of metakaoline to satisfy a properties of compressive strength and chlorine ion penetration resistance was was approximately10%.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.35-42
• /
• 2005

This study reports the effect of $Mg^{2+}$ ions on the behavior of the anionic surfactant in electrophoresis. Intractions of $Mg^{2+}$ ions with carboxylates and sulfonates resulted large changes in their apparent mobilities. A comprehensive analysis of the electroosmotic and electrophoretic mobilities reveals that major cause for the variation of the apparent mobilities of anions arises from the electroosmotic mobilities.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.479-486
• /
• 2007

Bicarbonate 완충용액에서 Co-RDE를 이용하여 RDE 회전속도와 완충용액 속의 염화이온이 Co의 부식과 부동화에 미치는 영향을 연구하였다. Co-RDE의 회전속도가 부식에 미치는 영향은 Levich 식과 일치하였으며 부동화 막을 파괴하는데 염화이온의 효과가 큼을 알 수 있었다. 혼합 전위 이론을 사용하여 대류확산 조건에서 회전속도의 증가에 따라 부식전위가 양의 방향으로 증가하는 모형을 발견하였다. Tafel 영역에서 Co의 용해반응과 수소가 발생하는 환원반응은 전하이동과 물질이동을 이용하여 설명할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.483-494
• /
• 1988

The adsorption behavior of aromatic acids on Amberlite XAD-4 resin was investigated by measuring the distribution coefficient by batch method. The adsorption of solutes on XAD-4 was affected by the several factors such as, analyte concentration, the pH of solution and concentration of pairing ion. The enhanced adsorption of solutes on XAD-4 in the presence of tetraalkylammonium salt as an ion pairing reagent, referred to as ion interaction, was suggested to follow a double layer model where the pairing ion occupies a primary layer at the adsorbent while the solute anion and other anions in the system comlpete for the secondary layer. Therefore, the ability of an ion pairing reagent to enhance solute adsorption depended significantly on the type and concentration of counter-ion and co-anion accompanying the ion pairing reagent or salt used for ionic strength control. In addition, a good linear relationship between the logarithm of capacity factors measured by batch and elution method as a function of the concentration of ion pairing reagent and methanol can be used to predict the retention in elution method on the basis of capacity factors measured by batch method.