• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2229-2231
• /
• 2005

Recently, damages of electronic equipments due to lightning surges coming from AC power lines are increasing. In this work, to propose the effective installation methods of surge protective devices(SPDs), the protective performances of SPDs in actual-sized test circuits were experimentally investigated. In order to obtain the lowest limiting voltage and best protection, long leads of SPDs in installation practices are significantly undesirable. An effective installation method of SPDs for AC mains was proposed. The way of installing SPDs at every branch circuits is more effective than that of installing a SPD near the point of entry.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1849-1851
• /
• 2003

To obtain a low ground resistance in high resistivity soil, long vertical ground rods are often used. However, if the lightning current or fault current with high frequency flow into the grounding system, the ground impedance is significantly increased because of the inductive behavior. This paper presents how the impulse current works on the long vertical ground electrodes. The different shape of current was impressed between ground rods and auxiliary electrode by using impulse generator and the ground impedance was calculated from the ground potential rise.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.269-272
• /
• 2003

The importance of the improving quality of electric power is being strongly raised, owing to an increasing use of sensitive and small-sized electronic devices and system. The transient overvoltage on low-voltage AC power distribution system are induced by direct or indirect lightning return strokes, and those can cause damage and/or malfunction of the utility system for borne automation, office automation and factory automation as well as medical equipments. The behavior of lightning surge transferred to the primary side from the primary side in distribution transformers were experimentally investigated the protection effect of low voltage SPD installed at the secondary side of distribution transformers was analyzed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.43-44
• /
• 2006

We have studied effect of Patterned Vertical Alignment (PVA) mode on electro-optical characteristics and stability of liquid crystal director upon electrode pattering. In the present studies, LC director field and stability of conventional PVA mode electrode patterns were analyzed and new type of electrode patterns were suggested. At last, comparison between this new type of electrode patterns to conventional electrode pattern types were followed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.483-484
• /
• 2005

The field sequential liquid crystal display (FSLCD) does not need a color filter so that it is suitable for high resolution display. However, FSLCD has a drawback which requires a fast response time of sub-5 ms. We have studied the FSLCD with electrically controlled birefringence (ECB) mode. The ECB mode exhibits fast response time, high transmittance, low operating voltage and adequate viewing angle with a help of optical compensation films. In this paper, we present electro-optic characteristics of the ECB mode using a discotic film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.446-447
• /
• 2006

We investigated the electro-optic characteristics of a fringe-field driven twisted nematic (TN) display using a LC with negative dielectric anisotropy depending on electrode structures. The fringe-field driven TN mode known to exhibit wide viewing angle and excellent color characteristics over a wide viewing range and high transmittance. However, when the electrode width and distance between them is large enough, the transmittance is lower than the conventional vertical field-driven TN mode. By narrowing the electrode width and distance, the transmittance reaches the same value of the conventional TN mode.

• Prospectives of Industrial Chemistry
• /
• v.23 no.1
• /
• pp.42-54
• /
• 2020

계속적인 충·방전이 가능하여 반영구적으로 사용이 가능한 2차 전지는 친환경 소재로 주목받고 있으며, 노트북 컴퓨터와 휴대전화, 캠코더 등 소형 전자기기뿐만 아니라 전기자동차의 핵심소재이다. 전기자동차 시장의 성장과 더불어 중대형 에너지 저장용 2차 전지 시장의 규모는 더욱 확대되고 있어 관련된 소재의 개발 경쟁과 관심이 날이 갈수록 뜨거워지고 있다. 따라서 소재개발 측면에서 2차 전지 핵심 소재의 물성 발현의 원리 등을 이해하고 최적 소재 설계를 위해서는 원자 레벨에서의 소재 설계 접근법이 필요하다. 따라서 실험적인 연구가 어려운 부분과 원자단위에서의 물질 현상에 대한 이해 그리고 연구 개발의 효율성 증진을 위해서 전산재료과학(computational materials science) 기술이 광범위하게 활용될 수 있다. 본 기고문에서는 리튬이온전지에서의 전극 소재에 대한 전산재료모사의 활용과 연구동향에 대하여 소개하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.616-619
• /
• 2009

새로운 미디어와 창의적인 발상으로 유비쿼터스 기반 상거래에 대한 요구는 날로 증가하고 있다. 사용자 참여형 U-commerce 비즈니스 시나리오를 구성하고, 이에 따라 디지털 아이템 상거래에 필요한 요구사항을 정의한다. 이를 위하여, 각 단계 별로 수익모델을 중심으로 서비스 흐름을 고찰하고, IPTV를 비롯한 휴대폰, 텔레매틱 단말, PDA 등 각종 U-Commerce 서비스가 가능한 단말에서의 양방향 서비스를 고찰하며, 설계된 분류체계를 SOA 기반 U-commerce의 실질적인 운영에 이를 활용가능하게 하는 것을 목적으로 한다. 특히, 본 논문에서는 UCC와 같은 P2P를 중심으로 하여 SOiVA(Service Oriented interactive Video Application)를 활용한 U-commerce 운영 서비스 요구사항을 연구하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.78-79
• /
• 2020

최근 하드웨어의 성능 및 소프트웨어 기술이 비약적으로 발전하면서 컴퓨팅을 위한 인프라 환경이 클라우드 기술 기반으로 활발하게 연구, 개발되고 있다. 이에 본 논문에서는 슈퍼컴퓨터로 대표되는 고성능 컴퓨팅을 분야에서 클라우드 기반 인프라 및 서비스를 제공하기 위한 KI Cloud 플랫폼을 소개한다. KI Cloud 플랫폼은 VM 기반으로 IaaS 서비스를 제공하고, 컨테이너 기술을 기반으로 HPC 사용자를 위한 PaaS 서비스를 제공하는 통합 플랫폼으로 설계 및 개발되었다.