• Environmental Analysis Health and Toxicology
• /
• v.17 no.1
• /
• pp.63-71
• /
• 2002

The thermal desorption-gas chromatographic (TD-GC) system has been constructed for the measurement of volatile organic compounds. The thermal desortion unit is composed of four major parts: 1) the control part; 2) the thermal desorption part; 3) the focusing part; and 4) the injection part. The peltier element was introduced to the focusing part for the temperature of the focusing tube to reach-35$^{\circ}C$. The system was tested for the linearity of the calibration curves and reproducibility of instrumental analyses using some disinfection by-products (DBPs) and BTXs (benzene, toluene and p-xylene). The coefficients of determination (r$^2$) for all the calibration curves made were higher than 0.998, and the coefficients of variation (CV) for triplicate measurements were all within 10％. The system also has been tested for field applicability. The analysis of field samples showed that there was no breakthrough problem in the sampling system and that the system could be applied to field measurements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.82-85
• /
• 1996

It is considered that the effect of radiation aging, such as electron beam due to the ultra-high voltage for transmission, on the physical properties and electrical characteristics of electrital insulating materials. Low-density polyethylene(thickness 100[${\mu}{\textrm}{m}$]) is selected as an experimental specimen. Fourier transform infra-red spectrum, X-ray diffraction, differential scanning calorimetry and scanning electron microscopy is used so as to analysis the physical properties, the morphological changes and the crystallinity of LDPE. And it is made an experiments of dielectric characteristics in the temperature range of 20[$^{\circ}C$]~120[$^{\circ}C$], in the frequency range of 30[Hz]~1.5$\times$10$^{5}$ [Hz] and in the applied voltage range of 300[mV]~1500[mV].

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2417-2419
• /
• 1999

Among educational environment, lighting's role is getting more important since it improves the visual tasks, capability of work, and it help to build both balanced mind and body. Also, since students spend most of their time inside rather than outside, students need appropriate illuminance everyday. If optimum illuminance, the color rendering properties and controlled distribution of lighting is given, people can decrease the fatigue of eyes, recover their health, and also, people can maximize their efficiency of work. In this paper, their is a comparison between the real illuminance and illuminance distribution due to the uniformity ratio of 2 or 3 dimensions by simulation.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1414-1416
• /
• 1997

The electrical breakdown characteristics of the synthetic fluids No.2 of KS class VII used for insulating and cooling the materials for the ignition coil are studied. Also, Benzotriazole(BTA) as the streaming electrification suppressant additive is added to the oil, and the change of electrical properties due to different BTA concentration is investigated. To investigate the electrical characteristics, the breakdown strength of each specimen by an experiment for AC breakdown are analyzed. The breakdown strength of specimen by adding BTA is higher than virgin specimen in low e region, but lower than that in high region because of melting BTA. It is considered that the effective content of BTA as charge suppressant additive is about 10[ppm] from the results of AC breakdown.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.12-12
• /
• 2007

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1172-1177
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW steam supply and power generation system. Three different test geometries have been chosen for the numerical simulation. The existing design for 300 kW HRSG system (CASE B) has been improved by geometry and position changes of inlet guide vanes along with gas velocity entrance angle at the diverging channel inlet (CASE C). Both cases has been compared with the case where hot combustion gas is directly injected without any guide vanes (CASE A). Improved design shows overall uniform velocity and temperature distribution compared to existing design.

• YAKHAK HOEJI
• /
• v.45 no.4
• /
• pp.347-351
• /
• 2001

A rapid and sensitive method for the determination of glyphosate, a phosphated amino acid herbicide, in whole blood is presented. After removal of protein, the whale blood was purified by using the anion exchange resin (Dowex 1), and derivatized with 9-fluorenylmethyl chloroformate (FMCL). Derivatized glyphosate from blood sample was injected onto a Whatman partisil 10SAX column and separated with 0.1M phosphate buffer (pH 2.5) and acetonitrile (ratio=3:1). The high performance liquid chromatography-fluorescence detection gave the detection limit of 86pg and linearity of 0.9999 in the range of 0.25 $\mu$g/ml and 25 $\mu$g/ml. The recoveries of glyphosate added to the blood samples were ranged from 75.3% to 100.4% compared to the samples prepared in water. The derivatized glyphosate was stable at various acidity and temperature. This method has been successfully applied to the blood samples of lethal intoxication with the herbicide glyphosate.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.175-182
• /
• 2001

Effective length factor approach for framed column design has long played an important design-aid role. This approach, however, is effective only when the columns are in the form of prismatic or uniform cross sections. Structural engineers who have to design or analyse framed columns with variable cross sections need some means to do their job. By using the finite element method, the stability analysis of the isolated compression members with variable cross sections and that of the framed columns are performed. The parameters considered in the stability analysis are taper and sectional property parameters of the columns, the second moment of inertia ratio of beam to column, and beam span to column height ratio. On the basis of the stability analysis results, effective length factor formulas for the columns with variable sections are derived.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1047-1053
• /
• 2009

This paper examined an applicability of optimum algorithm to develope an electric railway pole foundation automated design system. Based on the optimization theory that considered subgrade and bearing capacity characteristics, decided an optimum section of electric railway pole foundation. In this research, Optimum algorithm used the feasible direction method in structural analysis and design efficiently. Design variables are considered geometric properties and anchor bolt area of the electric railway pole foundation as optimum construction cost. Constraints are considered settlement., overturning and activity of foundation. And, also composed flexural and shearing strength. According to optimum analysis result., optimization theory is available more economical design comparing with railway pole foundation that is constructed by current standard drawing, and applicability verified in automated design system development.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.70-73
• /
• 2009

The aim of this research is to obtain a numerical material model for an amorphous glassy polymer, polycarbonate (PC), which can be used in finite element analysis (FEA) of the micro thermal imprint process near the glass transition temperature. An understanding of the deformation behavior of the PC specimens was acquired by performing tensile stress relaxation tests. The viscoelastic material model based on generalized Maxwell model was introduced for the material near Tg to establish the FE model based on the commercial FEA code ABAQUS/Standard with a suitable set of parameters obtained for this material model from the test data. Further validation of the model and parameters was performed by comparing the analysis of FE model results to the experimental data.