• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.572-579
• /
• 2009

This study is to investigate experimentally the flame structure and propagation mechanism in dust explosions and to provide the fundamental knowledge. Upward propagating laminar dust flames in a vertical duct of 1.8 m height and 0.15 m square cross-section are observed and flame front is visualized using by a high-speed video camera. Also, the thicknesses of preheated and reaction zone have been determined by a schlieren, electrostatic probe and thermocouple. The thickness of preheated zone in lycopodium dust flame is observed to be 4~13 mm, about several orders of magnitude higher than that of premixed gaseous flames. From the experimental results by a PIV(Particle Image Velocimetry) system, a certain residence time of the unburned particle in preheated zone is needed to generate combustible gas from the particle. The residence time will depend on preheated zone thickness, particle velocity and flame propagation velocity.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2016

When the oil is produced in the low temperature environment, wax can be accumulated in petroleum production system(pipeline, riser) and causes problems such as pipeline stucking, disturbance of the oil production. These problems can be lead to time-consuming and economic losses for flow assurance. For prediction and mitigation of wax deposition, it is necessary to measure the Wax Appearance Temperature(WAT) which is a temperature when the wax crystals start to be formed. WAT standard measurement method of transparent oil has to determine the cloud point of sample to the naked eye and cannot be applied to continuous change of the temperature. In this study, wax behavior of transparent oil samples are recorded depending on temperature using Visualized WAT Measurement System. Also, WATs of transparent oil samples are measured by image processing and compared with the result of the standard method.

• Journal of Chest Surgery
• /
• v.36 no.3
• /
• pp.189-193
• /
• 2003

The patient was a 30-day-old female infant with symptoms of severe dyspnea and cyanosis, when she was admitted to the ER. The echocardiography revealed DORV with subpulmonary VSD, and the diagnosis of Taussig-Bing anomaly was made. Two days after admission, an urgent operation was performed. The operation consisted of intraventricular tunnel repair and arterial switch operation. She was discharged, and after checking her chest X-ray through OPD, there was no interval change of cardiomegaly. She was then re-admitted, and the angiography revealed coactation of aorta. We performed a resection and end-to-end anastomosis of aorta. She is currently in good condition 11 months postoperatively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.707-722
• /
• 1992

Fracture of a cutting tool is one of the most serious problems in machining systems. Therefore, several methods have been proposed so far to detect cutting tool fracture. However, most of them have some problems from the viewpoint of practical applications. In this study, the feasibility of using acoustic emission and cutting force signals for the detection of massive tool breakages as well as small fracture of cutting tools were investigated. Turning experiments were performed using conventional carbide inset tools under realistic cutting conditions and the SM45C steel and heat treated SM45C steel were used as a workpiece. And the sensitivities of the AE and cutting force signals to the fracture of cutting tools were illustrated. Finally, a detection algortithm for the fracture of cutting tools was developed through the analysis of these dual signals in the several types of tool fracture.

• Korean Journal of Ecology and Environment
• /
• v.47 no.1
• /
• pp.1-12
• /
• 2014

Some blue-green algal species such as those in the genus Anabaena causing severe algal blooms can produce akinetes, resting spores, in aquatic ecosystems. Germinated akinetes staying in the sediment as "seed banks" grow into vegetative cells under favorable conditions of light intensity, nutrient, and temperature. Therefore, akinete plays an important role in forming the nuisance bloom. However, little information is available in the ecological study of akinetes compared to that of vegetative cells in Korea. This review reports ecological and physiological characteristics of akinetes, especially of the blue-green algal genus Anabaena. We also suggest the feasible area of akinetes in the freshwater ecosystems. We expect that the suggested studies associated with akinetes will contribute to further understanding the life cycle and ecology of Anabaena and other algae.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.187-192
• /
• 2007

A project is being implemented to develop the long distance energy transport technology using the chemical reactions. This project can be classified into three main research categories covering heat recovery reaction, long distance energy transport, and heat generation reaction. In this study, the methanol is selected as a system material since it shows several unique superior characteristics as follows: gaseous state of reactant and product, large heat of reaction, high yields of reaction at relatively low temperature, and also steady and economical supply. Furthermore, it is anticipated that the outcomes of this study can be widely applied to the related industries. A feasibility study was carried out to evaluate the economics of this technology which study was based on the following case: 10,000 households, 15km distance energy transportation, utilization of waste heat from power plant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.1
• /
• pp.13-24
• /
• 1983

A mathematical model for the two-dimensional unsteady flow was developed by introducing Abbott's implicit finite difference operator and double sweep algorithm, which could be applied to simulate the respose of a harbor against the intrusion of long waves through the entrance connected to open sea. In order to improve its accuracy corresponding to the field phenomena, bottom resistance, Coriolis force, wind effect terms were included and wave direction and radiating effect was considered. The result of seiche test was always stable and the amplitude was accurate. Some phase shift was occured, but it could be reduced by using small values of Courant number and many points per a wave length as well. A comparision with the Ippen and Goda's theoritical and hydraulic experimental works was fulfilled.

• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.21-25
• /
• 2010

Burnup of spent fuel should be determined accurately for the safety control of spent fuel. Especially, it is necessary to measure the burnup profile along the nuclear fuel axis. In the present work, an ionization chamber was designed and fabricated to measure the gamma ray profile inside the guide tube of spent fuel. The ionization chamber was composed of three parts; induction part, gas-inlet part, and sensor part. The sensor part had two electrodes; cathode and anode. A guide electrode was considered in the ionization chamber design to make the ionization chamber to be inserted easily into the guide tube. Pure gas (argon and xenon) was inserted into the ionization chamber, and the leakage current and saturation curve were measured to determine the operation characteristics of the ionization chamber. The gamma ray radiation was also measured in relatively high dose environment. The gamma ray profile of the spent fuel will be measured with the ionization chamber.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.113-120
• /
• 2008

In this study, The TRITGO code was introduced, which can predict the amount of tritium production, it's transport, removal, distribution and the level of contamination for the produced hydrogen by the tritium on the VHTR (very high temperature gas cooled reactor). The TRITGO code was improved so that the permeation to the IS Iodine Sulfide) loop for producing the hydrogen can be simulated. The contamination level of the produced hydrogen by the tritium was predicted by the improved code for the VHTR with 600MW thermal power. The contamination level for the produced hydrogen by tritium was predicted as 0.055 Bq/$H_2-g$. This level is three order of lower than the regulation value of 56 Bq/$H_2-g$ from Japan. From this study, the following results were obtained. it is important that the fuel coating (SiC layer) should be kept intact to prevent the tritium from releasing. Also it is necessary that the level of impurity such as 3He and Li in the helium coolant and the reflector consisting of the graphite should be kept as low as possible. It was found that the capacity of the purification system for filtering the impurities directly from the coolant will be the important design parameter.

• Journal of Chest Surgery
• /
• v.31 no.10
• /
• pp.1004-1008
• /
• 1998

We report a case of heart-lung transplantation in a 32 year-old female with Eisenmenger syndrome secondary to patent ductus arteriosus. She has been suffered from congestive heart failure since June 1996 and repeatedly treated at Intensive Care Unit with intravenous inotropic support since July 1997. Preoperative echocardiography showed a patent ductus arteriosus with right to left shunt, severe regurgitation of tricuspid valve and estimated right ventricular systolic pressure of 100mmHg. The brain-dead donor was an 18 year-old male with head trauma from traffic accident 3 days ago. Heart-lung block procurement was performed at another general hospital and was transported to the Seoul National University Hospital by ambulance. Total ischemic time of the transplanted heart and lung were 249 minutes and 270 minutes, respectively. The immunosuppressive therapy was commenced preoperatively with cyclosporine and azathioprine. Corticosteroid was not used until postoperative 3 weeks in order to avoid infection and delayed healing at the tracheal anastomotic site. The patient was discharged at 31st postoperative day, and has been regularly followed up at outpatient clinic without specific complication. The follow-up bronchoscopy, performed 2 weeks and 4 months after surgery, revealed no evidence of cellular rejection.