• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.278-284
• /
• 2006

We have fabricated and measured electrooptic modulator using coupled stack InAs/InGaAs quantum dots. The height of the quantum dot is 16 nm and quantum dots are stacked including an InGaAs capping layer. The peak wavelength of photoluminescence is 1260 nm at room temperature and 1158 nm at 12 K. The operation characteristics of the quantum dots show high modulation efficiency of electrooptic modulator at 1550 nm compared to that of existing III-V bulk and MQW type semiconductor. The measured switching voltage ($V\pi$) is 540 and 600 mV, for TE mode and TM mode, respectively. From the results, the modulation efficiency can be determined as 333.3 and $300^{\circ}/V{\cdot}mm$ for TE and TM modes. The results reported here may lead to the design and fabrication of a novel electrooptic modulator with low switching voltage and high efficiency.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.124-127
• /
• 2012

We designed and fabricated dichroic filters for high-power fiber lasers to protect the pumping laser diode from counterpropagating laser beams. The transmittance at laser diode wavelengths of 905 nm~925 nm was designed to be less than 0.1% and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm ~ 1100 nm was designed to be more than 99.9%. Since oxide materials have good adhesion to the $SiO_2$ substrate, $SiO_2/Ta_2O_5$ were used as coating materials. The filter was fabricated according to our optimized design and its characteristics were compared with the theoretical design. As a result, the transmittance at laser diode wavelengths of 905 nm~925 nm was measured to be less than 0.1%, and the transmittance at the fiber laser or Brillouin scattering wavelengths of 1020 nm~1100 nm was measured to be more than 95.5%, which coincided well with the theoretical design considering processing errors. The filter was found to operate well over 1W of input laser power.

• Korean Security Journal
• /
• no.53
• /
• pp.161-184
• /
• 2017

In general, security employees are more vulnerable to the risk of various incidents and accidents due to the specificity of their work, and they are less exposed to job satisfaction due to irregular working hours such as night shifts and physical labor. There is a concern that conflicts over turnover will be intensified. Therefore, companies should pay attention to job satisfaction, organizational commitment and turnover intention through effective human resource management of security employees who have influence on company's profit creation, so that companies should strive for competitiveness and development. The purpose of this study is to investigate the effect of casino security employee's job satisfaction on organizational commitment and turnover intentions in a questionnaire survey of security employees at Grand Korea Leisure Corporation. Frequency analysis, factor analysis, reliability analysis and multiple regression analysis were performed using SPSS 24.0. As a result of this study, it can be concluded that the higher the job satisfaction of the public enterprise security workers, the higher the organizational commitment and the lower the turnover intention. Therefore, if the company has competitiveness through effective human resource management that affects the wage satisfaction, promotion satisfaction, boss satisfaction and turnover intention affecting the organizational commitment, This study can be applied in the sense that it is possible to give.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.751-756
• /
• 2002

For the development of functional jang-products, kanjang was prepared using barley bran. Optical density of barley bran kanjang was significantly high at 15 days after fermentation, and the amount of extract was $2{\sim}3$ fold higher than that of soybean kanjang. Among the flavor components identified in barley bran kanjang, the content of 2-furancarboxaldehyde was the highest, followed by 4-vinyl-2-methoxy-phenol, benzene-acetaldehyde, palmitic acid, and methyl-9,12-octadecadienoate. In barley bran and soybean mixtare (1 : 1) kanjang, the content of 2-furancarboxaldehyde was the highest, followed by benzeneacetaldehyde, diethyl phtalate, palmitic acid, and 2-chloroethyl linoleate. Flavor components detected in both barley bran kanjang and barey bran and soybean mixture kanjang were 2-furancarboxaldehyde, benzaldehyde, benzeneacetaldthyde, 4-vinyl-2-mehtoxy-phenol, 1-furfuryl-2-formy pyrrole, dimethyl-1,2-benzenedicarboxylate, diethyl phtalate, palmiticacid, dibutyl-1,2-benzenedicarboxylate, and di-(2-ethylhexyl)phthalate.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.107-112
• /
• 2001

The various components of sigumjang were analyzed according to fermentation time. Aerobic bacteria were increased with fermentation time. Yeasts and molds were increased until 3 days after fermentation and then not changed. Six free sugars, 3 volatile organic acids and 6 non-volatile organic acids were detected. The content of free amino acids was $1,407.9{\sim}3,053.9\;mg%$. Glutamic acid was most abundant component among the amino acids, followed by phenylalanine, arginine and valine. The ratio of essential amino acid was $34.4{\sim}37.0\;mg%$. The content of mineral was $12,966.7{\sim}13,864.5\;mg%$. Potassium was the most abundant in quantity among the minerals in sigumjang except sodium which was added artificially. The principal fatty acids were linoleic acid, palmitic acid and oleic acid. The ratio of unsaturated fatty acids was $76.3{\pm}1.1%$. As a result of sensory evaluation, the highest score was obtained 3 to 5 days after fermentation.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.37-42
• /
• 2001

The concerns of the toxicity and health hazard of lead in solders have demanded the research to find suitable lead-free solder alloys. It was discussed that effect of the intermetallic formation and structure on the reliability of solder joints. In this study, lead-free solder alloys with compositions of Sn/3.5Ag/0.75Cu, Sn/2.0Ag/0.5Cu/2.0Bi were applied to the 48 $\mu$BGA packages. Also, the lead-free solder alloys compared with eutectic Sn/37Pb solder using shear test under various aging temperature. Common $\mu$BGA with solder components was aged at $130^{\circ}C$, $150^{\circ}C$ and $170^{\circ}C$. And the each temperature applied to 300, 600 and 900 hours. The thickness of the intermetallics was measured for each condition and the activation energy for their growth was computed. The fracture surfaces were analyzed using SEM (Scanning Electron Microscope) with EDS (Energy Dispersive Spectroscopy). These results for reliability of lead-free interconnections are discussed.

• Korean Journal of Ichthyology
• /
• v.27 no.4
• /
• pp.263-274
• /
• 2015

Change in morphological and biological characteristics of Japanese eel, Anguilla japonica, by maturation were determined by examination of 182 individuals collected in Korea waters from September to December 2014. Eels were classified into four stages based on the silvering index. The proportion of silver eels collected from streams and estuaries (34.6%) was higher than that from the freshwater reservoirs (3.8%). The sex ratio between female and male was 1:0.11 (n=182). Mean total length and weight were positively related to the silvering process. The ratios of head and pectoral lengths to total length and the ratio of horizontal and vertical orbital diameters to head length were significantly different between the maturation stages. However the ratio of pre-dorsal and pre-anal lengths to total length were not significantly different between the maturation stages. The gonado-somatic index was the single character that could identify the whole four stages among the indices examined: gonado-somatic index (GSI), condition factor (K), gut index (GI) and eye index (EI) but hepato-somatic index (HSI). One pseudo-silver eel collected. looked like a late silver eel in the S2 stage according to its external body color and morphology, but most of other characteristics suggested that it might be in Y1 (yellow eel) or Y2 stage (late yellow eel).

• The Journal of the Korean bone and joint tumor society
• /
• v.13 no.2
• /
• pp.75-80
• /
• 2007

Purpose: To investigate the quality of training hospital based treatment, we evaluated the soft tissue sarcoma treatments afforded by general orthopedic surgeon rather than orthopedic oncologist. Materials and Methods: We reviewed the details of 25 patients with pathologically confirmed soft tissue sarcoma who registered in our hospital between July 1997 and 2006 September. We evaluated initial diagnoses, the surgical treatment (including adjuvant therapy) and the follow up method used and related these to the principles of soft tissue sarcoma treatment. Results: The study cohort comprised 16 men and 9 women of mean age of 50.2 years. A diagnostic biopsy was performed in 9(36%) cases before definitive surgical treatment. Wide excision was performed in 13(52%) cases. For the 12 cases in which the grade of sarcoma was estimated, adequate surgical treatment with adjuvant therapy was performed only in 4(33.3%) cases. In addition, an adequate follow up schedule was adopted in only 4(16%) of the 25 study subjects. Conclusion: Unexpectedly, many cases of soft tissue sarcoma were treated inadequately even in a training hospital. An intensive education program on the treatment of soft tissue sarcoma is necessary for all orthopedic surgeons.

• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.17-23
• /
• 2006

In Vivo dosimetry is a method to evaluate the radiotherapy; it is used to find the dosimetric and mechanical errors of radiotherapy unit. In this study, on-line In Vivo dosimetry was enabled by measuring the skin dose with MOSFET detectors attached to patient's skin during treatment. MOSFET dosimeters were found to be reproducible and independent on beam directions. MOSFET detectors were positioned on patient's skin underneath of the dose build-up material which was used to minimize dosimetric error. Delivered dose calculated by the plan verification function embedded in the radiotherapy treatment planning system (RTPs), was compared with measured data point by point. The dependency of MOSFET detector used in this study for energy and dose rate agrees with the specification provided by manufacturer within 2% error. Comparing the measured and the calculated point doses of each patient, discrepancy was within 5%. It was enabled to verify the IMRT by using MOSFET detector. However, skin dosimetry using conventional ion chamber and diode detector is limited to the simple radiotherapy.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.142-145
• /
• 2003

The nonreciprocal phase shift characteristics of infinite slab optical waveguides with magneto-optic materials in the cladding layer was calculated at 1.55 ${\mu}{\textrm}{m}$ for optical isolators. The infinite slab waveguide structures considered in this paper were as follows. rho magneto-optic materials used as a cladding layer were Ce:YIG and LNB(LuNdBi)$_3$(FeAl)$_{5}$)$_{12}$,). Their specific Faraday rotations Θ$_{F}$ are 4500$^{\circ}$/cm, 500$^{\circ}$/cm at wavelength 1.55 ${\mu}{\textrm}{m}$ respectively. The guiding layer with multi-quantum well structure was used, and it consists of 1.3Q and InGaAs. In order to investigate the effect of evanescent field penetrating the cadding, layer, guiding mode characteristics were calculated for the cases when the substrate is InP and air. We calculated the minimum lengths of 90$^{\circ}$ nonreciprocal phase shifters and their optimum guiding layer thicknesses in various optical waveguide structures.res.s.