• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.452-459
• /
• 2007

Nutrient removal hybrid process to use suspended and attached growth microorganisms and apply the contact and stabilization process was process obtaining good results to HRT within 6 hours to dominate nitrifier and to promote separation and growth of autotrophs and heterotrophs to pack with EPS(Expanded Poly-Styrene) media in nitrification reactor. An average effluent quality of this process was below 5.2 mg/L, 7.3 mg/L, 4.9 mg/L as $BOD_5,\;COD_{Mn}$, SS concentration and 6.8 mg/L, 0.6 mg/L as T-N, T-P concentration. Also, An average removal efficiency of this process was 94.6%, 79.8%, 94.9% as $BOD_5,\;COD_{Mn}$, SS and 70.8%, 76.9% as T-N, T-P. 16S-rRNA analysis result of microorganisms attached to EPS media was researched Nitrosomonas and Nitrosococcus blown to ammonia-oxidizing bacteria cluster to include Gallionella and these microorganisms were researched to involve about 6% of biofilm attached EPS media. Consequently, this process was treated below 10 mg/L and 1.0mg/L as T-N, T-P concentration at short hydraulic retention time(about 6 hr) to dominate nitrifier.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.764-770
• /
• 2014

This study assessed analysis of N-nitrosamines by separation, identification, and quantification using a gas chromatography (GC) mass spectrometer (MS) with electron impact (EI) mode. Samples were pretreated by a automated solid phase extraction (SPE) and a nitrogen concentration technique to detect low concentration ranges. The analysis results by EI-GC/MS (SIM) and EI-GC/MS/MS (MRM) on standard samples with no pretreatment exhibited similar results. On the other hand, the analysis of pretreated samples at low concentrations (i.e. ng/L levels) were not reliable with a EI-GC/MS due to the interferences from impurity peaks. The method detection limits of eight (8) N-nitrosamines by EI-GC/MS/MS analysis ranged from 0.76 to 2.09 ng/L, and the limits of quantification ranged from 2.41 to 6.65 ng/L. The precision and accuracy of the method were evaluated using spiked samples at concentrations of 10, 20 and 100 ng/L. The precision were 1.2~13.6%, and the accuracy were 80.4~121.8%. The $R^2$ of the calibration curves were greater than 0.999. The recovery rates for various environmental samples were evaluated with a surrogate material (NDPA-$d_{14}$) and ranged 86.2~122.3%. Thus, this method can be used to determine low (ng/L) levels of N-nitrosamines in water samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.883-888
• /
• 2013

Coagulation and sedimentation tests were conducted with clay and three different coagulants of soil origin (AC-A, AC-B, AC-C) to determine optimal coagulant types and doses to remove algae in stagnant water bodies such as reservoirs. Raw water had an algal density of 2,950 cells/mL and was dominated by Cyanobacteria. Removal rates of algal density by clay (50 mg/L) were 49% and 85% after 10 and 30 minutes sedimentation, respectively. Other natural coagulants achieved 80-90% removal in 10 minutes and 89-94% removal in 30 minutes of sedimentation after adding 20 mg/L each. AC-A was the optimal coagulant from this study considering algal removal rates and other water quality parameters such as turbidity and pH. For the same removal rates of algae, raw waters with higher algal densities required higher coagulant doses although no strong corelation was observed. The coagulants of soil origin did not impact orgnic contents and pH of raw water, but remove phosphate up to 70%.

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.76-82
• /
• 1998

The feasibility of algae as means of removing nitrogen and phosphorus from secondary treated swine wastewater was studied. Among the tested 7 species of Chlorella vulgaris (UTEX 265), Chlorella sp. GE 21, Botryococcus braunii (UTEX 572), Botryococcus sp. GE 24, Scenedesmus quadricauda, Phormidium sp. GE 2, and Spirulina maxima (UTEX 2342), C. vulgaris was selected for its fast growth and abilities to remove nitrogen and phosphorus and to produce algal biomass from swine wastewater. C. vulgaris grew well at 35$^{\circ}C$, and the optimum initial pH for growth was 8.0. In the effect of light intensity, the growth of C. vulgaris was limited under a light intensity of less than 40 ${\mu}$E/$m^2$/s. The secondary treated swine wastewater contained 58.7 mg/l of total nitrogen and 14.7 mg/l of total phosphorus, and was diluted to 75, 50, and 25% with groundwater to be treated. Nitrogen and phosphorus were removed by C. vulgaris in all diluted swine wastewaters among which the most effective removal was in 75% swine wastewater (swine wastewater:groundwater=3:1). There was a tendency of linear increase in nitrogen and phosphorus removal time with increasing concentration of swine wastewater. Under the optimized culture condition, total nitrogen and total phosphorus were effectively removed to 95.3% and 96.0%, respectively, in 25% swine wastewater after 4-day incubation.

• The Korean Journal of Pharmacology
• /
• v.32 no.1
• /
• pp.83-91
• /
• 1996

The present study was designed to determine the effect of hydrocortisone on CA secretion evoked by histamine from the isolated perfused rat adrenal glands. Histamine (150 ug) given into an adrenal vein produced significantly CA secretion from the rat adrenal medulla. This histamine-evoked CA secretion was enhanced markedly by the pretreatment with the natural glucocorticoid hydrocortisone (30 uM) or the synthetic glucocorticoid dexamethasone 30 (uM) for 20 min, respectively. Hydrocortisone-induced potentiation of CA secretion evoked by histamine was inhibited by preloading with heparin (3.56 U/ml), an $IP_3$ receptor antagonist while more enhanced by forskolin (0.2 uM), a potent stimulator of adenylate cyclase. From the experiment result taken together, it is thought that hydrocortisone (glucocorticoids) can enhance the releasing effect of CA evoked by histamine from the isolated perfused rat adrenal medulla, which seems to be associated to accumulation of inositol phosphate as well as cyclic AMP in the rat adrenomedullary chromaffin cells.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.143-151
• /
• 2016

Shoreline armoring is a globally used engineering strategy to prevent shoreline erosion along stream, lake and reservoir coastlines. Armoring alters the land-water interface and has the potential to affect shoreline vegetation by changing nearshore geomorphology, hydrology, sediment composition and water quality. We quantified the effects of the artificial disturbances and alternation of the land-water interface on the community structure and distribution of shoreline vegetation in a large reservoir, Uiam Reservoir, Korea. More than 60% of shorelines were disturbed by armoring with retaining wall of concrete block, riprap and gabion in the Uiam Reservoir. The results of detrended correspondence analysis showed that the vegetation structures of the shoreline modified by armoring changed from hydrophyte-dominated to hygrophyte-dominated ecosystems. The shoreline armoring caused the disruption of gradual continuity in the water-land interface and the biological invasion by alien plants. The changes in distribution area of shoreline vegetation showed that the area of hydrophytic vegetation decreased and that of hygrophytic vegetation increased from 2010 to 2013. In conclusion, the human disturbance such as armoring, road construction, recreation etc. could lead to terrestrialization, the loss of transverse continuity and biological invasion in the shoreline vegetation of the Reservoir Uiam. Our findings suggest that redesigning or removing shoreline armoring structures may benefit nearshore hydrophytic vegetation for the conservation of novel shoreline ecosystems.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.263-271
• /
• 2016

This study investigated the hydraulic impact scope and dissolved oxygen (DO) concentration distribution by the micro-bubble aeration in the Juksan Lake located in Asan city in Chungcheongnam-do province. A tracing experiment for hydraulic impact scope was used which constituted a 20% rhodamine solution. A 160 m-guideline was installed in the horizontal direction of the micro-bubble jet flow and the rhodamine concentration, water temperature, and DO concentration were measured at depths of 1 m, 2 m, and 3 m at intervals of 10 m. In the Juksan Lake, the effective range of jet flow discharged by the micro-bubble generator was about 40 m, and after then the jet plume moved up to 80 m to 120 m through the advection and diffusion processes of ambient water. DO concentration in the lake was maintained at 7.4-12.6 mg/L during tracking experiment. The DO of the lake sediments improved from 0.2 mg/L to 8.0 mg/L after applying micro-bubble aeration. In conclusion, the micro-bubble aeration can be an effective technology for the management and improvement of water quality in an agricultural reservoir.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.272-278
• /
• 2016

Porous pavements are recommended as a Low-Impact Development (LID) method which is a strategy to develop a water cycle as close to a natural state as possible, and to solve the urban impervious surface problems. Porous pavements can yield a solution if it provides a more permeable surface with extra space to contain extra water from building roofs. But there are few applications in Korea because of a lack of recognition and experience. Highway engineers are mainly concerned about the infiltration of water into pavement structures. They worry about the weakening of the asphalt mixture and subgrade, and freezing during the winter season due to the infiltration of water. Meanwhile, hydrological experts doubt the effects of the amount of water to control during the flooding season, and environmental experts prefer a non-point pollution treatment system established beside highway. In this study, from reviewing the history and the body of literature about porous pavements, conclusions regarding the most advanced technologies were made. First, traditional thickness designs can be used for porous pavement, no extra distresses was found by weakening and freezing during the winter season. Second, hydrological design can be made by controlling the thickness of the pavement and the outlet of water. Third, the treatment efficiency of non-point pollution of porous pavements is not worse than any other method. Importantly, it's a more eco-friendly solution because of its lower requirement for de-icing agents.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.174-180
• /
• 2014

A plasma hydrophobic coating on commercial fish feed was conducted to prolong the floating time of feed, thereby enhancing the feed consumption rate and reducing the contamination of water in fish farms. The hydrophobic coating on the fish feed was prepared using an atmospheric-pressure dielectric barrier discharge (DBD) plasma with hexamethyldisiloxane (HMDSO), toluene and n-hexane as the precursors. The effect of the parameters such as input power, precursor type and coating time on the coating performance were examined. The physicochemical properties of the coating layer were analyzed using a Fourier transform infrared (FTIR) spectrometer and a contact angle (CA) analyzer. The water CA increased after the coating preparation, indicating that the surface changed from hydrophilic to hydrophobic. The FTIR characterization revealed that the hydrophobic layer was comprised of functional groups such as $CH_3$, Si-O-Si and Si-C. As a result of the hydrophobic coating, the floating time of the fish feed increased from several seconds to 3 minutes, which suggested that the plasma coating method could be a viable means for practical applications. Compared to the water CA measured as soon as the coating layer was prepared, the 6-day aged sample exhibited a substantial CA increase, confirming the aging effect on the improvement of the hydrophobicity.

• Korean Journal of Ecology and Environment
• /
• v.51 no.1
• /
• pp.86-95
• /
• 2018

The objective of this study was to describe the development and testing of an initial ecological health assessment model, based on the index of biological integrity (IBI) using fish assemblages, before establishing the final and currently used model for ecological health assessment, conservation and management of freshwater fish in Korea. The initial fish IBI model was developed during 2004~2006 and included 10 metrics, and in 2007 the final IBI 8-metric model was established for application to streams and rivers in four major Korean watersheds. In this paper, we describe how we developed fish sampling methods, determined metric attributes and categorized tolerance guilds and trophic guilds during the development of the multi-metric model. Two of the initial metrics were removed and the initial evaluation categories were reduced from six to four (excellent, good, fair, poor) before establishing the final national fish model. In the development phase, IBI values were compared with chemical parameters (BOD and COD as indicators of organic matter pollution) and physical habitat parameters to identify differences in IBI model values between chemical and physical habitat conditions. These processes undertaken during the development of the IBI model may be helpful in understanding the modifications made and contribute to creating efficient conservation and management strategies for stream environments to be used by limnologists and fish ecologists as well as stream/watershed managers.