• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.116-116
• /
• 2002

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.40-46
• /
• 2000

This study was conducted to investigate the comparison of storability on film sources and storage temperature and determine the proper condition for fresh Japanese mint in U storage. The fresh weight in storage was maintained well more than 40$\mu$m ceramic film(CE 40) thickness. The carbon dioxide, ethylene, and acetaldehyde contents in 80$\mu$m ceramic film(CE 80) was higher than those in CE 40. Those were not different among the storage temperatures, rather, those in 3$^{\circ}C$ and 1$^{\circ}C$ storage were higher than those in 1$0^{\circ}C$. The chlorophyll contents loss was promoted by above 5％ water loss and 0.5ppm ethylene contents, but mote than 4％ carbon dioxide contents restrained from degrading chiorophyll. The storage period in 3$^{\circ}C$ was 30 days that was twice longer than those in other storage temperatures. The visual quality was higher in CE 40 at 3$^{\circ}C$, and this plot was lowest in ion leakage that was shown the degree of chilling injury. It was concluded that storage temperature of at 3$^{\circ}C$ and packaged ceramic 40$\mu$m film to increase storability of Japanese mint would be favorable.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1095-1103
• /
• 2014

A packaging and distribution system for transferring individual live squids at low temperature was developed and compared to a conventional bulk container system. Ten live squids in individual packages were stored in a large container at low temperature ($0{\sim}10^{\circ}C$). Live squids in individual packages at $6^{\circ}C$ showed a survival rate of 84% up to 72 hours, after which the survival rate decreased. However, the survival rate remained at 60% up to 120 hours. Further, the squids survived up to a maximum of 7 days. Optimum temperature was $5^{\circ}C$, and the survival rate of the packages was 70% when stored at $5^{\circ}C$ for 96 hours. A distribution test was carried out using a refrigerator truck at $5^{\circ}C$, and the results showed a 100% survival rate up to 16 hours and over 90% survival rate after 20 hours. A rectangular container was the most favorable when loading the container into the refrigerator truck. In testing the required volume of supplied seawater, 100% survival rate was observed over 15 hours with 20 L of sea water or more. Therefore, a single squid needed 2 L of seawater. After refrigerator truck transportation, optimum temperature for fish tank storage was $5^{\circ}C$, at which the survival rate was over 90% up to 72 hours. Using a refrigerator truck at $5^{\circ}C$, live squids survived up to 7 days, maintaining marketability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.109.1-109.1
• /
• 2016

진공산업 분야에서 OLED 디스플레이가 큰 시장으로 성장하며 크라이오 펌프가운데서 특별히 수분만 집중적으로 배기할 수 있는 워터펌프(CWP or cold trap)가 각광받고 있다. 이에 현민지브이티(Genesis)는 중소기업청 중소기업개발지원사업의 일환으로 진행된 2014년도 구매조건부 신제품 개발사업에 선정되어 '극저온 G-M냉동기를 이용한 대용량 Cold Trap개발'과제를 수행하면서 32인치 급으로 수분에 대해서 30,000[L/s] 이상의 배기속도를 가지는 대형 CWP를 개발하고 있다. 그 일환으로 본 CWP에 장착할 80K에서 200W급 단단 G-M 냉동기를 2015년 국내 최초로 개발하였다. 본 HPS80200(200W @80K) 단단 G-M냉동기에 대한 성능시험을 수행하던 중 기존 평가방식에 보완할 부분이 있음을 확인하였다. 통상적으로 G-M냉동기의 냉동능력은 저온 스테이지 상단에 온도센서와 히터가 설치된 히터 블럭을 장착한 후 일정한 열부하를 인가하면서 77K 또는 80K에서의 냉동능력을 측정한다. 문제는 여기에 설치하는 온도센서의 장착 위치의 중요성이다. 즉, 어느 부위의 온도를 냉동기의 대표 온도로 정하느냐에 따라 냉동기의 성능 값에 큰 차이를 나타내기 때문이다. 실제 확인 결과, 온도는 히터블럭 내의 위치뿐 아니라 저온 스테이지 부위별로도 크게 차이를 보였다. 따라서 본 연구에서는 보다 합리적이고 정확한 냉동 능력 측정을 위해 77K 에서 냉동기의 질소 액화 능력으로 냉동능력을 평가하고자 하였다. 이를 통해 개발된 HPS80200냉동기의 보다 정확한 냉동능력(77K에서 200W 이상임을 확인함)을 측정할 수 있었고 냉동기의 저온 스테이지에서 대표온도로 설정할 수 있는 위치도 확인할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.420-427
• /
• 1991

The structure of fresh, salted and heated petiole tissue from Chinese cabbage was examined with optical microscope, and the pectin of the tissues was fractionated by successive extraction. The pectin in Chinese cabbage consisted mainly of high methoxyl pectin(pA) and low methoxyl pectin(pB). The pA content was converted to pB markedly by salting and heating at $60{\sim}70^{\circ}C$ for 30 min while heating the cabbage above 80 decreased pB content. The firmness of heated tissue was highly correlated with pB content(r=0.996). Cytorrhysis test showed that pore size of the tissue became smaller by salting and heating at temperature below $80^{\circ}C$.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.23-27
• /
• 2003

This study was conducted to develop the corrugated fiberboard box which is suitable to pre-cooling and low temperature distribution of chinese cabbage Consider from a cooling performance viewpoint, the folding type box with 5.4% vent hole ratio was most efficient for fast cooling and even temperature distribution in the packaging box. At the end of storage periods, the compressive strength of the folding type box was less than the bliss type box. However, the compressive strength of the folding type box after storage was higher than required safety compressive strength for long term storage. So the folding type box was considered to have no problems toy practical use. The shelf-life of the chinese cabbage packaged with the developed box was 6∼7 days which was 2∼3 days longer than usual packaging.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.504-508
• /
• 2008

The objectives of this study were to develope the economical process for bioethanol production from domestic triticale and investigate optimal fermentation conditions such as temperature, time, and enzyme concentration used to pre-treatment process. Triticale mash, containing 148 g of total sugar per 1 L of mash, was fermented with Saccharomyces cerevisiae CHY1011 at $33^{\circ}C$. Fermentation of mash supplemented with enzyme was completed within 48-60 hours, and the ethanol yield was 410.9 L/tonne of dry base. On the other hand, fermentation of mash without enzyme addition was completed within 36-48 hours, but the ethanol yield was 342.2 L/tonne of dry base. For optimal bioethanol production from triticale, viscosity reduction enzyme was added in the pre-treatment process, and the fermentation rate of triticale was 92.0-94.2%. In addition, the results showed that bioethanol production of triticale by low-temperature pre-treatment would provide higher ethanol production efficiency and lower operating costs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.307-307
• /
• 2007

압전액츄에이터 및 초음파진동자는 전자제품의 소형화 및 경량화, 의료기기, 모바일기기 및 소형로붓의 발전에 힘입어 그 활용범위가 넓게 확장되고 있다. 1960년 Smolenski등에 의해 $A(B_1,B_2)O_3$형 복합 페로브스카이트 구조를 갖는 강유전성 세라믹스에 대한 연구가 시작된 이래 $Pb(Co,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Zn,Nb)O_3-Pb(Zr,Ti)O_3$, $Pb(Mg,Nb)O_3-Pb(Zr,Ti)O_3$ 등 3성분계 세라믹스의 유전, 압전 및 강유전 특성에 대한 많은 연구가 진행되어 왔다. 그러나 압전성이 우수한 세라믹스들은 Pb가 포함되어 있기 때문에 $1000^{\circ}C$ 이상에서 PbO가 급격하게 휘발되는 성질에 따라서 조성의 변동이 생겨 재현성이 어려우며 이를 방지하기 위하여 과잉 PbO를 첨가시키기 때문에 환경오염뿐만 아니라, 경제적인 측면에서도 많은 문제점을 가지고 있다. 소결조제를 이용한 산화물 첨가법은 PbO의 휘발을 억제하는 저온소결 방법중 가장 효과적인 방법으로 알려져 있다. 따라서, 본 연구에서는 적층형 압전액츄에이터로 사용하기위한 저온소결 압전세라믹스를 개발하기 위하여 PZN-PZT세라믹스에 $Li_2CO_3$, $Bi_2O_3$, CuO 를 소결조제로 사용하여 $Li_2CO_3$의 첨가량 변화에 따른 압전 및 유전 특성을 관찰하였다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.41-44
• /
• 2001

Mechanical test of the Carbon Fiber Reinforced Plastics (CFRP) composite specimen was performed based on the ASTM code at the ambient and low temperature. Tension, compression in-plane shear, and inter-laminar shear properties of the composite laminates were evaluated experimentally using the Universal Testing Machine(UTM) system at the temperature of $24^{\circ}C$,$-76^{\circ}C$ , and $-196^{\circ}C$. From the test results it was found that the CFRP chosen for the Korea Superconducting Tokamak Advanced Research(KSTAR) magnet supporting post had smaller tensile strength and larger compressive strength at the low temperature than those of the ambient temperature because of material ductility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.99-99
• /
• 1999

투명전도막인 Ito(Indium Tin Oxide)는 flat panel display 와 solar cell 같은 optoelectronic 이나 microelectronic device에서 널리 이용되어 지고 있다. 현재 상용화되고 있는 거의 대부분의 ITO 박막은 sputtering법에 의해 제조되고 있으나 공정상의 이유로 15$0^{\circ}C$이상의 기판온도가 요구되어진다. 그런, 실제 display device 제조공정에서는 비정질 실리콘 박막이나 유기막 위에 ITO박막을 제작할 필요성이 증대되어 지고 있고, 또한 다른 전자소자에 있어서도 상온 ITO 박막 형성 공정에 대한 필요성이 증대되고 있다. 이러한 이유로 본 실험에서는 IBAE(Ion Beam Assisted Evsporation)을 이용하여 저온 ITO박막을 유기막 위에 증착하는 공정에 대한 연구를 수행하였다. 이렇게 증착된 ITO 박막의 결정성은 비정질이었다. 또한, 모든 display device 제작에는 식각공정이 필수인데 기존에 사용되고 있는 wet etching 법은 등방성 식각특성 때문에 미세 pattern 형성에 부적합？, 따라서 비등방성 식각에 용이한 plasma etching법을 사용하여 저온 증착된 ITO 박막의 식각특성을 알아보았다. 실험에 사용된 식각장비는 자장 강화된 유도결합형 플라즈마 식각장비(MEICP)를 사용하였으며, 13.56MHz의 RF power를 사용하였다. 식각조건으로 source power는 600W~1000W, 기판 bias boltage는 -100V~-250V를 가하였으며, Ar, CH4, O2, H2, BCl3의 식각 gases, 5mTorr~30mTorr의 working pressure 변화 그리고 기판 온도에 따른 식각특성을 관찰하였다. ITO 가 증착된 기판으로는 유기물 중 투명전도성 박막에 기판으로서 사용가능성이 클 것으로 기대되어지는 PET(polyethylene-terephtalate), PC(polycarbonate), 아크릴을 사용하여 기판 변화가 식각특성에 미치는 영향에 대해서 각각 관찰하였다. 식각속도의 측정은 stylus profiler를 이용하여 측정하였으며 식각후에 표면상태는 scanning electron spectroscopy(SEM)을 이용하여 관찰하였다.