• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.825-828
• /
• 1999

In this paper, we design the analog phase shifter for the elimination of the ghost signal. Compensation of the delay between the reference signal and the relatively delayed signal is possible. This phase shifter uses the vector summing method. We use for the attenuator in our system FETs. The phase shifter is operated at the 200MHz and composed by lumped elements. The proposed analog phase shifter is simulated by the HP ADS software.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.73-80
• /
• 1995

본 연구에서는 범용 구조해석 프로그램인 NASTRAN을 이용하여 실위성용 복합소재 태양전지판 구조물의 유한요소 모델링을 통해 진동특성에 대한 해석을 수행하였으며, 진동 특성 측정용 치구를 제작하고, 측정센서의 질량이 미치는 영향을 해석적인 방법으로 분석하였으며, 진동특성 측정시험을 수행하였다. 최종적으로 해석결과를 시험결과와 비교하므로써 태양전지판 구조물의 진동특성 시험방법을 정립하고 모델링기법을 검증하였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.53-59
• /
• 1994

The characteristics of the shielded suspended substrate strip transmission line(SSSL) are analyzed by the point matching method and the variational method in Quasi-TEM mode. The accuracy of this solution is confirmed by analyzing and comparing this solution with the empirical solution obtained from the same dimension. The characteristic impedance and the effective dielectric constant are also studied by increasing the air-layer height of SSSL.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.243-243
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.457-460
• /
• 1988

We present here a numerical solution for obtaining propagation characteristics including lossess for various modes of an multi-layered optical waveguide structure. The method is based on transmission line analogy. A comparison with other method shows the our results are accurate and simple.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.715-720
• /
• 1991

The electromagnetic fields radiated from an aperture on a conducting plance covered with a moving uniaxial plasma layer are analyzed. From wave equations in moving plasma and free space region, their solutions are obtained and radiation fields are determined by applying proper boundary conditions in each region. For a particular case of isotropic plasma layer, our results correspond to well-known results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.36-42
• /
• 1993

By the variational method, the coplanar waveguide(C.P.W) shielded by two conducting plates has been analyzed. The particular potential solution has been obtained for the boundary conditions in C.P.W. The characteristic impedance and the effective dielectric constant in C.P.W. have been obtained by the variational method using the potential function and the assumed basis function for charge distributions. To consider the effect of the conducting plate in C.P.W. two cases, with and without the top plate, have been analyzed and compared respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.28
• /
• pp.181-186
• /
• 1993

The objective of this paper is to present a method for synthetic performance and quality evaluation of dial up network modem in users place. In the past, universally recognized criteria have not been available to model switched network modem performance. Reasonable assurance of modem performance on the public switched telephone network by standardized test channel which is suggested by ELA(Electronic Industries Association). These tests of modem from a variety manufacturers more reflective of actual performance on the network.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.71-75
• /
• 1985

Transmission characteristics of a linear double rectangular taper is analysed by the trans-mission matrix of the taper. The total transmission matrix of the taper is obtained by multiplication of transmission matrices of smrjll taper sections which is decided into uniform length along the taper axis. The VSWR calculated from the transmission matrix is compared with those of Johnson and Matsumaru.

• Journal of the Korean Ceramic Society
• /
• v.38 no.2
• /
• pp.152-157
• /
• 2001

본 연구에서는 고유동, 저발열 및 고강도 특성을 발현하는 belite-rich cement(BRC)에 있어서 카르복실산계 유기혼화제를 사용했을 때 가용성 알칼리의 함량 변화에 따른 흡착거동과 유동특성에 미치는 영향성에 대해 검토하였다. BRC에서 알칼리 0.1~0.2 wt% 및 알칼리 설페이트 0.3~0.5 wt% 첨가시 슬럼프가 증가하거나 손실이 거의 없었으며, 그 이상의 함량을 첨가하였을 때 다시 유동서 저하를 가져왔다. 그러나, 보통 포틀랜드 시멘트(OPC)의 슬럼프 유지능력은 알칼리 및 알칼리 설페이트를 첨가할수록 감소되었다.