• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.82-89
• /
• 2005

Mandibular widening is one method of mandibular distraction osteogenesis, which has anatomic limitations such as curved surface, mandibular condyle and narrow arch. The purpose of this study was to understand the biomechanics of various mandibular widening procedures Experimental models consisted of 6 groups according to different osteotomy hues and distractor positions. The results of this study showed different expansion patterns. which meant the feed for proper approaches in mandibular widening.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.509-522
• /
• 1996

By studying the relationship between the morphology of mandibular symphysis and craniofacial morphology in classIII malocclusion, this study aims at deciding whether the morphogy of mandibular symphysis can be used as a predictor on the growth of mandible. The materials used for this study were the cephalometric radiographs of male class III malocclusion. The subjected age groups were 10-12(G1 group) and 20 and above(G2 group): 50 were selected from each group. Each group was again divided, according to the ratio of symphysis, into Large(L), Average(A), and Small(S). The results of this study were summarized as follows: 1. In average the ratio of symphysis, G2 group showed significantly bigger than G1 group(p<0.05) 2. In both G1 and G2 groups, the ratio of symphysis had no relationship with the measurements on the cranial base and the maxilla(p>0.05). 3. In both G1 and G2 groups, there was not distinct difference in the antero-posterior positions among L, A, S subgroups. 4. L and A subgroups showed significantly larger than S subgroup in lower gonial angle and chin angle in G1 group (p<0.05). 5. In the measurements on the vortical relation of the face, anterior total face height(ATFH) and anterior lower face height(ALFH) of L subgroup were significantly larger than that of S subgroup in G1 group(p<0.05) and also mandible showed a tendency to grow downward vertically. 6. In the measurements on the tooth position and inclination, L subgroup showed as compared with S subgroup a tendency of extrusion of maxillary and mandibular teeth in G1 group, but G2 group showed such tendency only in mandibular teeth. 7. In the measurements on the abnormal growth prediction by Schulhof, in G1, there was no significant difference among L, A, S sugroups. 8. In the correlative analysis of the ratio of symphysis and other measurements, G1 group showed significant correlationships in chin angle, PP/MP angie, ANS-Me and other, while G2 group showed the same only in MP-LIT and MP-LMMC(p<0.05, p<0.01). In summarizing the above, in the G1 group, consisting of young males, no difference was noted in horizontal relation between L and S subgroups; in vertical relation, L subgroup showed a stronger tendency of downward growth of mandible than S subgroup. In adult male G2 group, however, no distinct morphological difference of craniofacial complex by the ratio of symphysis.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.119-127
• /
• 1997

The configuration of mandibular symphysis is likely to be dependent upon the genetic predeterminants and/or compensatory adjustments onto functional demands. The interrelation of morphological distinctives of symphysis in conjunction to the craniofacial skeleton had been scarcely anecdotal, therefore, the objective was to determine the correlation of morphological modifications between the mandibular symphysis and craniofacial complex. Lateral cephalometric headfilms of 212 subjects were employed for the conventional measurements. The proportion of chin height against chin depth length was referred as chin ratio, then, Low Symphysis (IS) and High Symphysis (HS) groups were turned out by means of the chin ratio. These samples yielded 35 in LS and 35 in HS groups. The data per capita were statistically analyzed and the following results were drawn ; 1. Overall characteristics of the craniofacial skeleton in HS group manifested hyperdivergence and LS group showed hypodivergence. 2. Gonial angle increased as chin ratio increased and was highly correlated to the chin ratio. 3. The chin ratio presented high correlation to the vertical face height, especially in terms of the chin height to anterior face height and the chin depth to posterior face height. 4. The morphological configuration of chin was hardly correlated with hyoid bone position.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.535-548
• /
• 2001

The purpose of this study was to evaluate changes in soft tissue chin thickness and to investigate correlations between hard and soft tissues measurements after orthodontic treatment conducted by premolars extraction and incisor retraction. The sample consisted of 35 female adults with Angle classification class I or class II division 1 malocclusion. Using lateral cephalometric radiographs taken before and after treatment, hard and soft tissue structures were measured and reproducible six landmark on soft chin tissue were used to locate the various points of soft tissue contour of the chin. The res에ts were as follows : 1. There were signigicant correlations between pretreatment B-B', Pm-Pm' and pretreatment vortical skeletal measurements such as $MP{\perp}HP,\;MP{\perp}PP$, ALFH and between a-a', b-b', Me-Me' and measurements of sym-physeal morphology such as SL, SW, PL. 2. There were significant decreases at B-B', Pm-Pm' and significant increases at a-a', b-b' between pre-and posttreatment mea surements. 3. There were significant correlations among soft tissues changes and hard tissue changes except for changes at B-B' and the range of correlation coefficient was about 0.3-0.4. 4. There were significant differences at ${\Delta}UI-VP,\;LI{\perp}, and B-B' measurements between subgroups divided by posttreatment Pog-Pog' changes. 5. There were significant differences at ${\Delta}overbite,\;NPog{\perp}HP,\;and\;Me-Me'$ measurements between subgroups divided by posttreatment Me-Me' changes.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.87-97
• /
• 2011

Objective: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. Methods: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. Results: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. Conclusions: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.355-365
• /
• 2000

The treatment plan for orthognathic surgery must be based on accurate predictions, and this can be produced the most esthetic results. Treatment of prognathic mandible in adult is usually orthognathic surgery using mandible set back, but mandible with retruded chin point is needed additional chin augmentation. In this case, the directions between mandible and chin point are different therefore, the prediction of soft tissue reactions must be modified. In this study, we materialize the patients who was taken orthognathic surgery due to prognathic mandible, 11each(Group A) was taken only Bilateral Sagittal Sprit Ramus Osteotomy (BSSRO), 9each(Group B) was taken additional advancement genioplasty. The lateral cephalometric radiography taken 8 months later after orthognathic surgery by this patients were used. The results of this study were as follows : 1. The profile of lips was favorable after surgery due to upper lip to I-line became prominent and lower lip tc E-line was retruded. 2. In both group, upper lip moved posteriorly and nasolabial angle was increased. 3. The ratio of the soft tissue profile change in POGs point to skeletal B point movement was $84\%$ in group A and $66\%$ in group B, and there was statistical significance between group A and group B. 4. Vertical movement of hard tissue points is decreased in group A.

• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.314-324
• /
• 2010

Objective: The purpose of this study was to determine differences of mandibular anterior alveolar bone thickness and symphysial cross sectional area in 9 different horizontal and vertical facial types. Methods: By using the initial cephalometric radiographs of 270 adult patients (male 135, female 135), the authors measured the buccolingual thickness of anterior alveolar bone on the basis of the root axis and symphysial cross sectional distance. Results: The high angle group showed significantly thinner buccolingual alveolar bone width except for the CEJ area and lingual alveolar bone width ($p$ < 0.05). The low angle group and Class I, II average group showed similar or significantly thicker alveolar bone width than the Class I average group ($p$ < 0.05). The Class III average group showed significantly thinner buccolingual and lingual alveolar bone width than Class I and II average groups ($p$ < 0.05). The Class III high angle group showed minimal alveolar bone width in all facial skeletal types. No significant difference was found in the symphysial cross sectional area of the different vertical facial skeletal types ($p$ > 0.05). Conclusions: The results of this study found that Class III high angle patients have thinner mandibular anterior alveolar bone thickness; therefore, more attention will be needed to determine the incisor position during orthodontic treatment for this group of patients.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.241-246
• /
• 1996

The chin is one of the factors which express human character, and appropriately protruding chin is very important to harmonious profile, the purpose of genioplasty is to reshape the chin and improve the facial esthetics which is one of the purposes of orthodontic treatment. It can be classified as augmentation genioplasty which enlarge the chin vertico-horizontally and reduction genioplasty which smallen it. The examples to apply this procedure are as follows. 1. advancement of retruded chin 2. reduction of chin prominence 3. control of chin vertical dimension 4. correction of asymmetry

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.199-202
• /
• 1991

Chin is located on most prominent portion of the face, so make more important esthetic value in impression. So historicaly, many authors had made efforts on correction of deformed chin, termed genioplasty. But those technique have been performed on limited cases, which have normal shape or width of chin. In the cases with more narrow or short chin, location of mental foramen or root of incisors restrict the use of such technique. But modified genioplasty technique we used can be performed without any restriction and change of frontal profile of chin. So we report a case that was performed with modified horizontal step osteotomy for advancement genioplasty, which had been reported by Hinds and Kent, with some complications.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.33-41
• /
• 2000

Although it is well known that the chincup, used to correct a skeletal class III malocclusion in growing children, reduce the mandibular prognathism by arresting the growth of the mandibular length and rotating the mandible posteroinferiorly, the majority of the studies about chincup is focused on condylar head that plays an Important role in mandibular growth. The aim of this study was to evaluate the morphologic change of the mandibular symphysis where extraoral force is applied directly during chincup treatment. The data lot this study were obtained from lateral cephalometric radiographs of 62 growing children(chincup group:32, control group:30) with mixed dentition who had been accepted lot the orthodontic treatment at Chonbuk National University Dental Hospital. The results were as follows : 1. Symphysis height was increased both in chincup therapy group and control group during treatment. Symphysis depth was decreased or maintained the initial values in chin cup therapy group, whereas increased in control group. Posterior symphysis depth was decreased both in chin cup therapy group and control group, but anterior svmphysis detph was increased in control group, whereas decreased in chincup therapy group. 2. Chin depth and chin curvature were increased in control group, whereas maintained or decreased in chincup therapy group during treatment. Chin angle, menton ang1e and symphysis angle were decreased in control group, whereas increased in chincup therapy group. It suggested that bone deposition in pogonion area that occur normally with mandibular growth was supressed by direct contact of chincup. 3. When growing children wear chincup, symphysis morphology was maintained due to inhibition of forward growth at mandibular symphysis. It may be due to the suppression of bone deposition in anterior part of symphysis.