• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.47-55
• /
• 2000

Non-linear behavior of rock under compression can be predicted by a crack model. Crack growth in rock renders rock anisotropic. The degree of anisotropy is explained in terms of elastic moduli as a function of load level. In this study, we calculate the changes of elastic moduli due to crack growth numerically by using a crack model and compare these values with experimental results obtained from the measurement of ultrasonic wave velocities. Image processing technique is used to obtain the initial crack information needed for the numerical calculation of elastic moduli.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.80-80
• /
• 2002

Bi-Te게 열전재료는 200~400K 정도의 저온에서 에너지 변환 효율이 가장 높은 재료로써 열전냉각, 발전재료 등에 응용하기 위하여 제조방법 및 특성에 관한 많은 역구가 진행되어 왔다. 현재 산업화에 응용되고 있는 일방향응고법은 기계적 강도가 약하여 회수 율이 낮으며, 결정을 성장시키는데 비교적 장시간을 필요로 하기 때문에 제조 단가가 비싸다. 따라서 이와 같은 문제점을 보완하기 위하여 합금설계 및 가공공정에 대한 연구가 활발히 진행되고 있다. 이에 본 연구에서는 가스분사법을 이용하여 용질원자 편석감소, 고용도의 증가, 균일고용체 형성, 결정립 미세화 등 급속응고 장점을 이용하여 화학적으로 균일한 BI-TerP열전재료 분말을 제조하고, 열간압출 가공을 통하여 이방성의 향상과 함께 미세한 결정립으로 우수한 기계적 강도를 얻을 수 있도록 제조된 분말을 압출 가공하여 열전소자의 기계적 성질과 열전특성을 연구하였다. 그 결과 급속응고 및 압출 공정을 이용한 본 연구에서는 $10\mu\textrm{m}$이하의 미세한 조직과 함께 압출공정을 통하여 이방성을 향상시켰으며, 열전소자는 $2.5{\times}10^{-3}/K$이상의 Figure of merit값을 나타내는 우수한 열전특성을 나타냈다.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.144-149
• /
• 1998

A new method to calculate the spin reorientation angle of cone anisotropy from magnetization curves of magnetically aligned powder is suggested. The spin reorientation angle of polycrystalline $Nd_2Fe_{14}B$ determined by this method coincided with the results obtained from torque magnetometry or magnetization measurements on single crystal. The underestimation of about 9% is expected if the basal plane anisotropy is neglected in determination of the spin reorientation angle of $Nd_2Fe_{14}B$ at 4.2 K.

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.205-213
• /
• 2012

In this study, scaled model tests were performed to investigate the stability of twin tunnels constructed in anisotropic rocks with $30^{\circ}$ inclined bedding planes under the condition of lateral pressure ratio, 2. Five types of test models which had respectively different pillar widths and shapes of tunnel sections were experimented, where both crack initiating pressures and deformation behaviors around tunnels were investigated. The models with shallower pillar width showed shear failure of pillar according to the existing bedding planes and they were cracked under lower pressure than the models with thicker pillar width. In order to find the effect of tunnel sectional shape on stability, the models with four centered arch section, circular section and semi-circular arch section were experimented. As results of the comparison of the crack initiating pressures and the deformation behaviors around tunnels, the semi-circular arched tunnel model was the most unstable whereas the circular tunnel model was the most stable among them. Furthermore, the results of FLAC analysis were qualitatively coincident with the experimental results.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.241-249
• /
• 2006

Due to the long tectonic history and the very complex geologic formations in Korea, the anisotropic characteristics of subsurface material may often change very greatly and locally. The algorithms commonly used, however, may not give sufficiently precise computational results of traveltime data particularly for the complex and strong anisotropic model, since they are based on the two-dimensional (2D) earth and/or weak anisotropy assumptions. This study is intended to develope a three-dimensional (3D) modeling algorithm to precisely calculate the first arrival time in the complex anisotropic media. Considering the complex geology of Korea, we assume 3D TTI (tilted transversely isotropy) medium having the arbitrary symmetry axis. The algorithm includes the 2D non-linear interpolation scheme to calculate the traveltimes inside the grid and the 3D traveltime mapping to fill the 3D model with first arrival times. The weak anisotropy assumption, moreover, can be overcome through devising a numerical approach of the steepest descent method in the calculation of minimum traveltime, instead of using approximate solution. The performance of the algorithm developed in this study is demonstrated by the comparison of the analytic and numerical solutions for the homogeneous anisotropic earth as well as through the numerical experiment for the two layer model whose anisotropic properties are greatly different each other. We expect that the developed modeling algorithm can be used in the development of processing and inversion schemes of seismic data acquired in strongly anisotropic environment, such as migration, velocity analysis, cross-well tomography and so on.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.67-76
• /
• 1995

자기저항헤드용 Ni-Fe-Co/Cu/Ni-Fe-Co/Fe-Mn 다층박막에서 자기적 성질과 전기적 성질에 관하여 조사하였다. 저 포화자계에서 고 자기저항을 나타내는 스핀 밸브형 다층박막을 제작하기 위하여 Borond이 도핑된 p-type Si(100)기판위에 Ni-Fe-Co 단층박막과 Si/Ni-Fe-Co/Cu/Ni-FeCo, Si/Ni-Fe-Co/Fe-Mn 구조의 다층막을 제작하여 자기적 특성을 조사하였다. Ni-Fe-Co 단층박막의 자기적 특성은 고정된 아르곤 분압에서 박막의 두께 등에 의존성이 있는 것으로 나타났다. 또한 Si/Ni-Fe-Co($70AA$)/Fe-Mn 구조에서 Ni-Fe-Co와 Fe-Mn 계면에서의 두 자성층의 이방성 차이에 의해서 발생되어지는 교환자기이방성이 존재하였으며, 교환자기이방성자계값은 Fe-Mn 두께가 $150\AA$일 때 가장 큰 값을 나타내었다. Ni-Fe-Co texture와 교환자기이방성자계값은 Fe-Mn 두께가 $150\AA$일 때 가장 큰 값을 나타내었다. Ni-Fe-Co texture와 교환자기이방성자계값의 의존성을 알아보기 위하여 Ti, Cu를 바닥층으로 사용하였다. Ti을 바닥층으로 사용하였을 경우, 교환자기이방성자계값은 23.5 Oe 정도의 가장 큰 값을 나타내었다. XRD 분석결과, Ti 바닥층이 Cu 바닥층이나, 바닥층이 없는 경우와 비교하여 성막된 Ni-Fe-Co 자성층의 강한 fcc(111) texture를 형성하는 것으로 나타났다. 각각의 단층박막과 다층박막에서의 자기적 특성을 측정한 후, Si/Ti($50\AA$)/Ni-Fe-Co($70\AA$)/Cu($23\AA$)/Ni-Fe-Co($70\AA$)/Fe-Mn(150$\AA$)/Cu(50$\AA$)의 스핀밸브구조를 갖는 다층박막을 제작하였으며, 11 Oe의 낮은 포화자계값에서 4.1%의 고 자기저항값을 얻을 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.5-17
• /
• 2003

Using Rowe cell for vertical and lateral consolidate test, we concerned characteristics of vertical and lateral consolidation, and permeability on the remolded Decompoed Mudstone Soil in Phoang, and then, compared it with Oedometer test results. Indirect coefficients of permeability were calculated by the results of the coefficient of consolidation that were derived from 9 different kinds of methods. The values of indirect coefficients of permeability derived from ${\sqrt{t}}$ method and hyperbolic method were similar to the results of direct coefficients of permeability with respect to vertical drainage, but, in the case of lateral drainage, for all kinds of methods, the values of indirect coefficients of permeability showed overestimated ones. With vertical and lateral direct coefficient of permeability, by investigating the anisotropic effect with respect to permeability on Decomposed mudstone soil, we obtained average value, 13, with respect to anisotropic characteristics for all kinds of consolidation loadings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5C
• /
• pp.255-262
• /
• 2008

In order to investigate the strength anisotropy of compacted materials, a series of unsaturated and saturated-drained triaxial compression tests was performed. Three different orientation angles of the axial direction of samples with respect to the horizontal plane were investigated: ${\delta}=0$, 45 and 90 degrees. As the results showed, the suction rate on the strength of the unsaturated specimen was not influenced by ${\delta}$. And the effect of the angle ${\delta}$ on the strength was more pronounced on unsaturated specimen as compared to saturated specimen. Moreover, a new procedure was proposed to take into account the effect of the angle ${\delta}$ on the shear strength of unsaturated soils.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.449-455
• /
• 1997

The anisotropic etching behavior of single crystal silicon were studied in aqueous KOH solution. N-type (100) oriented single crystal silicon wafers were used for the study, and the $SiO_2$ layer, whose etching rate is known to be much slower than that of silicon in the KOH solution, was used as a mask for the silicon etching. The silicon etching rate and the etching properties are shown to be a function of etchant temperature uniformity, circulation speed, and circulation direction of the etchant as well as the etchant concentration and the temperature. The etching rate is increased as the temperature is increased from $10\mu \textrm{m}/hr$ to $250\mu \textrm{m}/hr$ in the range of $50^{\circ}C~105^{\circ}C$. Hillock density and height is observed to be correlated with the etchant concentration and the etch temperature. The variation of the hillock density was explained by the ratio between the etching rate of (100) orientation and that of (111) orientation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.493-496
• /
• 2007

본 연구에서는 국내 암석을 암종별로 총 292개 채취하였으며 열물성 측정 장비를 이용하여 이들 암석의 열물성을 측정하였다. 이와 더불어 암석의 물리적 특성을 측정하였으며 일부 시료의 경우 XRD 정량분석을 실시하였다. 이들 결과를 이용하여 암석의 열물성 특성과 열물성에 영향을 주는 인자를 파악하였다. 암석의 열물성 측정 결과 열전도도와 열확산계수는 화강암에서 가장 낮은 값을 보였으며 퇴적암, 변성암 순으로 나타났다. 또한 암종별 열물성 값의 범위를 살펴보면 변성암과 퇴적암에서 넓게 분포한다. 암석의 물성과 열물성과의 상관성 분석 결과 공극률이 증가함에 따라 열전도도와 열확산계수가 감소하나 상관성은 미약한 것으로 나타났다. XRD 분석 결과 암석의 열전도도는 석영($SiO_2$)의 함량에 따른 선형의 비례관계를 보였다. 이로써 암석의 열전도도는 암석을 이루는 광물의 종류에 의하여 영향을 받음을 알 수 있다. 차후 암석의 구성 광물입자의 배열 상태에 따른 열물성 특성과 퇴적암 및 변성암 시료에 대한 이방성 실험을 통해 편리, 층리 및 엽리 등에 따른 열물생의 이방성 정도를 분석할 예정이다.