• The KIPS Transactions:PartB
• /
• v.15B no.3
• /
• pp.189-196
• /
• 2008

In this paper, a CMOS digital image sensor, which consists of A/D conversion, motion estimation circuits, and an attention module for ROI (Region of Interest) detection is presented. The functions of A/D conversion and motion estimation are implemented by $0.6{\mu}m$ CMOS processing circuit as hardware, and the attention module is implemented outside the circuit as software currently. Attention modules are taken to improve limited applications of the smart image sensor. The current smart image sensor responses to the changes of intensity, and uses the integration time to estimate motion. Therefore it is limited in its applications. To make up for inherent property of the sensor from circuit design and extend its applications we decide to introduce perception solutions to the image sensor. Attention modules for still and moving images are employed to achieve such purposes. The suggested approach makes the smart image sensor available with additional functions for such cases that motion estimation or intensity changes are not observed. Experimental result shows the usefulness and extension of the image sensor.

• The Optical Journal
• /
• s.131
• /
• pp.37-41
• /
• 2011

휴대전화에 카메라가 탑재된 지도 10년 이상이 지났다. 점차 고해상도화와 더불어 카메라로서 점점 실용적으로 진화하고 있다. 장기간 배터리 구동의 필요성에서 저소비전력은 중요과제이고, 종래의 CCD 이미지센서에서 CMOS센서로 거의 대체되었다고 할 수 있다. 기기의 소형화에 동반해 탑재되는 카메라모듈의 소형화에 대한 요구는 매우 강하다. 특히 박형화된 표시부와 함께 실장되는 inside 카메라의 저배화(低背化)는 급속히 진행됐다. 모듈의 높이를 낮게 하기 위해서는 광학렌즈의 광로장을 적게 하는 것이 요구되지만 고해상도 때문에 이미 지사이즈가 대형화하는 경향과 상반된다. 본고는 광기술컨텍트 2010년 10월호에서 발췌한 것으로서 이미지사이즈를 유지하면서 고해상도화를 실현하는 미세 셀에서 성능을 확보하는 기술과 카메라모듈을 소형화하는 기술에 대해서 개괄하였다.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.603-611
• /
• 2014

When image sensor and lens are fixed on the module, mechanical errors often induce tilt, rotation, or narrow field-of-view of the acquired image. Therefore, the optical characteristics of image sensor modules should be tested by test equipments. This paper explains how to test the optical characteristics of images sensors. It also proposes the standardized description methods of optical characteristics tests which are similar with those of image acquisition characteristics tests. The proposed method helps the test equipments to perform image acquisition characteristics tests and optical characteristics tests together.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.77-95
• /
• 2014

In general, image acquisition characteristics tests of image sensors and modules vary widely according to the characteristics of image sensors and modules under test, the application purpose of target devices where image sensors and modules are mounted, and the functions of test equipments. However, some de facto standard tests are frequently used in industry fields. They differ only in several parameters e.g. thresholds for fault detection, and they can be applied to most image sensors and modules. In this paper, 11 typical tests are explained in detail, and they are described in a simple and clear form under single framework, which significantly reduces errors and saves efforts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.898-901
• /
• 2008

Measuring instrument module for biosensor activity is developed using CMOS image sensor and sensor network. Most of living organism in water as water flea, fish, etc are frequently used as biological sensor for monitoring the water qualify. The activity of biosensor is changed by the quality of water. The developed measuring instrument module can easily interface to the existing instrument.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2071-2077
• /
• 2010

Interface modules design between image sensor and external components are designed by FPGA (Field Programmable Gate Array) in this paper. Generally speaking, to satisfy synchronization for the poor quality data in image, SRAM is needed. To receive synchronization signal and image signal data with pixel dimension, the proposed interface logic technique is implemented. From the proposed technique, we can obtain more clear screen by implementing with pixel dimension. Operating frequency of image sensor and that of TFT-LCD are 50MHz and 6.5MHz, respectively. Most of control logic functions are embedded in FPGA. The designed logic gate counter has 33,216 and is designed by Quartus II.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.771-778
• /
• 2019

The traditional illuminance intensity detection method using a single sensor has a problem that uniformity of illuminance detection is deteriorated depending on the measurement position due to the narrow FOV characteristic. In order to overcome this problem, a method of detecting an average illuminance value through a plurality of illuminance sensors is used, but the complexity and detection error are increased. In this paper, we propose a illuminance intensity detection method based on a single image sensor with wide FOV. The proposed method can solve the problems such as system complexity and error increase of existing illuminance sensor. The test results show that the difference of average value is 12% using a illuminance sensor, 10.7% using five illuminance sensors, and 6.2% using an image sensor compared with the reference value using the color difference illuminometer. It is confirmed that the proposed method can easily and accurately detect the space illuminance with improved uniformity.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.255-260
• /
• 2007

무선통신과 하드웨어 기술의 발전에 의해 센서 네트워크에 사용되는 센서 노드의 성능은 점차 향상되어 가고 있다. 분만 아니라 최근에는 CMOS 이미지 센서 기술의 발전에 의해 센서 네트워크에 멀티미디어 데이터를 활용한 멀티미디어 센서 네트워크 연구가 활발히 진행 되고 있다. CMOS 이미지 센서는 기존의 CCD에 비해 저가격으로 생산이 가능하고 저전력의 특징을 가진다. 이러한 CMOS 이미지 센서를 활용한 멀티미디어 센서 네트워크는 기존의 센서 네트워크를 이용한 화재강시, 방법 시스템 등의 어플리케이션에 영상 데이터를 제공함으로써 보다 신뢰성있는 정보를 제공할 수 있다. 본 논문에서는 CMOS 이미지 센서를 이용한 이미지 센서 모듈과 이를 활용한 멀티미디어 센서네트워크를 설계 및 구현한다. 구현된 멀티미디어 센서 네트워크를 통해 이미지 데이터 수집을 테스트하고 그 성능을 분석한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.191-196
• /
• 2021

In this paper, we implemented an image sensor module possible of detecting color temperature in an indoor environment. The color temperature information in the video information acquired by the image sensor was matched with a color difference illuminometer to produce an LUT. An algorithm was developed so that color temperature information according to the received RGB values can be automatically calculated. As a result of measuring the color temperature with an image sensor indoors, an accurate result of less than 5.91% was obtained compared to the reference value. It was confirmed that the uniformity of 23.5% or more was excellent compared to the color temperature measurement result using a color sensor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.615-622
• /
• 2009

Advances in wireless communication and hardware technology have made it possible to manufacture high-performance tiny sensor nodes. More recently, the availability of inexpensive CMOS cameras that are able to capture multimedia data from the environment has fostered the development of Wireless Multimedia Sensor Networks (WMSNs). WMSN with the CMOS imaging sensor which is cheaper and consumes lower power than the CCD will not only enhance existing sensor network but also enable several new application such as multimedia surveillance sensor network, multimedia environment monitoring. This paper presents the design of a multimedia sensor network with the image sensor mote developed by us using the CMOS. Given new multimeida sensor network, the new image collecting protocol was tested and analyzed.