• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.30-35
• /
• 1997

물성치가 상이한 계에서 접합면을 포함한 전 영역내의 연속 응력장 개선방안을 제안하였다. 재료의 물성치가 100배 차이가 나는 직선보 예제에 대해 변위형 유한요소해에서는 접착면 상ㆍ하측에서 응력들이 불연속이며 상당한 차이를 보이고 있는데 반하여 본 연구에서의 응력장은 연속이며 접합면의 절점응력들이 이론해에 근접하고 있다 또한 본 연구에서의 연속 응력장으로 계산한 변형률 에너지는 수회 이내의 반복계산에서 이론해에 수렴하고 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.183-204
• /
• 2007

When a tunnel is excavated below groundwater table, the groundwater flows into the excavated wall of tunnel and seepage forces are acting on the tunnel wall. Such seepage forces significantly affect the ground reaction curve which is defined as the relationship between internal pressure and radial displacement of tunnel wall. In this paper, seepage forces arising from the ground water flow into a tunnel were estimated quantitatively. Magnitude of seepage forces was decided based on hydraulic gradient distribution around tunnel. Using these results, the theoretical solutions of ground reaction curve with consideration of seepage forces under steady-state flow were derived. A no-support condition and a supported condition with grouted bolts and shotcrete lining were considered, respectively. The theoretical solution derived in this study was validated by numerical analysis. The changes in the ground reaction curve according to various cover depths and groundwater table conditions were investigated. Based on the results, the application limit of theoretical solutions was suggested.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.79-84
• /
• 1991

A variational approach employing localized functional is presented to solve alternating magnetic field problems with open boundary. The functional used in the approach consists of the domain integral of finite element region only and the boundary integral of the interfacial boundary between the finite and infinite element regions. The boundary integral is obtained by transforming the infinite domain integral for the infinite element region into the interfacial boundary integral. The proposed algorithm is then applied to a simple two-dimensional problem where the analytic solutions are available. It is shown that the algorithm makes it possible to yield good agreements between the numerical and analytic solutions. and that it requires less computer storage memory and computation time than the conventional finite element method due to the reduction of the computing region.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.321-332
• /
• 2005

In this paper, the time-domain finite element formulations for axisymmetric linear viscoelastic problems, especially for the viscoelastic hollow sphere and cylinder, under various boundary conditions are presented with the theoretical solutions of them obtained by using the elastic-viscoelastic correspondence principle. It is assumed that the viscoelastic material behaves like a standard linear solid in distortion and elastically in dilatation. Numerical examples are solved based on the spherically symmetric, axisymmetric and plane strain finite element models. Good agreements are obtained between numerical and theoretical solutions, which shows the validity and accuracy of the presented method.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.20-29
• /
• 1997

내부공진은 2자유도계 이상의 다양한 비선형 시스템에 존재할 수 있으며 모드 사이의 진동에너지의 교환의 원인이 된다. 위에서 설명한 흡진기의 경우처럼 그 시스템의 동작에 필수적인 요소가 되기도 하며 직사각형 평판의 경우처럼 선형이론 으로는 예측불가능한 진폭변조된 진동을 유발하기도 한다. 이론적인 해석의 결과 다양한 분기와 여러가지 형태의 해를 가지며, 특히 주기적 정상해와 혼돈적인 해를 갖는 것이 밝혀졌다. 이러한 주기적 정상해는 구조물에 따라 여러 가지 형태로 나타 나며 평판의 경우는 진폭변조된 움직이는 파형으로, 본문에서는 언급하지 않았지만 현의 경우는 타원의 퀘적의 크기와 주축의 방향의 변화로 나타난다. 이러한 다양한 해들은 구조물의 종류와 형상에 따라 다른 형태로 나타나며 향후 연구의 대상이라 생각되어진다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1447-1454
• /
• 2013

In this study, we developed the equation of ship wave crests in intermediate as well as deep waters by extending Kelvin's (1887) theory using the recursive relation for the dispersion relation. The present equation can be applied for varying water depth as well as constant water depth. Using FLOW-3D we conducted numerical experiments to verify analytical prediction. The ship wave crest patterns became asymmetric on a plane slope when the ship propagates alongshore direction. That is, in shallower side, wave crests tend to be parallel to the coastline due to refraction and, in deeper side, wave crests tend to be orthogonal due to reverse refraction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.259-269
• /
• 2006

In this paper, the stress intensity factor, energy release rate and crack opening displacement are computed using the finite element method for axisymmetric viscoelastic cylinders with the penny-shaped and circumferential cracks. The triangular elements with quarter point nodes are used to describe the stress singularity around the crack edge. The analytical solutions are also derived by using the elastic-viscoelastic correspondence principle and compared with the numerical results to show the validity and accuracy of the presented method. Viscoelastic materials are assumed to behave elastically in dilatation and like a three-parameter standard linear solid.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.1
• /
• pp.218-227
• /
• 2001

The purpose of this study was to estimate that the relations of weathering speed and shear strength of granite soil by tracing the weathering depth of granite soil from the very moment of its cutting. The results obtained this follows : This paper is about seismic performance of the EDF(Electricite De France) system, that is among various base isolator. A rational modeling of EDF system has been presented that used Nllink element. We get theoretical solutions of equation of motion of the system and compared with numerical solutions using a finite element program. The unification modeling is made by comparing with behavior using Newmark-${\beta}$ method when input earthquake acceleration data. Thus, a verified modeling will apply bridge structures or multi-degree of-freedom systems.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.149-158
• /
• 1995

When hot-rolled wide flanges are used as vertical compressive or bending member, opening web are often to take a space for equipments of pipe or duct. The Web of hot-rolled wide flange steel with opening may be analyzed as a rectangular plate, subjected to in plane force, and the buckling load is governed by the ultimate force of web. The result of the theory showed close agreement with the result of the finite element analysis. It was also shown that the buckling loads of stiffened opening plates could be larger than those of the plate. The stiffened opening plates for the 4-side simply supported case showed more stiffening effect than the Two Opposite Elastic Supports and Two Other Opposite Simply Supports case. In this study, we proposed the effective opening sizes that buckling loads of stiffened opening plate could be greater than those of the plates.

• KDI Journal of Economic Policy
• /
• v.33 no.4
• /
• pp.119-142
• /
• 2011

The storm and flood insurance, which was introduced recently to substitute the disaster relief system to moderate government's financial burden and enhance people's effort to reduce damage, seems to suffer various problems. This paper conducts a theoretical analysis on various aspects of the storm and flood insurance to provide insight on those issues and draw policy implications. First, the coexistence of disaster relief with the storm and flood insurance is likely to harm the penetration of the storm and flood insurance. Second, the current premium system is likely to induce people to make less efforts to reduce damage due to moral hazard problem. Third, current support for damage-reducing efforts may not fulfill its purpose and hence should be scrutinized carefully.