• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.398-402
• /
• 2007

본 연구에서는 삼각 요소망을 구성하는데 사용되는 기존의 Delaunay Triangulation 기법 외에 Advanced Front Technique 알고리즘을 적용하여 하천의 경계가 중요시되는 해석 모델에 적합한 삼각 요소망을 생성하고자 한다. Advanced Front Technique 알고리즘은 외부 경계를 따라 삼각 요소를 형성하기 시작하여 전체 해석 영역으로 요소를 채워가는 방법이다. 이 방법은 위에서 언급한 Delaunay Triangulation 기법의 단점인 해석 영역의 경계에서 요소의 형질이 좋지 못한 문제를 극복할 수 있을 뿐만 아니라, 미리 절점을 생성하지 않으므로 메모리를 절약하는 효과도 얻게 된다. Advanced Front Technique 알고리즘은 외부 경계의 노드(i)와 노드(i+1)을 Front로 하고, 이등변삼각형을 이루기 위해 해석 영역 내부의 적절한 위치에 새로운 절점(C)을 생성한다. 이렇게 Front와 새로운 절점(C)으로 이루어진 이등변 삼각형 요소가 생성된 후에, Front는 다음 Front로 전진하면서 점차 해석 영역의 내부로 삼각형 요소를 채우게 된다. 이와 같은 방법에 의해서 해석영역의 경계에서는 비교적 이등변 삼각형에 가까운 삼각 요소가 생성된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.709-720
• /
• 2014

In this paper, we studied miniaturization of LPDA(Log-Periodic Dipole Array) antenna used for VHF and UHF bands. To miniaturize the LPDA antenna, in this study, the radiation elements in a low frequency were changed into a triangular meander structure which has small current cancelation effect at feed part. For the triangular meander structure, an isosceles triangular and right triangular meander structures were proposed and the LPDA antennas were miniaturized by using the two meander structures. Also, the simulated and measured results were compared for the two miniaturized LPDA antennas. As a result, the isosceles triangular meander and right angle triangular meander structure applied LPDA antennas were reduced up to 60.5 % and 72.4 % compared a basic LPDA antenna, respectively. Consequently, we confirmed that the triangular meander structure is suitable for miniaturization of a LPDA antenna.

• Journal of Power System Engineering
• /
• v.13 no.2
• /
• pp.30-35
• /
• 2009

Numerical Calculations for dimensionless pressure drop (friction factor times Reynolds number) have been obtained for fully developed laminar flow of MPL(Modified Power Law) fluid in isosceles triangle pipes. The solutions are valid for Pseudoplastic fluids over a wide range from Newtonian behavior at low shear rates through transition region to power law behavior at higher shear rates. The analysis identified a dimensionless shear rate parameter which for a given set of operating conditions specifies where in the shear rate range a particular system is operating, i.e., Newtonian, transition or power law region. The numerical calculation data of the dimensionless pressure drop for the Newtonian and power law regions are compared with previously published asymptotic results presenting within 0.16 % in Newtonian region and 2.98 % in power law region.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.431-436
• /
• 2003

In this paper, simulation results of an electromagnetic field and mode distributions in a cylindrical reverberation chamber were presented. Reverberation chamber is an alternative test facility for a semi anechoic chamber, which is widely used for the analysis and measurement of electromagnetic interference and immunity tests. The method of computing the number of modes in a cylindrical reverberation chamber was presented and the number of modes in a cylindrical reverberation chamber with the same volume was compared with the different ratio of radius to height. The FDTD method was used to produce field characteristics inside of rectangular, right-angled isosceles triangular, and cylinder type reverberation chambers with the same test volume.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.76-81
• /
• 2006

This paper deals with a fuel metering unit (referred to as FMU) for air breathing engine. The proposed FMU consists of a constant pressure drop valve and a metering valve, both of which are controlled by servovalve. Linear analysis derived from a nonlinear mathematical model of FMU is carried out to find major parameters on the system performance. Numerical results using established model of FMU were in good agreement with the experimental results. It is also shown that the system stability is improved by reducing the constant pressure drop at metering valve and applying the triangular orifice to constant-pressure-drop valve through the simulation and experiments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.2 no.1
• /
• pp.54-64
• /
• 1984

This paper is a study on structural measurement by using a terrestrial camera. The aim of this paper is to understand the method of a composition by analyzing the geometrical compositive ratio of threestoried pagodas at Gamun-Sa, Gosun-Sa, Bulguk-Sa, Seated iron Buddha in Kwang-Jn, and Main-Seat Buddha at Sukkuram Cave-temple. Measured data and contour maps are accurately obtained by means of photogrammetry, and the following points are able to he found by analyzing them. At first, for Stone Pagodas. the breaths of the Okgesuks are made to the ratio, 8 : 7 : 6. And when an equililateral triangle and an 45$^{\circ}$ isosceles triangle are drawn of which the bases are the length of the upper Gabsuk, and then a circle is drawn whose radius is the length between the vertexes of the two triangles and its center is the vertex of the former the circle passes the upper line of the third Oksin. Also it can be found that an $70^{\circ}$ isosceles triangle being drawn at base line, the triangle passes the edge point of the upper Gabsuk and the center of the third Okgesuk. Also for Budha statues, it can be found that circles whose center is that of eyes can be drawn, and if 2 lines which pass the shoulder and the center of Buddha's body are extended, they intersect the knees.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.355-360
• /
• 2012

In this paper, an stepped-impedance low pass filter(SI-LPF) of triangular-patch type is proposed. A SI-LPF designed according to the standard SI-LPF design procedure is folded as a right angled triangle. The figure of merits of this structure are the adjustabilities of the cut off frequency, the stopband and the attenuation pole frequency of the proposed LPF by varying the resultant slots after folding the SI-LPF compactly for miniaturization. The size of the fabricated LPF is $13.75mm{\times}6.875mm$, which is 24.4 % reduced one compared to that of the conventional SI-LPF. The measured results of the LPF show return loss of less than -10 dB at passband, insertion loss of less than -10 dB at stopband and wide stopband from 3.5 GHz to 10 GHz (about $3f_c$).

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.460-466
• /
• 2011

Kameun temple was constructed in A.D. 682 after 46 year after Chumsungdae was constructed. This paper discusses the scientific implication of Taegeuk stone rods of Kameun temple site through the geometric analysis of their engraved figures. So we can estimate that the west Taegeuk of Kameun temple site has 2 circles comparing the path of the moon with that of the sun leading to the asymmetry in its emblem(Taegeuk) and the east Taegeuk of Kameun temple site has 1 circle representing the path of the sun. The Taegeuks along with around 30 equilateral triangles representing the north latitude $35.8^{\circ}$ give the explicit information of period of the orbit of the moon and the sun. These mathematical methods can explain some relics structure of antiquity with a few historical expounds.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.160-174
• /
• 2008

In this paper, we propose new coding techniques for photometry data of three-dimensional(3-D) mesh models. We make a good use of geometry and connectivity information to improve coding efficiency of color, normal vector, and texture data. First of all, we determine the coding order of photometry data exploiting connectivity information. Then, we exploit the obtained geometry information of neighboring vortices through the previous process to predict the photometry data. For color coding, the predicted color of the current vertex is computed by a weighted sum of colors for adjacent vortices considering geometrical characteristics between the current vortex and the adjacent vortices at the geometry predictor. For normal vector coding, the normal vector of the current vertex is equal to one of the optimal plane produced by the optimal plane generator with distance equalizer owing to the property of an isosceles triangle. For texture coding, our proposed method removes discontinuity in the texture coordinates and reallocates texture image segments according to the coding order. Simulation results show that the proposed compression schemes provide improved performance over previous works for various 3-D mesh models.