• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.510-515
• /
• 2016

최근 우리나라의 남해고속도로 상에 있는 해상 교량의 교각에서 부식이 발생하였다. 이 해상 교량의 부식 손상부위를 보수하기 위하여 희생양극식 전기방식을 설치하였다. 본 연구에서 소개한 해상교량의 경우, 구조물의 상부에서는 부식이 발생되지 않았기 때문에 해수에 의한 조수간만의 영향을 받는 간만대와 비말대 부분에만 희생양극식 전기방식을 설치하였다. 해상교량에 희생양극식 전기방식을 설치한 후 약 8년이 경과된 시점에서 희생양극식 전기방식의 성능을 검증하기 위하여 방식전류, 방식전위 및 복극량을 측정하였다. 전체 60개의 교각에 설치된 희생양극식 음극방식의 성능에 관한 실험 결과는 방식 양호(13개 교각), 부분 방식(27개 교각), 일시적 오류(7개 교각), 피복 들뜸(13개 교각)과 같이 4부분으로 분류하였다. 방식성능이 불량한 교각에 대해서는 양극의 추가 설치 및 Jacket 시공 등과 같은 추가적인 조치가 필요하다고 판단된다.

• 대한토목학회논문집
• /
• 제32권6B호
• /
• pp.345-354
• /
• 2012

본 연구의 목적은 국내 대표 수변 식생에 대한 조도 실험을 수행하여 n-VR 방법에 기초하여 각 식생에 대한 조도계수 산정식을 개발하고, 이를 하천설계시 조도계수 선정을 위한 가이드라인으로 활용하는 것이다. 실험 대상으로는 달뿌리풀, 물억새, 갈대를 선정하여 완전침수조건과 부분침수조건을 구현하여 실험을 수행하였으며, 실험결과 분석을 통해서 각 식생에 대한 n-VR 관계를 제시하였다. 달뿌리풀, 물억새 및 갈대 등은 유사한 조도계수를 가지는 식생군으로 묶어서 분류하는 것은 가능하나 식생 강성의 영향을 크게 받는 것으로 나타났다. 또한 갈대의 실험 결과 비교를 통해서 식생의 성장 시기에 따라 조도계수의 특성이 변화하는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.643-649
• /
• 2014

In order to demonstrate the possibility of applying an ionic polymer metal composite (IPMC) to a finger exoskeleton, pinching motion analysis was performed for a thumb-index finger dummy actuated by IPMC actuators. The IPMC actuators of 5mm in width and 40mm in length with 2.4mm thickness generated 1.52N of blocking force for the applying voltage of 4.0V. Three actuators were installed on the three rotary joint of an index finger, and one actuator was installed on one proximal joint. Positions of each joint and finger tip were recorded on the video camera, and motion was analyzed. Power supply to the index finger actuators preceded power supply to the thumb actuator, and key pinching motion was accomplished in 180s. Tip pinching was accomplished in 135s as power supply to the thumb preceded power supply to the index finger.

• Journal of Chest Surgery
• /
• 제43권6호
• /
• pp.797-799
• /
• 2010

치과 시술 후 발생하는 종격동 기종은 비록 발생 비율이 낮고 예후가 양호하지만 잠재적으로 생명을 위협하는 합병증을 초래할 수도 있다. 저자들은 치과 치료 시에 고속 핸드피스에 의해 발생한 공기가 두경부 근막 공간을 통해 종격동까지 전파된 증례를 치험 하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.132-144
• /
• 2004

The purpose of this study was to evaluate alternatives for stable operation of WWTP(Wastewater Treatment Plant) with a higher rate of inflows and a higher concentration of pollutants during wet weather to minimize the pollution loads being discharged into receiving waters. 3Q(Q: dry weather flow) of a base flow is normally intercepted and flows into WWTP as it was current practice. It is revealed by simulation that the bypassing alternative of 1Q through secondary treatment and 2Q into the stream after primary treatment was as good as it is expected. The bypass pollution loads were in the range of 23.9 ~ 38.5 % of the total loads flowing into the WWTP indicating that the bypassed flows need an extra treatment such as stormwater detention reservoir, high-rate coagulation with sedimentation, and step-feed. The high-rate coagulation with sedimentation was the most effective with respect to removal of the pollution loads.

• Journal of Chest Surgery
• /
• 제24권5호
• /
• pp.463-469
• /
• 1991

Post-anastomotic leakage and stenoses remain major complications and are still responsible for many mortalities after esophageal reconstructive procedures. If the hand-suture is used, anastomotic leaks developed frequently than stenoses. But post-anastomotic leakages are more critical than post-anastomotic stenoses. If the stapler is used, anastomotic stenoses will develop frequently and not critical than anastomotic leakages. The stapler suture method is easier and quicker than the hand suture method in the esophageal anastomotic procedures. But the disadvantages of the stapler suture method is that there is not reachable site with anastomotic stapler the thoracic inlet region and the cost is expensive. We have treated 44 cases of the surgical complications after esophageal reconstructive procedure with conservative and surgical treatment for 10 years from January, 1980 to December, 1989. The anastomotic site stenoses were 8 cases in the hand-suture methods and 4 cases in the stapler-suture methods. The anastomotic leaks were 8 cases in hand-suture methods and 5 cases in stapler-suture methods. There were one death in the surgical repair of four post-operative anastomotic stenoses and two deaths in the surgical repair of three post-operative anastomotic leakages. Ever though we consider that there is more anastomotic leakage than stenoses after the hand-suture methods in esophageal reconstructive procedures. the cost with long stay in the intensive care unit to treat anastomotic leakage after the hand-suture, would be more expensive than-the cost of the treatment of the anastomotic stenoses after auto-suture.

• Journal of Chest Surgery
• /
• 제28권11호
• /
• pp.1025-1031
• /
• 1995

Thirty patients who underwent esophageal resections due to esophageal carcinoma and benign strictures, and esophagovisceral anastomoses were performed by hand suture in 11 patients[Group I and by using the end to end anastomosis[EEA stapler in 19 patients[Group II . Anastomoses were performed in the thoracic cavity in 24 patients[Right 19, Left 5 and in the cervical area in 6 patients. There was one operative mortality[3.3% in a cancer patient who underwent Ivor-Lewis operation using EEA stapler. She expired on POD 38 days due to renal failure and sepsis. There were two anastomotic leakage in the sutured group and no anastomotic leakage in the stapled group. Late anastomotic strictures occurred in 10 patients[52.6% in the stapled group compared to 2 patients[18.1% in the sutured group. Most of the patients with late anastomotic strictures responded to one or two trials of TTS dilations. Using EEA stapler in performing esophagovisceral anastomosis is a safe method with acceptable range of complication rate, and total admission period after the operation for group I was 30.3 days compared to 25.4 days in group II although it had no clinical significance. The follow up was possible in 23 patients; 5 patients in group I died within mean 12.6 months and 9 patients in group II within mean 14.2 months.

• 한국경영과학회지
• /
• 제39권3호
• /
• pp.51-61
• /
• 2014

In this paper, we deal with developing a cost estimation relationships (CER) for Korean maneuverable weapons systems using historical production cost. To develop the CER, we collected the historical data of the production cost of four tanks and five armored vehicles. We also analyzed the Required Operational Capability (ROC) of the weapons systems and chose cost drivers that can compare operational capabilities of the weapons systems We used Forward selection, Backward selection, Stepwise Regression and $R^2$ selection as the cost drivers which have the greatest influence with the dependent variables. And we used Principle Component Regression, Robust Regression and Weighted Regression to deal with multicollinearity and outlier among the data to develop a more appropriate CER. As a result, we were able to develop a production cost CER for Korean maneuverable weapons systems that have the lowest cost errors. Thus, this research is meaningful in terms of developing a CER based on Korean original cost data without foreign data and these methods will contribute to developing a Korean cost analysis program in the future.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.280-285
• /
• 1999

본 논문에서는 군용 통신의 목적과는 달리 의도적 또는 비의도적인 재밍(Jamming)현상 보다는 전파의 다경로 채널에서 수신 신호 포락선의 변동으로 인한 레이라이 페이딩이 있을 때 고속 주파수 도약(FFH) BFSK 시스템의 성능을 분석하였다. 다경로 페이딩 채널과 레이라이 페이딩을 이론적으로 정리하고 페이딩이 없을때와 있을 때 시스템의 성능을 알아보았다. 이 시스템에 경로 다이버시티를 적용하였을 때 약 20dB이상의 성능 개선이 이루어 짐을 알 수 있었다. 주파수 변조 방식이 DPSK일때와 비교하였다.

• 대한의용생체공학회:의공학회지
• /
• 제19권3호
• /
• pp.215-224
• /
• 1998

본 논문은 급성 간 부전 환자나 간이식 대기상태에 있는 환자에 이용하기 위한 체외 간 보조장치를 개발하기 위한 기초 실험에 관한 것이다. 밀도 33kg/m, 평균 직경 500um, 60-70%의 window를 가진 폴리우레탄 폼을 15% NCO-프리폴리머로 제조하였다. 폴리우레탄 폼에 접종된 간세포는 3일 후에 거의 모두 100-150um 크기의 구상체를 형성하였다. BSA 코팅을 한 폴리우레탄 폼은 BSA로 코팅하지 않은 폴리우레탄 폼보다 간세포 구상체 형성 시간이 더 짧았다. 폴리우레탄 폼에 형성된 간세포 구상체의 간 기능을 증명하기 위하여 암모니아 제거율과 요소 및 알부민 분비율을 측정하였다. 폴리우레탄 폼은 간세포 구상체 배양에 적합하며, 폴리우레탄 폼 내에서의 간세포 구상체 배양은 체외 간 보조장치로의 개발 가능성이 높다.