• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.937-947
• /
• 2003

A shoreline, which has no the water depth, moves continuously as waves rise up and recede. Therefore, a special boundary treatment is required to track properly the movements of the shoreline in numerical modeling of the behavior of tsunamis or tides near a coastal zone. In this study, convective terms in nonlinear shallow-water equations are discretized explicitly by using a second-order upwind scheme to describe a moving shoreline more accurately. An oscillatory flow motion in a circular paraboloidal basin has been employed to validate the performance of the developed numerical model. Computed results of instantaneous free surface displacements are compared with those of analytical solutions and existing numerical solutions. The run-up heights in the vicinity of a circular island have also been calculated and obtained numerical results have been shown against available laboratory measurements. A good agreement has been observed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.110-116
• /
• 2013

With the recent development of wireless network technologies, there have been increasing usage of variouse position base servies. Position based services basically collect position information of moving object for the utilization of them in real life. Accordingly, new index structures are required to efficiently retrieve the consecutive positions of moving objects. In the paper, we consider volume of Extended Minimum Bounding Rectangles(EMBR) to be determined by average size of range queries. We proposed the methode that split efficiently moving object with long distance between location, and split moving object for decrease searching space an Estimated-Split algorithm that minimizes the volume of MBRs is designed and simulated. Our experimental evaluation confirms the effectiveness and efficiency of our proposed splitting policy.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.427-439
• /
• 2006

The SBF (Simple Boundary Follower) is a boundary-following algorithm, and is used mainly for image recognition and presentation. The SBF is very popular because of its simplicity and efficiency in tracing the boundary of an object from an acquired binary image; however, it does have two drawbacks. First, the SBF cannot consistently process inner or inner-outer corners according to the follower's position and direction. Second, the SBF requires movement operations for the non-boundary pixels that are connected to boundary pixels. The MSBF (Modified Simple Boundary Follower) has a diagonal detour step for preventing inner-outer corner inconsistency, but is still inconsistent with inner-corners and still requires extra movement operations on non-boundary pixels. In this paper, we propose the ISBF (Improved Simple Boundary Follower), which solves the inconsistencies and reduces the extra operations. In addition, we have classified the tour maps by paths from a current boundary pixel to the next boundary pixel and have analyzed SBF, MSBF, and ISBF. We have determined that the ISBF has no inconsistency issues and reduces the overall number of operations.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.497-505
• /
• 2004

오늘날과 같이 산업사회의 급격한 발달로 인하여 토지의 재산적인 가치가 높게 평가되면서 국민들은 토지에 대한 정확하고 다양한 정보제공을 요구하고 있다. 그러나 우리나라는 토지조사사업으로 작성된 지적공부를 현재까지 사용하고 있으나 토지이동에 따른 지적경계의 변동과 지적도면이 변질되고, 신축과 훼손이 심해져서 지적도의 경계선과 지상경계선의 불일치로 토지분쟁을 유발하여 대국민관계에 불신을 초래하고 있는 것이 사실이다. 그러나 아직까지 정확한 해결방안을 찾지 못하고 있는 것이다. 그러므로 본 연구에서는 현행 지적공부의 문제점인 경계불부합을 효율적으로 정리할 수 있는 방안을 위해서 지상경계를 TS측량방법을 이용하여 필지별 면적과 경계점간 거리의 변화를 측정하여 도시지역과 농촌지역에 관한 도상 경계와 지상경계를 분석하여 문제점을 해결할 수 있는 방법으로 지상경계위주의 좌표로 등록하여 정리하는 것이 효율적인 방법임을 제시하였다.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.54-66
• /
• 2016

In this study, the absorbing boundary condition was adopted to prevent elastic wave propagation due to abrupt load condition changes in moving force analysis. It was proven to be effective in reducing inappropriate noise components. Furthermore, to verify whether fixed point excitation in a laboratory test can simulate train movement effectively, the results of dynamic analysis for fixed point excitation and moving force conditions were analyzed. The dynamic stability of an asphalt track structure under a KTX train condition was also studied. Additionally, the dynamic safety of asphalt tracks was verified by comparing the results of a moving force analysis under a KTX train load and a quasi-static analysis under the design standard Korean train load.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.61-68
• /
• 1991

The system such as railway bridge can be modelled as the restrained beam with intermediate supports. This kind of structures are subject to the moving load, which has a great effect on dynamic stresses and can cause sever motions, especially at high velocities. Therefore, to analyze the dynamic characteristics of the system due to the moving load is very important. In this paper, the governing equation of motion of a restrained beam subjected to the moving load is derived by using the Hamilton's principle. The orthogonal polynomial functions, which are trial functions and satisfying the geometric and dynamic boundary conditions, are obtained through simple procedure. The dynamic response of the system subjected to the moving loads is obtained by using the Galerkin's method and the numerical time integration technique. The numerical tests for various constraint, velocity and boundary conditions were preformed. Furthermore, the effects of mass of the moving load are studied in detail.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.103-113
• /
• 1996

Two-dimensional finite element hydrodynamic models for long wave simulation usually adopt fixed land boundary. However moving boundary treatment is strongly required in the simulation of tidal flats for west and south coast of Korea. In this study very efficient and realistic moving boundary treatment is applied by considering incident long wave surface slope. Developed STEP-CM (Superior Two-step Explicit Program for Coastal Modeling) ,shows numerically stable results in comparative study for idealized one-dimensional channel. Real application of the model is done for Chonsu Bay where tidal flats are distributed along the coast. Nonlinear tidal current and tidal flat effects are easily simulated in STEP-CM and resulting circulations are detected around headland of Wonsan Island.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.123-130
• /
• 2000

In this paper, we propose an extracting method of moving object contour using active contour model from image sequences acquired by fixed camera. We use an adaptive background model for robust processing in surrounding conditions. Object segmentation model detects pixels thresholded from local difference image between background and current image and extracts connected regions. Noises in boundary area of moving object we eliminated by morphological filter. The contour of segmented object is corrected by using active contour model for extracting accurate boundary of moving object. We apply the proposed method to highway image sequences and show the results of simulation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2019

The heat conduction problem with discontinuous material coefficients generally consists of the conservative equation, boundary condition, and interface condition, which should be additionally satisfied in the solution procedure. This feature often makes the development of new numerical schemes difficult as it induces a layered singularity in the solution fields; thus, a special approximation is required to capture the singular behavior. In addition to the approximation, the construction of a total system of equations is challenging. In this study, a wedge function is devised for enriching the approximation, and the interface condition itself is embedded in the moving least squares(MLS) derivative approximation to consistently satisfy the interface condition. The heat conduction problem is then discretized in a strong form using the developed derivative approximation, which is named as the interface immersed MLS difference method. This method is able to efficiently provide a numerical solution for such interface problems avoiding both numerical quadrature as well as extra difference equations related to the interface condition enforcement. Numerical experiments proved that the developed numerical method was highly accurate and computationally efficient at solving the heat conduction problem with interfacial jump as well as the problem with a geometrically induced interfacial singularity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.464-464
• /
• 2017

경사가 급한 산지하천은 대부분 전석이 산재한 자갈하상으로 되어 있다. 전석은 계곡이나 사면에서 발생한 토석류의 일부로 하천에 유입하여 하류로 이송되는 중에 하상에 퇴적된다. 이후 발생하는 홍수에 따라서 거대 전석은 단속적 이동하기 때문에 하천 흐름을 방해하는 돌출장애물로서 기능하는 경우가 많다. 본 연구에서는 개수로 흐름의 장애를 유발하는 돌출물이 경계층 높이에 어떤 영향을 미치는 지를 파악하기 위하여 장애물 돌출높이의 변화가 경계층고에 미치는 영향을 수리실험으로 조사하였다. 본 연구인 경계층분포 실험은 폭 0.6m, 길이 9m인 순환식 유량공급 개수로에서 진행하였으며 실제 경계층 측정 길이는 폭 0.6m, 최대 길이 1.2m, 수심 0.2m이다. 개수로에 돌출장애물을 부착 후 3차원 유속계를 이용하여 유속을 측정하였다. 유속계의 측정간격은 수로 방향, 폭 방향, 수심방향으로 각각 1cm씩 이동하며 유속 u, v, w를 측정하였으며 이때 흐름의 평균유속은 0.51m/s이다. 실험에 사용된 돌출 장애물의 크기는 가로와 세로는 6cm, 길이 6~10cm인 직육면체 콘크리트이다. 포설된 하상재료의 평균입경은 20.5mm의 강자갈이며 포설된 높이는 평균 20.5mm이다. 실험방법은 개수로 바닥에 돌출장애물을 부착 후 그 하류에서 수심, 유량, 유속, 수온을 측정한다. 또한 하상재료를 포설하고 위와 같은 방법으로 실험을 진행 후 결과를 비교, 분석한다. 본 연구는 결과를 정리하면, 동일한 높이의 돌출장애물이 있을 경우 개수로 유속분포는 자갈하상에서 기울기가 더 급하였다. 돌출 장애물에서 하류로 갈수록 무차원 경계층 두께는 감소하는 경향을 보였으나 자갈하상인 경우에는 진동을 나타내고 있어서 하상의 조도가 경계층 안정에 영향을 미치는 것으로 판단된다. 따라서 자갈하상과 같이 하상의 조도고가 클 때 경계층 변화에 미치는 기구를 파악하는 연구가 필요하다.