• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.586-589
• /
• 2017

The vibration monitoring system using the sensor network is used in various fields. However, in case of the vibration of the existing products, the size of the monitoring system is increased due to the separation of the sensor data collection function and the communication function. In this paper, we design and implement a lightweight vibration monitoring system using the MQTT protocol, which is oneM2M device standard protocol for the Arduino and Ethernet modules, to monitor frequent earthquakes and vibrations in narrow places.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.577-586
• /
• 2011

This paper describes the development of hardware simulator for the operation analysis of DC microgrid. The hardware simulator consists of several distributed power sources such as a wind power generation, solar power and fuel cell, and two energy storages such as a supercapacitor and battery. The main controller which performs a role of energy management and state monitoring is connected with the local controller in each power source and storage through ethernet-based communication link. The developed hardware simulator can be utilized to analyze the performance DC microgrid with practical manner.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.718-725
• /
• 2004

The real-time industrial network, often referred to as fieldbus, is an important element for intelligent manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But, the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet with cascade structure for industrial communications. More specifically, this paper presents an analytical performance evaluation of switched Ethernet with cascade structure, and a case study about networked control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1241-1248
• /
• 2006

In high reliability systems for industrial network such as railway signal system, fieldbus protocols have been known to satisfy the real-time and fault tolerant requirements. But, the application of fieldbus has been limited due to the high cost of hardware and software, and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet(IEEE 802.3), is being adapted to the industrial network. In this paper, we propose a switched Ethernet based railway signal system because of its very promising prospect for industrial application due to the elimination of uncertainties in the network operation. In addition, we propose the redundancy architecture for the reliability of network components. More specifically, this paper presents an analytical performance evaluation of switched Ethernet for railway signal system, and shows experimental evaluation of redundancy architecture.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2011

In this paper, the implementation of a production control system has been studied in order to obtain Realtime Cost Calculation using an exact Machine Factor and Man Factor based on RFID reader data transferred through network. For the study, microprocessor built in the controller of production facilities is used and also RFID reader is built additionally. Control part, card reader used for check the beginning and ending working time of workers, and Machine Factor and Man Factor calculated are transferred to server via PLC transmission port, serial transmission port, or Ethernet transmission port. By using the system, the production cost or the production efficiency is calculated exactly. Therefore it is possible to improve production rate and cost reduction by the use of the proposed production control system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1674-1680
• /
• 2009

This paper proposes an autonomous fault determination, fault zone isolation and fault restoration strategy based on the ethernet communication as a new attempt to solve the problem the of the existing central control method. In proposed method, The FRTU(Feeder Remote Terminal Unit)s on the feeder determines autonomously where the faulted zone is by exchanging the voltage and current information with neighbor FRTUs based on the network communication, and then separates the faulted zone in an nil-voltage status to make the protective device to reclose successively. In particular, the minimization of outage time and relational load balancing is archived by each interconnection switch which determines autonomously the load zone to be allocated among those zones after the sound outage zones was separated individually. Finally, to show effectiveness of the proposed fault restoration strategy, the several fault cases are simulated for the test distribution system, and the load balancing index of the proposed solution is compared with all of feasible solutions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.123-126
• /
• 2005

STP gets to have different network performance, depending on the configuration method of topology. Accordingly, for efficient network environment, it is necessary to make the optimum topology. This paper proposed a way to make the optimum topology for construction of efficient network among switches on ethernet: the optimum topology was made by calculating the time the switches in the same domain receive the frame transmitted from the root switch, using a mathematical model. And it analyzed the performance of the topology depending on the location of the root switch. As a result of analyzing the performance, this study came to the conclusion that it would be effective to locate the root switch in the center of the square network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.557-560
• /
• 2005

The purpose of this study is to realize DHCP server based on embedded system. To achieve this, embedded Linux was ported in ez Bord-M01 mounted with Intel Strong ARM SA1110 processor, and ethernet-based network was constructed for network function. In this way, this study suggests embedded DHCP server where Window and Linux client hosts are dynamically configurated as network information by dynamically assigning network information in embedded board.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.56-61
• /
• 2013

With the rapidly increasing power demand in recent years, variety of methods have been proposed for efficient power consumption.. Among them, the most representative example is demand response system based smart grid. Demand response system is not passive, one-side power demand. This system can efficiently consume through communication between service provider and power consumer. Demand response system uses HTTP based TCP/IP. And currently, there are variety of communication application protocol. In this paper, we analyze procotol type and application for demand response system.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.261-266
• /
• 2005

This paper proposes two systems. One is a Home Gateway(HG) which efficiently connects and controls digital appliances in the home network environments. The other is a Management Server(MS) that overcomes the physical limitation of the HG. The HG supports networking modules(TCP/IP for Ethernet, ADSL), home networking functions(HomePNA, IEEE1394 PLC) and telecommunication system(PSTN/SLT, VoIP, Video Communication). The HG is expected to be a core device for the integrated digital home environments. The MS is a dedicated server which manages and controls individual HG, home appliances and HA devices implemented at an area.