• The Journal of the Korean dental association
• /
• v.27 no.8 s.243
• /
• pp.735-745
• /
• 1989

• 대한치과보철학회:학술대회논문집
• /
• 2000.11a
• /
• pp.87-87
• /
• 2000

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.296-303
• /
• 2019

In edentulous patient, not only mastication and pronunciation but also esthetics are compromised. By restoring an edentulous patient with complete dentures, masticatory function and esthetics can be rehabilitated. The advantages of the dentures using CAD/CAM are that they can be reconstructed ubiquitously with stored data, and the strength and density of CAD/CAM material are clinically acceptable. In this clinical report, interocclusal record was taken in a conventional manner and then two lab processing procedures were performed: conventional method and CAD/CAM method. Two types of processing procedures were compared and evaluated. Fair clinical results were obtained in both ways, satisfying the patient.

• Journal of Convergence for Information Technology
• /
• v.10 no.3
• /
• pp.134-140
• /
• 2020

The aim of this research was to analyze the differences for the oral health status of the elderly people living in the long-term care facilities and the non-resident elderly. The study was conducted on 469 elderly people of the same age, gender and basic living conditions. Elderly residing in long-term care facilities had higher dental caries prevalence(p=0.019), DT(p=0.001), and MT(p=0.047) than non-resident elderly, and had lower FT(p<0.001) than non-resident elderly. The elderly living in facilities were 1.93 times more likely to be caries than non-residents, and 0.73 times more likely to have a filled tooth. The probability of denture use was 0.15 times for the maxillary and 0.13 times for the mandibular. The probability of denture needs was 5.61 times for the maxillary and 5.65 times for the mandibular. All of these results showed significant differences. As a result of this, it can be used as basic data for establishing oral health policy for oral health promotion of the elderly living in Long-term care facilities.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.311-318
• /
• 2017

Several types of attachments have been used for implant supported and/or retained overdentures. Locator is one of the stud type attachments and it has been generally used. However, the colored matrix is resilient and vulnerable to wear, so frequent post-insertion maintenance is needed. To solve this problem, it is necessary to introduce innovative attachment system. Overdentures using Air Gap attachment (AGA) has improved masticatory function and facial esthetics. AGA is made of metal, so it could be more resistant to wear or friction than the other resilient attachments. Nevertheless, AGA plays a role in stress breakers because it allows movement during denture movement with predetermined gap. In addition, both pre-existing implants and natural teeth were successfully used for connection of AGA. AGA could replace other unsplinted type of attachments. Overdentures using AGA could provide satisfactory result in terms of function, esthetics and retention. However, long term follow up is needed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.513-518
• /
• 2007

Loss of multiple teeth by multiple dental caries, traumatic influence or hereditable disease can cause many problem in children. Using removable appliance can be used for treatment of this problem. But conventional removable appliance has limits of retention by wire-clasp, non esthetic appearance, difficulty in pronunciation by its volume. Flexible denture using $Valplast^{(R)}$ system could be a excellent partial denture for restorarion in child because of various advantage such as retention from soft tissue, natural esthetic aspect, biocompatibility, durability to compare with conventional acrylic appliance. The present case report describe properties and consideration of flexible denture using Valplast $system^{(R)}$ in comparison with conventional acrylic appliance and report successful restoration of child using Valplast $system^{(R)}$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.2
• /
• pp.141-148
• /
• 2016

Recently computer-aided technology has been widely used in dentistry. DENTCA$^{TM}$ CAD/CAM denture system (DENTCA Inc.), one of CAD/CAM systems for fabricating complete denture, tries to collect and store all of a patient's information at the first visit. This system aims to deliver denture at the second visit through utilizing the CAD/CAM software to access the stored data for designing the 3D denture model. The 3 dimensional (3D) denture will then be fabricated with 3D printer. Many case reports have evaluated clinical application of CAD/CAM system for fabricating complete dentures. This case report is about fabricating of complete dentures using DENTCA system and conventional method in same patient. With two cases, usefulness and limitation of DENTCA system could be evaluated.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.490-494
• /
• 2019

Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.255-261
• /
• 2006

The purpose of This study was to survey the present state and prospect of geriatric denture prosthetic dentistry among community dental hygienists in Korea. Questionnaires about the present state and prospect of geriatric denture prosthetic dentistry were distributed to the community dental hygienists in Korea, July 2006. Collected questionnaires from 89 cases were analyzed. All collected data were analyzed using the SPSS program. The significance of differences among groups were assessed using chi-square test or Fisher's exact test. The results of this study were summarized as follows: The public relations of the geriatric denture prosthetic dentistry were enforced good, mainly by village offices. Appointed dental clinics made a production of full dentures connecting in Korean Dental Association. Above findings suggest that further study about the present state and prospect of geriatric denture prosthetic dentistry is necessary in improving the oral health related quality of life in elders.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.6-19
• /
• 2024

With the advancement of Computer-Aided Design/Computer-Aided Manufacturing (CAD-CAM) technology, fabrication of dentures using this technology has gained popularity. As one of CAD-CAM technologies, digital complete denture system has been introduced, which fabricates complete dentures using subtractive manufacturing of monolithic block containing both the color of a denture base and an artificial tooth. In this case, two pairs of upper and lower dentures were fabricated for two patients. Two pairs of complete dentures were fabricated for a 74-year-old male and a 73-year-old female respectively by conventional denture fabrication method and digital method of milling. To obtain a digital complete denture, monolithic block (Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein) was chosen for the materials to fabricate the digital complete dentures. An individual tray was designed using CAD software and manufactured by 3D printing technique. The final impression and interocclusal relationship were recorded using the fabricated individual tray. The final impression was scanned, and the complete denture design and try-in denture were 3D printed using CAD-CAM software. Subsequently, the monolithic block was milled, and the final dentures were fabricated and tried on patients. Previously mentioned two patient cases compared and analyzed stability, fit, speaking, mastication, aesthetics, and patient satisfaction of two pairs of dentures: one fabricated using CAD-CAM system and the other using traditional methods. This was performed to evaluate and report the findings from both denture-making approaches.