• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.619-625
• /
• 1998

The effect of softening point and glass amount of glass frit on the sintering behavior of low temperature cofirable glass/ceramic composites was studied and according to these results, glass/ceramic composites with high sintered density was fabricated. The density of composites was increased as the glass amount was increased. In case of using the glass with low softening point, the deformation of specimen was occurred though the ratio of the glass amount in the specimen was low. But, in case of using the glass with high softening point, the sintered density of composites was increased in accordance with glass amount. With the specimen of high softening point, the deformation was not happened. Therefore, it was found that the densification was progressed continuously in high glass amount. From the study on the effect of softening point of glass on sintering behavior, the suitable softening point and glass amount for fabrication of glass/ceramic composites can be anticipated. When glass frit with softening point of $790^{\circ}C$ was chosen according to this result, low temperature cofirable glass/ceramic composites with high density (97%) at $900^{\circ}C$ was fabricated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1657-1664
• /
• 1991

본 연구에서는 재료의 이방성을 고려한 점소성 모델을 제시하였다. 공학적 인 견지에서 볼 때 이방성 재료의 기계적 거동을 표한하기 위해서는 단순화 이론(si- mplified theory)의 개발이 필요하게 되었으며 이에따라 Betten은 등방성 소성 포텐셜 (isotropic plastic potential)에서 응력텐서를 재료의 이방성을 포함하는 변환 응력 텐서(mapped stress tensor)로 대체함으로써 이방성을 고려하였다. 그러므로 실제 이방성 재료의 비탄성 거동은 가상의 등방성 상태로 치환되며 여기에 소성 포텐셜 이 론을 적용하게 된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.213-213
• /
• 2003

저온소성 가능하며 저 융점유리인 고 투과율의 Pb-free 조성으로서 PDP(Plasma Display panel)의 투명유전체에 응용하고자 P$_2$O$_{5}$-ZnO-RO 계인 인산염 유리의 열적, 광학적성질을 연구하였다. 이 삼원계인 인산염유리계를 PDP의 투명 유전체에 응용하기에는 열적특성에서 문제점이 제기되어, (30-50)P$_2$O$_{5}$ - (20-50)ZnO - (15-45) RO (mol%)계에 유리망목형성제인 A1$_2$O$_3$, SiO$_2$, B$_2$O$_3$등을 첨가하여 열적성질 및 소성후 투광성 등을 조사하였다. 열적특성은 DTA와 TGA를 이용하여 유리전이점(Tg) 및 선팽 창계수(CTE)와 연하점(Ts) 을 측정하였으며, 투광성은 500-58$0^{\circ}C$에서 1시간동안 소성하여 UV-visible spectrometer을 이용하였다 그 결과로, 380-46$0^{\circ}C$의 Tg와 8-$10^{-6}$K의 CTE 및 70-80%의 광투과율을 나타내었다. 이러한 결과는 P$_2$O$_{5}$-ZnO-RO계는 PDP의 투명유전체에 적용하기에는 상당히 높거나 낮은 Tg를 형성하였지만 유리형성제를 수 mol%을 첨가함으로써 적절한 Tg점과 높은 투과율을 얻을 수 있었다.수 있었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.504-507
• /
• 2010

본 논문에서는 저온용 오스테나이트계 스테인리스강(ASS)의 온도 및 변형률 속도의 영향을 고려한 통합 구성 방정식 및 손상 모델을 제안하였다. 저온 영역에서, 304L ASS의 온도 및 변형률 속도별 인장 실험을 시행하였다. 그 결과, 변형 유기 마르텐사이트 상변태에 의해 상변태 유기 소성(TRIP)이 저온에서 현저히 나타났으며 온도 및 변형률 속도의 영향이 지대하였다. 실험 결과를 바탕으로 ASS의 저온 거동 및 특성을 규명하여 수치 모델에 반영하였다. 저온에서 일어나는 2차 경화 현상을 표현하기 위해, Bodner/Partom 점소성 구성 방정식을 수정하고 Tomita/Iwamoto 변형 유기 상변태 모델을 구성 방정식에 적용시켰다. 저온 연성 파단 현상을 표현하기 위해, Bodner/Chan 손상모델을 수정하여 접목시켰다. 제안된 모델을 유한요소 프로그램에 탑재시키고, 온도 및 변형률 속도 의존 재료 정수를 결정하였다. 저온 영역에서, 온도 및 변형률 속도별 재료 거동을 시뮬레이션하고 이를 실험 결과와 비교 및 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.190-200
• /
• 1991

Certain structural components are exposed to high temperatures. At high temperature, under thermal and mechanical loading, metal components exhibit both creep and plastic behavior. The unified constitutive theory is to model both the time-dependent behavior(creep) and the time-independent behavior(plasticity) in one set of equations. Microscopically both creep and plasticity are controlled by the motion of dislocations. A finite element method is presented encorporating a unified constitutive model for the transient analysis of viscoplastic behavior of structures exposed to high temperature.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.102-121
• /
• 2012

The purpose of this study is to verify homoteneity of soil and earthenwares and identify firing temperature of earthenwares excavated from Yeoncheon Hapsuri: two earthenwares of the New Stone Age(YCP-1, YCP-2); two of the Bronze Age(YCP-3, YCP-4); and four of the Three States Age(YCP-4~8). The comparative analysis of soil (YCRM) and the earthenwares displays that soil geochemical patterns were similar to YCP-1, YCP-3, YCP-5, YCP-6, YCP-7 and YCP-8. On the other hand, YCP-2 and YCP-4 did not show the similarity to the one of soil because they had been enriched with MgO by contained talc and chlorite. Based on the absorption rate, specific gravity, structural characteristics and XRD analysis, firing temperature has been estimated: for YCP-7 and YCP-8 was $870^{\circ}C$ or over; for YCP-2 and YCP-4 $800^{\circ}C$ or below; and for YCP-1, YCP-3, YCP-5 and YCP-6 between 800 and $870^{\circ}C$. Mineralogical analysis displays that the geochemical pattern of the soil is coincide with the one around Yeoncheon Hapsuri site, which also shows similarity to the one of earthenwares. Such result persuades that the excavated earthenwares were produced with the soils within the precinct of the archaeological sites.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.195-200
• /
• 2006

Laboratory creep experiments show that compaction of unconsolidated shale is an irrecoverable process caused by viscous time-dependent deformation. Using Perzyna's viscoplasticity framework combined with the modified Cam-clay theory, we found the constitutive equation expressed in the form of strain rate as a power law function of the ratio between the sizes of dynamic and static yield surfaces. We derived the volumetric creep strain at a constant hydrostatic pressure level as a logarithmic function of time, which is in good agreement with experimental results. The determined material constants indicate that the yield stress of the shale increases by 6% as strain rate rises by an order of magnitude. This demonstrates that the laboratory-based prediction of yield stress (and porosity) may result in a significant error in estimating the properties in situ.

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.135-145
• /
• 1999

Dynamic Shear modulus (G) is one of the imfortant dynamic soil properties to estimate the response of soil to dynamic loading. Problems in engineering geo1ogy practice the require the knowledge of soil properties subjected to dynamic loadings include soil-structure interaction during earthquakes, bomb blasts, construction operations, and mining. Although the dynamic shear modulus (G) is a time-dependent property, G change with time is often neglected. In this study, the effect of duration of confinement and its affecting factors (previous stress and strain, particle size and sustained pressure, and plasticity index) on the low-amplitude shear modulus ($G_{max}$) of soils are reviewed, and some empirical correlations based on mean particle diameter and plasticity index are proposed.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.181-186
• /
• 1997

석탄회의 재활용율을 높이고자 비가소성 원료인 석탄회를 첨가한 슬립 및 고형화 소지의 유동학적 고찰을 하였고, 이들을 이용하여 주입성형 후 소성한 시편의 물성들을 측정하였다. 석탄회가 50wt.%이상 대체된 슬립의 경우 해교 기구는 점토내 입자의 정전기적 반발력 보다는 석탄회에 포함된 cenosphere 입자표면의 물유리 흡착에 의한 steric stabilization에 의한 것으로 판단되었다. 응집된 슬립은 전형적인 thixotrophy 현상을 나타내는 반면 분산후 재응집된 슬립은 점도가 계속 증가하는 겔화현상을 나타내어 망목구조를 갖는 성형체를 제조할 수 있었다. 석탄회 대체율 50wt.%의 소성체에서 가장 우수한 물성치를 얻을 수 있었으며, 대체율 70wt.%까지의 주입성형이 가능하였다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.17-28
• /
• 1999

In order to analyze effects of strain rate on consolidation of natural clay, this paper presents a nonlinear elasto viscoplastic model in which viscoplastic behavior is modeled by a unique effective stress-strain-strain rate relationship (equation omitted). The predicted values using numerical analysis are compared with measured ones in several laboratory tests such as creep test, multistage load test, and relaxation test for Berthierville clay. It is possible to estimate consolidation behavior of natural clay with reasonable accuracy using the proposed nonlinear viscoplastic model.