• Title/Summary/Keyword: 의세종

Search Result 525, Processing Time 0.029 seconds

Evaluation of applicability of land surface model for Africa region (아프리카 지역에 대한 지표수문해석 모델 적용성 평가)

  • Kim, Seon-Ho;Bae, Deg-Hyo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.36-36
    • /
    • 2018
  • 세계 물 시장은 지속적으로 성장하고 있는 추세로 현대경제연구원에서는 연 평균 5.5%씩 성장할 것이라고 예측한 바 있다. 또한 국내 수자원 개발은 거의 포화 상태에 도달하여 수자원 기업들이 해외 수자원 산업진출을 다각적으로 추진하고 있으므로 해외 수자원 사업에 대한 관심이 더욱 커질 전망이다. 해외 수자원 산업에서 국내 기업이 어려움을 겪는 부분 중 하나는 타당성 조사로 개발도상국에서 좋은 품질의 기상 및 수문 관측 자료를 확보하는 것이 어렵기 때문이다. 국내 기업들이 진출한 주요 해외 시장은 아시아와 아프리카이며, 진출 사례가 많은 아시아 지역에는 비교적 기상 및 수문자료 확보가 용이하나, 아프리카 지역은 자료의 확보가 어려운 상황이다. 특히 아프리카 지역은 수자원 현황이 열악하고 개발가능성이 높아 향후 국내 기업의 진출이 활발할 것으로 예측되는 지역으로 수자원 산업 진출을 위한 기상 및 수문자료 확보를 위한 노력이 필요하다. 본 연구에서는 해외 수자원 산업 진출의 기초자료 확보를 위해 아프리카 지역의 기상, 지형, 토양자료를 수집하고 수문자료 생산을 위한 지표수문해석 모델의 적용성을 평가하였다. 지표수문해석 모델로는 국내외에서 전지구 규모 수문해석에 활용성이 높다고 알려진 VIC (Variable Infiltiration Capacity)를 활용하였으며, 물수지 모의를 수행하였다. 기상, 지형, 토양자료는 미국 CPC (Climate Prediction Center), UMD(University of Maryland), FAO (Food and Agriculture Organization)의 전 지구 자료를 활용하였다. 아프리카 주요 유역에 대한 VIC 모델 적용성 평가결과 유출해석의 정확도가 유의미한 것으로 나타났다. 본 연구에서는 아프리카 대륙 규모의 기상, 지형, 토양자료를 확보하고 수문자료 생산 체계를 구축하였으며, 연구결과가 향후 국내 수자원 기업의 해외진출 및 전 지구 규모 수문연구의 기초자료로 활용될 수 있다는 점에서 가치가 있다.

  • PDF

Projection and Analysis of Future Temperature and Precipitation in East Asia Region Using RCP Climate Change Scenario (RCP 기반 동아시아 지역의 미래 기온 및 강수량 변화 분석)

  • Lee, Moon-Hwan;Bae, Deg-Hyo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.578-578
    • /
    • 2015
  • 동아시아 지역의 대부분은 몬순의 영향으로 인해 수자원의 계절적 변동성이 크며 이로 인해 홍수 및 가뭄이 빈번하게 발생하고 있다. 기후변화에 따른 기온과 강수량의 변화는 수자원의 변동성을 더욱 악화시킬 수 있으며, 수재해 피해를 더욱 가중시킬 것으로 전망되고 있다. 본 연구에서는 기후변화에 따른 동아시아 지역의 기온 및 강수량의 변화를 전망하고, 그 특성을 분석하고자 한다. 이를 위해 CMIP5의 핵심실험인 2개 RCP시나리오(RCP4.5, RCP8.5)에 대한 다수의 GCMs 결과를 이용하였다. 구축한 기후시나리오를 이중선형보간법(bilinear interpolation)을 이용하여 공간적으로 상세화하였으며, Delta method를 이용하여 편의보정을 수행하였다. GCM 모의자료의 편의를 산정하기 위해 관측자료는 APHRODITE의 기온 및 강수량 자료를 이용하였다. GCM에 따라 차이가 나지만, 우리나라의 경우 평균적으로 100~300mm 정도 과소모의 되는 것으로 나타났다. 미래 기온 및 강수량 전망을 위해 과거기간은 1976~2005년, 미래기간은 2021~2050년(2040s), 2061~2090년(2070s)으로 구분하였다. 우리나라의 경우 RCP 4.5 하에서 연평균기온은 $1.4{\sim}1.7^{\circ}C$(2040s), $2.2{\sim}3.4^{\circ}C$(2070s) 정도 상승할 것으로 나타났으며, 연평균 강수량은 4.6~5.3% (2040s), 8.4~10.5% (2070s) 정도 증가할 것으로 나타났다. RCP 8.5에서는 연평균 기온은 RCP4.5에 비해 상승폭이 더 컸으며, 강수량은 유사한 결과가 나타났다. 또한, 동아시아 지역에서도 연평균 기온이 상승하고 연평균 강수량은 증가하는 것으로 나타났다. 다만, 지역별로 계절별 기온 및 강수량이 매우 다른 양상으로 나타났다. 이는 동아시아 지역과 같이 계절별 강수량 발생패턴이 다른 지역에서는 홍수 및 가뭄에 매우 중요한 역할을 할 것이다. 따라서 지역적으로 계절별 강수량의 변화를 분석해야 할 것으로 판단되며, 추후 유출량 모의를 기반으로 홍수 및 가뭄의 영향을 직접적으로 분석해야할 것으로 판단된다.

  • PDF

A study on the excavation rate of directional drilling using finite element method (유한요소법을 이용한 방향성 시추의 굴진율 연구)

  • Jung, Tae Joon;Shin, Younggy
    • Plant Journal
    • /
    • v.17 no.3
    • /
    • pp.42-46
    • /
    • 2021
  • The equation of motion of the drill string along the excavation trajectory was analyzed using the Lagrangian approach together with the finite element method (FEM). A drill string of circular cross section is constructed by combining a plurality of circular axes each having 12 degrees of freedom (DOF). FEM analysis can observe the vibration and dynamic changes of the entire drill string, and it is easy to apply comprehensive boundary conditions to reproduce the simulation of a realistic drill string. In this study, the constructed FEM motel was simulated. In order to apply the FEM program to the actual drill trajectory, the dynamic analysis of the curved beam was verified by comparison with the actual values. The dynamic change over time was observed.

Data Availability Zone for backup system in Cloud computing service (클라우드 컴퓨팅 서비스 백업을 위한 데이터 가용영역 방법론)

  • Park, Young-ho;Park, Yongsuk
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2014.10a
    • /
    • pp.366-369
    • /
    • 2014
  • Recently been viewed as a core technology of the IT industry, cloud computing services. It is expected that the market for cloud services industry showed a growth rate of 18.9% annually, to form a scale of $ 1,330 billion dollars in 2013, and to form a 1,768 billion dollars in 2015. Growth of cloud computing services industry, provides the operational efficiency and reduce costs for many companies, but the risks associated with it is also increasing. There is a problem that phenomenon is to lose control of the data on features of the cloud service, more data is gathered in one place, when a failure occurs, it is removed simultaneously the data of all devices. therefore, in the present paper is investigate the area a quick recovery with up to the problem and secure data storage INT the cloud computing service is available in only the data in the cloud service possible.

  • PDF

Faster MapToPoint over $F_{3^m}$ for Pairing-based Cryptosystems (페어링 암호 시스템을 위한 $F_{3^m}$에서의 효율적인 MapToPoint 방법)

  • Park, Young-Ho;Cho, Young-In;Chang, Nam-Su
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.21 no.6
    • /
    • pp.3-12
    • /
    • 2011
  • A hashing function that maps arbitrary messages directly onto curve points (MapToPoint) has non-negligible complexity in pairing-based cryptosystems. Unlike elliptic curve cryptosystems, pairing-based cryptosystems require the hashing function in ternary fields. Barreto et al. observed that it is more advantageous to hash the message to an ordinate instead of an abscissa. So, they significantly improved the hashing function by using a matrix with coefficients of the abscissa. In this paper, we improve the method of Barreto et al. by reducing the matrix. Our method requires only 44% memory of the previous result. Moreover we can hash a message onto a curve point 2~3 times faster than Barreto's Method.

Design Requirement Analysis and Configuration Proposal of a Vertiport for Domestic Applications of the Urban Air Mobility (도심항공 모빌리티(UAM)의 국내 적용을 위한 수직이착륙장 설계 요구조건 분석 및 형상 제안)

  • Ahn, Byeong-Seon;Hwang, Ho-Yon
    • Journal of Advanced Navigation Technology
    • /
    • v.25 no.1
    • /
    • pp.40-51
    • /
    • 2021
  • In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

Prediction of Percolation Threshold for Electrical Conductivity of CNT-Reinforced Cement Paste (CNT 보강 시멘트 페이스트의 전기전도에 관한 침투임계점 예측)

  • Lee, Seon Yeol;Kim, Dong Joo
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.10 no.3
    • /
    • pp.235-242
    • /
    • 2022
  • The percolation threshold of the CNT-reinforced cement paste is closely related to the optimal CNT amount to maximize the sensing ability of self-sensing concrete. However, the percolation threshold has various values depending on the cement, CNT, and water-to-cement ratio used. In this study, a percolation simulation model was proposed to predict the percolation threshold of the CNT-reinforced cement paste. The proposed model can simulate the percolation according to the amount of CNT using only the properties of CNT and cement, and for this, the concept of the number of aggregated CNT particles was used. The percolation simulation consists of forming a pre-hydrated cement paste model, random dispersion of CNTs, and percolation investigation. The simulation used CNT-reinforced cement paste with a water-cement ratio of 0.4 to 0.6, and the simulated percolation threshold point showed high accuracy with a simulation residual ratio of up to 7.5 % compared to the literature results.

Prediction of rainfall-induced runoff considering infiltration of water in both unsaturated and saturated porous media (불포화 및 포화 투수층에서의 침투를 고려하여 강우 유출 해석)

  • Changhoon Lee;Minh Thang Tran
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.62-62
    • /
    • 2023
  • 강우가 지표면 아래로 침투할 때 초기에는 투수층이 불포화 상태이어서 부압이 작용하면서 침투할 것이다. Richards 식(Richards, 1931)을 써서 불포화 투수층의 침투를 모의할 수 있다. 강우가 지속되는 동안 하상 아래 어느 구간은 포화 상태가 되어 Richards 식을 더 이상 사용할 수 없다. 하지만 현재까지의 연구는 Richards 식을 사용하여 침투를 모의하는 오류를 범하고 있다. 강우에 의한 침투를 예측할 때 지표면에서의 침투율 qb 가 필요한 데 현존하는 연구에서는 Horton 식(Horton, 1941)을 사용하여 초기 침투율 fo 와 장시간 후 침투율 fc 와 시간에 따라 지수함수로 감소하는 계수 k 의 3가지 계수값을 실험이나 현장 관측값에서 찾아서 쓰고 있다. 그런데, 이 계수값은 강우강도 ri 가 클수록 침투율 q 가 커지는 물리 현상을 반영하지 못하는 한계가 있다. 본 연구에서 먼저 포화 투수층에서의 침투를 모의하는 식을 개발하였다. 지표면 아래에서 불포화 투수층에는 Richards식을 사용하고 포화 투수층에는 개발한 식을 사용하여 침투를 모의하였다. 또한 지표면에서의 침투율 qb 를 구하는 공식을 개발하였다. 하상에서의 침투율의 최대값은 $q_{bmax}=-{\lambda}{\sqrt{2g(s-b)}}$ 일 것이다. 여기서 λ 는 투수층의 공극율, s 는 유출수면의 위치, b 는 지표면의 위치이다. 지표면에서의 침투율의 최소값 qbmin 은 지표면 바로 아래 지점에서의 침투율일 것이다. 지표면에서의 침투율 qb 로 qbmax 와 qbmin 사이의 적절한 값을 선택한다. 강우강도를 ri 라고 하면 지표면 위 유출수의 연속방정식은 다음과 같다: $s-b={\int}(r_i-{\mid}q_b{\mid})dt$. 즉, 유출수면의 위치 s 는 강우강도 ri 가 클수록 또는 지표면에서의 유출율의 크기 |qb| 가 작을수록 크다. 또한 지표면에서의 침투율 qb 와 지표면 아래에서의 침투율 q 는 s - b 가 클수록 크다. 따라서, 강우강도 ri 가 클수록 침투율 qb, q 가 큰 현상이 잘 반영되었다. 강우-침투-유출 모형실험을 수행하여 강우강도에 따라 침투율과 유출량이 다른 현상을 관측하여 수치실험 결과와 비교·검증하였다.

  • PDF

Assessment of Controlled Low Strength Material using Pond Ash for Pipe Backfill Materials (매립석탄재 활용 CLSM의 관 뒤채움재 적용성 평가)

  • Young-Wook Kim;Young-Cheol Lim;Doo-Bong Yeon
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.11 no.1
    • /
    • pp.32-38
    • /
    • 2023
  • In this study, as part of the practical development of technology for CLSM using pond ash, the characteristics such as flowability, bleeding rate, and strength of the CLSM according to physical properties such as particle size distribution and particulate content of the pond ash were reviewed. As a result of analyzing the properties of the collected pond ash, it was found that the characteristics of density and particle size distribution were different. As a result of evaluating the characteristics of the CLSM for three types of pond ash, it was found that the blending conditions to satisfy the quality stipulated in ACI 229R were different, and mainly affected the particle size distribution characteristics and particulate content of the pond ash. In case of coarse-grained pond ash (PA-3), mixing conditions that satisfy the performance requirements stipulated in ACI 229R were not derived. But it is considered that further review is necessary according to particle size adjustment.

The Study of Removal of Organic Matter by the Rockworm, Marphysa sanguinea (바위털갯지렁이, Marphysa sanguinea에 의한 유기물 제거에 관한 연구)

  • Baek, Ami;Lee, Kyoung Seon
    • Journal of Marine Life Science
    • /
    • v.3 no.1
    • /
    • pp.38-43
    • /
    • 2018
  • The polychaetes are the dominant species in the benthic communities, and play an important role in improving the sediment quality through the action of ingesting organic materials. We evaluated the improvement ability of rockworm Marphysa sanguinea for the removal of organic matter. We used the three types of sediment (S1: coarse sand, S2: fine sand, S3: muddy sand), and analyzed TOC of seawater and sediment. Rockworm was effective in eliminating organic matter in the three types of sediment and the larger the particle, the higher the removal rate. Removal ability of rockworm for organic matter in sediment were calculated with 3.9856 ppm g-1d-1 in coarse sand, 2.8021 ppm g-1d-1 in fine sand, and 28.1142 ppm g-1d-1 in muddy sand. The results show that rockworm contributes to the removal of organic matter in the various sediment types.