This study surveys preferred style and fit problems according to stature groups like short, medium, and tall to offer information to upgrade the clothing fit and satisfaction for each stature group. For this purpose, the questionnaire was accomplished, and the respondents were 18-59 year old women divided into 3 stature groups. The 6 questions were: (1) the preferred clothing style for 3 stature groups, (2) the conformity of stature designation on ready-made clothing, (3) frequency of restrictions on clothing design selection because of short or tall stature, (4) the important part to decide a good fit for a jacket, blouse, slacks, and skirt, (5) dissatisfaction with clothing fit and frequency of mending, and (6) mended part for a correct fit. They were analyzed according to 3 stature groups and the differences among 3 stature groups were found on them. For example, short women preferred short jackets; however, tall women preferred a long length. Short women experienced more restrictions on clothing design (or length) selection because a short stature. Hip girth was more important to decide a good fit for tall women versus short or medium women. Armhole and slacks width from crotch to knee were important parts to decide a good fit for short women. The study results should be applied to clothing design (or pattern making) in order to upgrade clothing fit and satisfaction for each stature group.
The purpose of this study is investigate the feature of the body shape of obese males and to propose a new apparel sizing system considering the body size of obese men through an the analysis of the body measurement of obese men in their twenties as reported in the 'Fifth Korean National Physical Standard Reports'. For this study, a new apparel sizing system for casual wear was proposed for obese men in their twenties after a body measurement of 159 obese men in their 20s with a BMI of 25 and over as reported in the 'Fifth Korean National Physical Standard Reports' conducted by SIZEKOREA. This study sought to investigate the features of obese men's bodies by comparing the body shape between obese men and ordinary men. The result of shows that width, depth and circumference items influencing the width size when producing clothes are larger in the case of an obese body shape than an ordinary body shape, and that the stature, total length, arm length and outside leg length influencing the length size are similar between an obese body shape and an ordinary body shape. Therefore, it was confirmed that an apparel sizing system specializing in clothes for obese customers is required. As a result of this study of the features of body shape, the control dimensions for such an apparel sizing system were determined to be the stature and chest circumference of upper garments and the stature and waist circumference(omphalion) for lower garments. The interval between the sizes was 5cm for the stature and was irregular for the chest and waste circumference. Consequently, 8 sizes were proposed for upper garments and 9 sizes were proposed for lower garments.
In the women's clothing industry that targets middle aged-women, there is increased interest on middle-aged women and their appearance management and diet. It is believed that the body type of middle-aged women is becoming thinner. This study examines if middle-aged women body types have changed based on data from the $5^{th}$ and $6^{th}$ Size Korea that objectively analyzed the aspects of middle-aged women's body size change and the related fashion industry that recognize changes in middle-aged women body types by suggesting foundational data for clothing designs. According to research results, middle-aged women's body type shows an increase in items related to height and that measurement values related to obesity (such as weight and BMI index) tend to decrease. Height has increased and weight has decreased compared to the past. Most items related to width or depth tend to show decreased values and we can assume that the present middle-aged women's body type is changing more dynamically than before. It will be possible to design proper clothes for consumer body type and trends if we design clothes that afford multilateral attention to the patterns, design, or material in clothing design by applying the aspects of middle-aged women's body size and body type change.
The purpose of the study is to survey the current state of tween generation boys' clothing-wearing, to identify problems in the current apparel sizing system, and to contribute to the improvement of the fitness of ready-made clothes. 1. According to the result of surveying the current state of clothing-wearing, boys prefer casual wear and, as they grow old, they tend to purchase clothes alone or in company with their friends. In addition, they use mainly easy casual wear or sports wear stores. They appear to be highly dissatisfied with price and size and think that the fitting of coats, pants and jackets is poor. Moreover, they complain about sizes such as waist circumference, pants length and upper-arm circumference. 2. According to the result of comparing apparel sizing system with body measurements, the waist circumference and hip circumference of young casual wear are fit to the large size of body at the age of 12 and the over-average size of body at the age of 13 and 14, but its bust circumference is fit only to the extra-large size of body at the age of 13 and 14. Such results come from differences in body shape between adults and adolescents. Although adolescents' body size has been enlarged, their body line is still immature and, accordingly, their drop-value is smaller than that of adults, which appears to cause adolescents to be highly dissatisfied with fitting.
본 연구에서는 3차원 시뮬레이션 프로그램으로 40-50대 중년남성의 보디스 원형을 제작한 후 가상착의로 외관평가 및 공극률, 단면도, 색분포도 등을 분석하여 패턴 간의 차이를 비교 분석해 봄으로써 중년남성에게 적합한 보디스 패턴 제도 방법을 선정하고자 하였다. 이를 통하여 중년남성용 의복을 제작 생산하는 업체에 패턴 개발에 필요한 기초자료를 제공하고자 하였다. 보디스 원형 분석 결과, J패턴이 중년남성의 체형에 가장 적합한 보디스 패턴으로 분석되었다. E패턴은 너무 여유가 없고, L패턴과 N패턴은 여유가 너무 많은 것으로 평가되었다. 그러나 J패턴도 등길이와 앞중심길이의 설정에 있어서 수정이 요구되었다. 등이 앞으로 굽고 어깨도 앞으로 기우는 노화현상에 따라 앞뒤길이 및 어깨각도, 어깨길이 치수의 조정이 요구되었다. 향후 J패턴을 수정하여 연구용 패턴을 제작한 후, 중년남성에 대한 실제 착의실험을 통한 중년남성용 보디스 원형개발이 이루어져야 할 것으로 생각된다.
This study purposed to analyze differences in body measurement between the 2D direct body measuring method and the 3D body scan measuring method and to perform the appearance evaluation and cross-sectional evaluation of the fit of pants to which body measurements obtained by each measuring method were applied. Body measuring was conducted in 10 women in their 20s-30s using 2D direct body measuring and 3D automatic measuring with Hamamatsu body scanner. Among the 10 women, 3 participated in experimental garment wearing. Experimental pants were made using their 2D direct body measurements and 3D automatic measurements, and wearing tests were performed through expert evaluation and cross-sectional evaluation. The results of the experiment were as follows. According to the results of comparative analysis on differences between 2D direct body measurements and 3D scan measurements, 3D automatic measurements were significantly larger in bust circumference, ankle circumference, armscye circumference, shoulder length, scye depth, and arm length. As circumferences measured with the 3D body scanner were somewhat larger than directly measured ones, it is suggested to adjust ease when using existing pattern making methods. We prepared experimental garments by the same pattern making method through applying body measurements obtained with the two measuring methods, and assessed the fit of the garment comparatively through expert evaluation and 3D scan cross-sectional evaluation. According to the results, 2D-pants using 2D direct body measurements was slightly tighter than 3D-pants using 3D measurements in waist circumference, hip circumference, and abdominal circumference. In the results of comparing appearance in terms of the fit of the experimental garment in each subject, significant difference was observed in most of the compared items. This result suggests that 3D automatic body measuring data may show different accuracy according to body shape and therefore it is necessary to examine difference between 2D direct body measurements and 3D automatic measurements according to body shape.
항공기의 플러터 현상을 예방키 위한 개발시의 주요 공학적 임무로는 플러 터 해석, 풍동 플러터 시험, 실기체에 대한 지상진동시험 및 비행 플러터 시 험이 있다. 이들 업무는 군용 항공기의 경우에는 군사 규격서, 민간 항공기 의 경우는 FAR 규정 등에 항공기 개발 및 개조시에는 필히 수행토록 명시 되어 있으며, 특히 개발항공기의 인증을 받기 위해서는 초도 비행전까지 필 수적으로 완료되어야 하는 업무이다. 이중 항공기 지상진동시험은 개발항공 기의 초도 비행전에 실기체를 대상으로 하는 구조 동특성 규명시험으로써 플러터 해석 모델의 정확도를 입증하고 그 해석모델을 수정하거나 개선시키 는데 필요한 구조의 동특성 변수들을 실험적으로 규명하는 시험이다. 이 시 험은 개발된 항공기의 초도비행허가를 획득하고 비행속도제한을 설정키 위 해서 초도비행 직전에 초도 개발 비행기를 대상으로 필수적으로 수행되어야 하는 필수적 시험이다. 이에 따라 개발된 항공기의 전기체 지상진동시험을 수행하였고, 시험데이터의 모달해석을 하였다. 이 시험을 수행하기 위해 3개 의 가진기를 사용하였고, 모두 159개의 지점에서 주파수응답 함수를 얻었다. 최대 48 채널의 데이터 획득시스템을 사용하였으므로, 네번에 걸쳐 측정위치 를 옮겨 전체데이타를 획득하였다. 지상진동 시험의 최종해석 결과는 유한요 소 모델의 유효성을 검토하는데 사용되었고, 시험 데이타를 이용한 가진응답 해석(Forced Response Analysis)을 통하여 비행플러터 시험시에 사용되는 플러터 가진기의 위치선정 및 가진력의 크기를 결정하는데 이용하였다.ncy)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스
요통(Lowback Pain)을 유발하는 주요원인으로 알려져있는 MMH(Manual Materials Handling) 작업에 있어서 작업조건의 변화가 근육의 활동과 피로도에 미치는 영향을 평가하기 위해 4가지 서로 다른 작업조건하에서 몸통부위(Trunk)의 주요근육에 대한 EMG 파형분석을 실시 하였다. 본 연구에서의 분석대항작업은 실제 작업조건과 유사하레 설계된 120분간의 단속적인 인양(Lifting)/하역(Lowering) 작업으로서 작업중량은 작업자의 MVIS(Maximum Voluntary Isometric Strength)를 기준으로 설정되었으며, 매 10분 간격으로 EMG 측정이 이루어졌다. 작업물이 작업자의 정면에 위치한 대칭형(Symmetric) 작업의 경우 배면부(Dorsal) 근육인 천극근(Erector Spinae)과 활배근(Latissimus Dorsi)이 활동근(Active Muscle)인 것으로 나타났으며, 정중면(Medial Plane)을 중심으로 좌우측 근육이 동일한 근력을 발휘하였다. 작업물이 작업자의 한쪽 측면에 위치한 90도 비대칭형(Asymmetric) 작업의 경우 천극근과 활배근외에 작업물과 반대쪽 외사근(External Oblique)이 활동근으로 추가되었으며, 작업물과 반대쪽의 근육들이 더욱 큰 근력을 발휘하였다. 작업의 반복에 따른 근육의 피로도를 평가하기 위해 실시한 EMG 파형의 Spectral Analysis 결과, 비대칭형 작업시 작업물과 반대쪽의 천극근에서 작업시간의 경과에 따라 중위주파수(Median Power Frequency)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를
현대의 패션의 다양화, 개성화로 패션 스타일을 구현하는데 있어서 모자는 더욱 부각되어 수요자 층이 확대되고 있지만, 다양한 재료와 형태로 세탁 및 관리에 어려움을 갖는다. 이에 본 연구는 모자제품의 관리방법에 대한 소비자의 현황을 조사, 분석함으로써 모자 레이블 부착의 문제점과 개선책 방안을 모색해 보고자 하며, 나아가 모자의 보관이나 세탁방법에 대한 정확하고 충분한 정보를 제공함으로써 제품을 오랫동안 유지할 수 있게 하고자 한다. 소비자들의 모자제품의 세탁 및 관리행동에 관한 조사를 하기 위하여 서울 및 도시에 거주하며 모자를 소유하고 있는 20대, 30대, 40대, 50대 이상의 남녀 395명을 대상으로 연령과 성별을 고려한 할당 표본추출방법을 통하여 설문지 조사를 실시하였다. 조사기간은 2007년 3월에서 4월까지 이루어 졌으며, 설문은 총 42문항으로 구성되었다. 모자 착용실태, 세탁방법, 건조방법, 보관방법에 관한 문항은 선다형으로, 모자 소비자 불만, 소비자 모자 레이블 인식에 관한 문항은 5점 리커트 척도로 측정하고, 자료분석을 위하여 SPSS 12.0 프로그램으로 빈도, 백분율, 평균, 표준오차, 교차분석, t-test, 일원분산분석 통계처리를 하였다. 그 결과에 의하면 첫째, 모자 소비자의 세탁방법 인식도와 실천정도는 보통 수준으로 나타났다. 남성보다는 세탁경험이 많은 여성이 모자 세탁 방법에 대하여 잘 알고 실천하고 있었으며, 편안함을 추구하는 젊은 세대보다 높은 연령대가 세탁방법을 더 잘 실천하는 것으로 조사되었다. 둘째, 모자 소비자들은 다른 의복 아이템과 비교하여 울세제로 세탁망에 넣어 세탁기로 돌리거나 손으로 직접 빠는 세심한 관리를 하는 경우가 많았다. 세탁빈도는 더러움이 탈 때마다 하는 것으로 조사되었으며, 세탁의 주 목적은 얼룩제거로 나타났지만, 여성은 남성에 비해 모자의 형태보전과 냄새제거를 중요한 요인으로 평가하는 것으로 나타났다. 건조장소에 있어서는 그늘에서 건조한다는 응답이 가장 많았고 대부분 집게로 집어 빨래 줄에 말리는 경우가 많았다. 모자 세탁 시 세탁방법, 건조방법, 건조장소의 요인들보다 세제종류가 세탁 후 변형에 영향을 미치는 것으로 조사되어 적절한 세제를 사용할 수 있는 정보를 소비자에게 인지시켜 피해를 줄이는데 노력하여야 할 것이다. 또 보관방법으로는 대부분 옷장 선반에 두고 있었으며 보관 후 형태변화 결과를 경험한 소비자의 비율이 높은 것으로 보아 적합한 모자 보관으로 형태유지에 각별한 주의가 요구된다. 셋째, 대부분의 모자 소비자들은 레이블에 대한 중요성을 인지하고 있으나 다른 의복 아이템에 비하여 모자레이블에 대한 신뢰도는 더 낮게 나타나, 공급자들은 정확하고 실질적인 레이블을 표기하여 신뢰도 회복을 기해야 할 것이다. 많은 소비자들이 모자의 치수 체계 이해에 어려움을 갖고 있으며, 특히 남성의 경우 레이블에 대한 전반적인 인지도가 낮게 나타나 남성 소비자에게도 전반적인 레이블에 대해 교육시키도록 구체적인 노력이 이루어져야만 하겠다. 후속연구에서는 모자의 다양한 형태나 재료에 따른 세탁 및 관리 방법을 보완하여 연구가 수행되어서 보다 구체적인 자료가 제공되어야 할 것으로 보인다.
미혼여성과 기혼여성을 대상으로 인체계측을 실시하여 직접 계측치와 지수치를 이용하여 주축요인분석을 한 결과 도출된 인자를 독립변수로 군집분석을 한 하반신 체형변인과 직물에 의한 플레어 스커트의 외관형상을 분석하기 위하여 영상처리를 이용하여 착용실험을 한 결괴는 다음과 같다. 1. 플레어 스커트의 헴라인 단면형상 분석 결과 체형변인에 의한 플레어 스커트의 드레이프 면적과 드레이프 계수는 드레이프의 면적이 크면 드레이프 계수도 큰 값을 나타내었다. 직물의 노드수는 드레이프성이 좋을수록 많이 형성되고 노드수가 많으면 노드지수 값은 작은 값을 가진다. 노드지수 값이 크면 노드의 고저가 균일하게 나타나고 작으면 노드의 고저가 불균일하게 나타난다. 또한 인체 측정치수의 허리둘레와 엉덩이둘레의 차이, 허리너비와 엉덩이너비의 차이 값이 큰 마름모형 체형변인에서 노드수는 많이 나타나고 노드지수 값은 작게 나타났다. 통형에 가까운 체형변인은 노드지수가 큰 값을 나타내므로 노드의 고저가 균일하게 나타났다. 직물의 노드수가 많으면 노드산 평균은 낮고, 노드지수 값이 큰 반면 노드수가 작으면 노드산펑균이 높으므로 노드산과 곡의 고저가 심하게 나타났다. 그러므로 직물의 드레이프성이 우수하다 할지라도 적정의 중량을 가지지 않으면 노드가 불균일하게 형성되어 의복 외관의 좋은 외관형상을 형성하지 못하는 결점이 나타나는 것으로 해석되었다. 2. 플레어 스커트의 헴라인 단면의 최대횡경은 인체측정값의 너비항목과 최대종경은 두께항목과 관련성이 높은 것으로 나타났다. 단면비의 값이 크면 최대횡경의 값이 크고 최대종경의 값이 작은 타원형에 가까운 단면형상이 나타나고, 단면비의 값이 작으면 최대횡경 값이 작고 최대총경 값이 큰 원형에 가까운 단변형상으로 나타났다. 3. 플레어 스커트의 외관형상 분석 결과 정면처짐분은 둘레항목, 너비항목 시아항목의 차이 값이 작을수록, 직물의 드레이프성이 좋을수록 크게 나타났다. 미혼여성과 기혼여성을 비교해 보면 기혼여성의 체형이 너비, 둘레항목사이의 치어 값이 적기 때문에 처짐분이 크게 나타났다. 측면처짐분은 인체측정값의 두께항목과 상관이 깊어 앞부분은 배두께가 클수록, 뒷부분은 엉덩이두께가 클수록 처짐분량이 크게 나타났다. 후면처짐분은 정면과 같이 S시료에서 드레이프성이 좋을수록 처짐분이 크고, 엉덩이너비는 크고, 엉덩이두께가 작올수록 처짐분이 크게 나타났다. 4. 플레어 스커트의 3차원 입체형상은 외관형상의 굴곡이 낮아 평평할 수록 이미지의 평균값은 높고 편차는 낮게 나타났다. 체형변인에 의한 플레어 스커트의 주름 형상을 정면, 측면, 후면에서 이미지 값 분포로 비교해 보면 정면, 후면보다 측면의 외관이 평활하여 이미지 분포폭이 좁게 나타나고 최빈값을 중심으로 회색에 가까운 쪽으로 치우쳐 있는 것을 불 수 있다. 5. 체형변인에 따른 플레어 스커트의 주름특성을 평가하기 위하여 영상처리법으로 얻은 결과를 3차원 업체형상으로 분석하기 위하여 6개의 영역을 측정한 결과 플레어 스커트는 체형유형에 따라 곡면을 형성하는 주름의 수와 주름강도가 다르게 나타나 위 아랫부분의 주름폭은 차이가 있었다. 위부분에서 아랫부분으로 내려올수록 주름높이 폭은 커졌다. 그러므로 주름의 높이와 플레어 스커트의 헴라인 단연형상의 노드각도와 밀접한 관련이 있는 것으로 나타났다. 즉, 주름의 높이가 높으면 노드 각도는 작은 값을 보이고, 주름의 높이가 낮으면 노드각도는 큰 값을 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.