• Journal of Fashion Business
• /
• v.28 no.1
• /
• pp.1-19
• /
• 2024

This study explores application of upcycling design methods in structural transformation of second-hand denim clothing, aiming to achieve sustainable design objectives. By drawing inspiration from Liu Qing's research methods in the field of circular utilization of denim clothing, this study collected and analyzed cases of structural transformation of used denim clothing from 2020 to 2023. It summarized structural transformation design methods for used denim clothing. Through the development of design works, this study aims to find out the best upgrading and renovation design strategy by applying the method of structural renovation design. This study aims to support the development of a sustainable fashion industry and promote recycling and upcycling of discarded clothing fabrics, thereby reducing resource waste and environmental impact.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.181-191
• /
• 2005

This article describes a simplified mathematical model and the relevant numerical algorithm to simulate the draped cloth on virtual human body. The proposed algorithm incorporates an elliptical, or non-consecutive, method to simulate the cloth wrinkles on moving bodies without resorting to the result of the past time-steps of drape simulation. A global-local analysis technique was employed to decompose the drape of cloths into the global deformation and the local wrinkles that will be superposed linearly The global deformation is determined directly by the rotation and the translation of body parts to generate a wrinkle-free yet globally deformed shape of cloth. The local wrinkles are calculated by solving simple elliptical equations based on the orthogonality between conjugate harmonic functions representing the wrinkle amplitude and the direction of wrinkles. The proposed method requires no interpolative time frames even for discontinuous body postures. Standing away from the incremental approach of time integration in conventional methods, the proposed method yields a remarkable reduction of CPU time and an enhanced stability. Also, the transient motion of cloth could be achieved by interpolating between the deformations corresponding to each static posture.

• Fashion Information and Technology
• /
• v.1
• /
• pp.45-54
• /
• 2004

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.6
• /
• pp.1080-1095
• /
• 2023

Three-dimensional virtual fitting has become a trending practice in the fashion industry because of its productivity benefits, allowing garments to be virtually worn by avatar models without physical production. This study analyzed the variables influencing clothing pressure in both real and virtual fittings to expand the potential utility of pressure data derived from the latter. For this purpose, six sets of compression garments were created by combining two types of tricot fabrics and three types of reduced-pattern tops, with the clothing for real and virtual fittings having identical dimensions. Focus was directed to analyzing the correlation among clothing pressure, surface area deformation, and the mechanical properties of the fabrics. In real fittings, clothing pressure was influenced by multiple factors, including garment design, pattern reduction ratio, body shape, and fabric properties, consistent with existing knowledge. In virtual fittings, however, only the digital mechanical characteristics of the fabrics significantly influenced clothing pressure. The findings suggest that a more reliable implementation of clothing pressure in virtual fitting programs necessitates an approach that considers the complex structural information of garments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.442-454
• /
• 2011

This study analyzed the present uniform satisfaction, uniform satisfaction followed by physical satisfaction, attitude for uniform, purchase attitude for uniform, satisfaction for design, preference for design, and attitude for uniform alteration behavior by distributing questionnaires to high school girl students in Daejeon City. The results of the study are as follows. The study distributed questionnaires to 319 high school girl students in Daejeon City and analyzed the satisfaction factors for their uniforms. As the result, this study induced four factors. The average value of each factor appeared in order of symbolic satisfaction, management satisfaction, activity satisfaction, and aesthetic satisfaction to show that high school girl students were the most dissatisfactory in aesthetic satisfaction. When the study examined the realities of uniform alteration, it showed that 71.2% of them altered their uniforms. In the alteration of a jacket and a skirt, they altered their jackets shortly and tightly in the mass in the order of: waist measurement, jacket length, breast width, shoulder width, and girth of the chest in a jacket. For a skirt, they altered their skirts tightly as a jacket in the order of: skirt length, waist measurement, and the girth of hip.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.296-305
• /
• 2006

This study evaluate the effect of laundering on the deformation of knitted spandex/cotton fabrics compared with that of knitted cotton fabrics. Commercial knitted spandex/cotton and knitted cotton fabrics for T-shits were laundered in a drum-type washing machine and dried in a tumble dryer. Wale spirality, shrinkage, elastic recovery and surface contour of knitted fabrics were investigated under different laundering conditions: washing temperature, presoaking time and washing cycles. Knitted spandex/cotton fabrics had a lower angle of spirality than knitted cotton fabrics. After the first washing cycle, the angles of spirality of all the fabrics had decreased greatly. Knitted cotton fabric of low density deformed more than that of higher density. Knitted spandex/cotton. fabric of low density shrank less, because of the greater extension given during heat-set. Permanent elongation length at the 80$\%$ extension was longer than at the 50$\%$ extension, and the knitted spandex/cotton fabric which was expanded greatly during heat-set had a lower elastic recovery rate. The surface appearance of the knitted spandex/cotton fabrics was worsl~ than that of the knitted cotton fabrics before laundering and after repeated laundering, because of the much protruded cotton fibers from the yarns.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.1-17
• /
• 2019

The objective of this study was to investigate electrical conductivity of fabrics from polyester (PET) and Nylon (N) containing polyurethane (PU), with silver paste patterns screen-stenciled in three directions. The PET/PU and N/PU fabrics knitted or woven were uniaxially strain-recovered up to 22.5% in three times when each change in electrical resistance was simultaneously measured. This study established four variables that complexly affected electrical conductivity of these specimens; fabric structures, components, cover factors, and the percolation of silver particles. The woven or knitted fabric structures did not distinctively cause the changes in electrical resistance, however, the woven fabrics with the diagonal patterns showed their relatively high electrical resistance. The PET/PU fabrics with increasing the PET proportion generally presented the opposite propensity to its electrical conductivity. The changes in electric resistance of the PET/PU 85/15 2/1 twill and double plain fabrics instantaneously responded to the rate of elongation. The PET/PU group exhibited a reverse correlation between its cover factor and electrical resistivity. The highest electrical conductivity of the PET/PU 95/5 interlock fabric, with very few fluctuations, was attributed to the deep percolation of the silver particles that bridged the gaps between one loop and another. On the other hand, the occurrence of the silver cracks along with the elongated direction led to the immeasurably high change in electrical resistance as the strain increased.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2000

The purpose of this study is to investigate the consumer's complaints for clothing products in quality, uses and care. The consumer's complaints that were lodged to in consumer's claim center, Taejon Housewives Classes, from 1997 Jan. to 1999 Mar. were analyzed. The major results were as follows. 1. Complainers are generally females in their thirties and forties. Out of the clothing items, jackets and jumpers are the most part. Periods of uses and prices of accused clothing are less than one year and one hundred thousands won respectively. For claims about purchasing places, department store ranked first. 2. The complaints are mostly claims related to quality of clothing products, for example damage, color change, deformation, pilling and shrinkage. 3. Concerning the results of claim consideration, responsibility's whereabouts is that consumers, manufacturers, launderer rank in order.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.179-186
• /
• 2005

Girls' school uniform evaluative criteria and their uniform modification were investigated. The data were collected by questionnaire from 579 middle and high school girls living in Incheon during the fall of 2003. The uniform evaluative criteria consisted of five dimensions: aesthetics, comfort, economy, management, and status concealment factor. The uniform evaluative criteria were used to cluster the students into five groups: economic, practical, aesthetic, negative, and active. The uniform modifications were investigated in regard to sleeve length, sleeve width, breast width, jacket length, skirt length, hip width, and waist width. The aesthetic and the active groups intended to modify uniforms less in sleeve length and skirt length than the other three groups. There were significant differences in the uniform modifications among demographics: school years, height, weight, spending money, satisfaction/dissatisfaction with spending money, and clothing expenditures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.2
• /
• pp.189-196
• /
• 1994

The purpose of this study is to develop a computer program for automatic dart manipulation, as well as basic pattern making, of women's front bodice. In addition to accuracy and efficiency In pattern making, this computer program provides variations of basic patterns through dart manipulation. AutoCAD, running on the Austin 486DX micro-computer is used for this research. The procedures of this study are as follows : 1. A pattern-making method for women's front bodice is selected. 2. All co-ordinate points are located following the same way and order of drafting. 3. Drafting of a basic front bodice is programmed 4. Functions for various single dart manipulations are defined. 5. Menu-driven user interface is developed.