• Title/Summary/Keyword: 의도 부착

Search Result 50, Processing Time 0.023 seconds

신문지 재활용 공정의 일차 점착성 이물질 실시간 정략을 위한 새로운 방법

  • 김동호;류정용;김용환;송봉근
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2002.05a
    • /
    • pp.46-48
    • /
    • 2002
  • 본 연구는 신문지 고지의 점착성 이물질 중 Primary Stickies의 정 량에 관한 것으로 서, 실제 신문지료를 화상분석하여 실시간으로 매크로크기의 점착성 이물질올 측정할 때 효율적인 측정조건을 탐색하여 제지공정의 l 현장에서 일차 점착성 이물질을 정량 하는 새로운 측정기의 측정 기준을 제시하고자 하였다. 이물질이란 제지공정에 의도적으로 첨가되지 않은 불질의 총칭으로 dirt 및 각종 점착 성 이물질 즉, stickies를 들 수 있다. 이 가운데 스틱키{stickies}란 부드럽고, 점착성을 나타내는 이물질의 총청으로 주로 점착제와 확스에 의해 형성된다. 스틱키는 고지 재활 용의 효율성을 가장 크게 저해하는 이물질로 와이어, 펠트 및 기타 공정요소에 부착되 어 초지 시 지절을 발생시킴으로써 생산성을 저하시킬 뿐 아니라, 외관상 상품가치와 인쇄적성올 저하시키며, 최종 제품의 강도적 물성 및 가공적성에도 영향을 미친다. 특 히 국내에서는 원가절감을 위해 고지의 재활용율올 증대시키고자 전력을 다하고 있으 며 환경보호 및 용수 절감올 위해 공정수를 절감하고 궁극적으로는 무방류화를 목표로 하고 있어 토지 계 내의 점착성 이물질의 투입과 농축 현상이 심각하게 진행되고 있는 실정이다. 초지공정에서 발생하는 스틱키 즉 점착성 이물질은 미세한 스크린의 슬롯 폭인 0.15 - -0.3mm 이상의 크기를 가져 스크린에 의해 분리될 수 있는 매크로 스틱키{macro s stickies}와 이보다 작은 마이크로 스틱키(micro stickies)로 크게 분류된다. 즉 매크로 스틱키는 스크린에 의해 분리될 수 있으나 마이크로 스틱키는 스크린을 통하여 기계적 으로 분리할 수 없다는 문제점을 지니고 있다. 스틱키는 또 거동 특성에 따라 primary s stickies와 secondary stickies로 구분할 수 있다. primary stickies는 펄핑과정에서 점착 성 이물질이 파괴됨에 따라 나타나지만, secondary stickies는 지류 제지공정의 백수에 용해 되거나 분산된 상태인 1때1 이하의 콜로이 드로 폰재 한다. 이 러 한 secondary stickies 는 pH, 온도의 변화나 각종의 첨가제에 의해 웅집이나 홉착 등을 발생할 수 있는 잠재 적 문제점 등을 가지고 있다. 예를 들어 양성 고분자의 첨가는 펄프 섬유를 웅집시킬 뿐 아니라 지료에 함유된 secondary dtickies의 안정성을 저하시켜 응집, 침적시키는 작용을 한다. 따라서 분리가 어렵고, 제지공정에서 문제를 일으키기 쉬운 2차 스퇴키를 적절히 제어하기 위한 기술 개발은 용수절감 뿐 아니라, 초지공정의 침적물 절감을 통 한 공정개선에도 매우 중요한 요소기술이라 할 수 있다.

  • PDF

An Exploratory Study on the Applicability of Thin-Film Photovoltaic Cells for Auxiliary Power Supply of a Personal Rapid Transit (PRT) Vehicle (PRT 차량의 보조 전력공급을 위한 유연소재 태양전지의 적용 가능성 연구)

  • Kang, Seok-Won;Han, Soo-Jin;Jeong, Rag-Gyo;Oh, Hyuck Keun;Ko, Sangwon;Choi, Dooho
    • Journal of the Korean Society for Railway
    • /
    • v.17 no.2
    • /
    • pp.94-99
    • /
    • 2014
  • Recently, trends in new transportation system development have been primarily focused on sustainable and ecofriendly mobility solutions. The personal rapid transit (PRT) system has been considered a promising candidate in this category; its competitiveness is being improved through convergence with cutting-edge electric vehicle (EV) technologies. However, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. In this study, a design approach for a solar-power assisted PRT system is presented with small-scale demonstrations aimed at circumventing challenges facing its adoption, as well as helping speed the transition to electric-powered ground transportation. From the results, it is expected that flexible photovoltaic (PV) cells will be able to supply 11% of the power required by the service equipment installed in a prototype vehicle. In particular, flexible photovoltaic (PV) cells are advantageous in terms of cost, weight, and design considerations. Most importantly, the cells' flexibility and attach-ability are expected to give them great potential for extended application in various areas.

Research on Light Application System for the Dynamic Moving Effect of The Design on Porcelain (도자기 표면의 문양을 역동적으로 움직이는 효과를 갖는 광응용 시스템연구)

  • Ryoo, Hee Soo
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.11
    • /
    • pp.205-210
    • /
    • 2014
  • This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.

인터넷 기반 원스톱서비스 시스템 개발에 관한 연구+ -수출컨테이너화물 원스톱서비스 시스템 개발-

  • 박남규;최형림;김현수;박영재;조재형;이철우
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 1999.10a
    • /
    • pp.299-308
    • /
    • 1999
  • 오늘날 우리 나라가 당면한 최우선 경제과제중 하나는 물류부분의 혁신을 통한 국가경쟁력 강화라고 할 수 있으며, 이를 위해 정부도 1993년 물류체계 개선을 위한 장기구상으로 ‘화물유통체계 개선 10개년 기본계획’을 수립하여 적극 추진 중에 있다. 그러나 이러한 노력에도 불구하고 PORT-MIS사용자를 상대로 한 설문조사에서는 선박입출항 업무 관련 서류의 40%, 항만시설 사용 업무와 관련된 서류의 31%, 하역업무 관련 서류의 10%만이 EDI를 활용하고 있었다. EDI 활용이 저조한 사유로는 전송시간이 많이 걸리며, EDI 소프트웨어가 작동되지 않으며, 수신확인이 되지 않기 때문이라 응답을 하였다. 이처럼 오늘날 항만물류산업이 겪고 있는 물류 데이터 흐름이 단절적 현상은 시간이 흐를수록 해결 될 기미가 보이고 있지 않다. 따라서 본 논문에서는 우리 나라가 겪고 있는 물류관련 업무를 한번의 데이터 입력으로 해결할 수 있는 원스톱 서비스 시스템개발을 목표로 우선 PORT-MIS EDI 업무를 처리할 수 있는 시스템을 구축하였다. 이는 향후 화주, 운송사, 선사, 포워더, 창고업자,하역회사, 철도청, 화물터미널, 컨테이너 터미널, 해양수산청, 관세청, 출입국관리사무소, 검역소 사이에 서로 교환되는 적하목록, Booking List, 컨테이너 Pick up정보, 위험물 정보, COPINO 정보를 비롯하여 대 관세청 신고 등 수출컨테이너 화물업무의 전반적인 영역으로까지 쉽게 확대할 수 있을 것이다. 본 연구결과 구축된 시스템은 원천정보를 중앙의 통합데이터베이스에 저장하여 이를 사용자의 요구에 의해 인터넷을 통해 전달하는 FTP와 웹 EDI 방식을 결합한 하이브리드 형태이다.CS Cell 방식에 의한 위치결정방식을 채택하였는데, 이것은 PCS망을 기반으로 데이터를 주고받이며 인터넷 단말기로 확장 가능한 PCS 단말기를 사용해서 위치추적을 하는 시스템이다. 이러한 시스템을 선정하게된 배경은 단말기아 망 이용료의 가격이 저렴하여 현실적으로 트럭이 쉽게 부착할 수 있다는 장점이 있으며 나아가 인터넷 단말기를 활용하여 차량과 관제센터사이에 메시지 전송 등 부가적인 서비스가 가능하기 때문이다.비교한 결과 토사 유출 억제효과는 한지형과 나지형잔디들의 혼합형(MixtureIII)과 자생처리구(MixtureV), Italian ryegrass와 자생식물의 혼합형(MixtureIV)등에서 비교적 낮은 수치를 토사유출량을 기록하였다. 이러한 결과는 자생식물들이 비록 초기생육속도는 외래도입초종에 떨어지지만 토사유출의 억제효과면에서는 이들 외래초종에 필적할 수 있음을 나타낸다고 할 수 있겠다.중량이 약 115kg/$m^2$정도로 나타났다.소 들(환경의 의미, 사람의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인

  • PDF

Effect of Vanadium Addition on the Cavitation Erosion Resistance of Fe-Cr-Ni-Si-C Hardfacing Alloy (Fe-Cr-Ni-Si-C계 경면처리 합금의 Cavitation Erosion 저항성에 미치는 Vanadium 첨가의 영향)

  • 김경오;김준기;장세기;김선진;강성군
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 1998.11a
    • /
    • pp.72-72
    • /
    • 1998
  • 원자력발전소 1차계통내 밸브의 경면처리(hardfa따1잉에 사용되는 재료는 $90~343^{\circ}C$의 고온과 높은 접촉응력 그리고 급격한 압력변화가 일어나는 환경에서 사용되기 때문에 내마모성과 내식성 그리고 cavitation erosion 저항성이 우수한 Co계 Stellite 합금이 현재 사용되어진다. 그러나 Co가 원력발전소 1차계통의 방사선장을 형성하는 주요 원소로 알려지면서 S Stellite 합금을 대체할 수 있는 Fe계 경면처리용 합금을 개발하려는 연구가 진행되고 있다. 현재 Fe계 경면처리용 합금의 개발은 적절환 팝금원소를 첨가하여 적충결함에너지를 낮춤 으로써 전위의 교차슬립을 억제하여 표면을 경화시키고, 소성변형을 억제하여 마모저항성을 향상시키려는 방법으로 연구가 진행되고 있다. 본 연구에서는 Fe-Cr-Ni-Si-C 합금에 Fe계 합금의 적충결함에너지를 감소시키는 것으로 알려진 vanadium을 0, 1, 2wt%첨가하여 첨가량의 변화가 cavitation erosion 저항성에 미치 는 영향을 조사하였다. Cavitation erosion 실험은 초음파를 이용하여 미세한 기포를 발생시키는 vibratory type으로 A ASTM G-32 규격에 따라 제작된 실험장치를 이용하여 $25{\pm}2^{\circ}C$의 온도의 증류수 속에 잠긴 상태에서 실시하였다. 시면은 지름 16mm, 두게 7mm의 버턴형태로 vanadium 첨가량을 변화시킨 조성을 아크 용융 방법을 이용하여 제작하였으며 hom끝단부에 부착하여 cavitation e erosion 저항성 살험을 하였다. 시편의 cavitation erosion 실험시간에 따른 무게감소량을 측 정하였으며 cavitation erosion 시킨 시편의 표면을 SEM으로 관찰하였다.겨지는 열전달 매체액 과 신규 부식억제제가 적용된 시스템 등 객관적으로 확인된 부식억제제 시스랩에 대 하여 다양한 평가 방법을 동원 비교분석하고자 하였다. 실험은 KSM 2142에 의한 무게감량법, 분극곡선 측정에 의한 $E_P$(공식개시전위), $E_R$(재부동태화전위) 측정, 시간에 따른 자연전위 변화 측정 빛 이때의 부식속도(선형분극법), 인위적인 피막 파괴 전,후 의 전위 변화 및 부식속도 측정법에 의한 국부부식 발달 저지능 등을 평가하여 각 실험결과를 비교분석하여 보았다. 수록 민감하여 304 의 IGSCC 와 매우 유사한 거동을 보인다. 본 강연에서는 304 와 600 의 고온 물에서 일어나는 IGSCC 민감도에 미치는 환경, 예민화처리, 합금원소의 영향을 고찰하고 이에 대한 최근의 연구 동향과 방식 방법을 다룬다.다.의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$

  • PDF

A Study on Emergency Evacuation Route Planning and USN-Based Induction Activities of Correctional Facilities (교정시설의 비상시 피난경로계획 및 USN기반 대피유도활동에 관한 연구)

  • Park, Joo-Hyung;Park, Jong-Hyun
    • Fire Science and Engineering
    • /
    • v.25 no.2
    • /
    • pp.39-46
    • /
    • 2011
  • In correctional facilities with majority of occupants in custody, the safe evacuation guide without getaway accidents should be very important due to complexity in escape paths. Fire causes are various in correctional facilities, for example, arson fire is a major cause in mental treatment facilities, however, old facilities or carelessness of flammable materials consist of fire causes in jail facilities. Both types of correctional facilities are the same in terms of many casualties from the fire cases. The thesis focus on escape paths and evacuation guide plans on the basis of analysis on fire cases and structural vulnerability, and then an electronic unlocking system is concededly installed for safe evacuation of occupants in custody without getaway accidents. Especially, the effect of the electronic unlocking system is going to be analyzed on the basis of RSET (required safe egress time) in order to realize for the occupants to evacuate safely to the front yard in case of emergency. In conclusion, if electronic security allowed system with USN (Ubiquitous Sensor Networks) technology should be installed in multi-storey correctional buildings, it is proposed that the occupants in custody might be a guided safely without getaway trials.

Internalizing Environmental Cost using TDM Alternatives (교통수요관리 기법을 활용한 환경오염비용의 내부화 방안연구)

  • 김운수;엄진기;황기연;장지희
    • Journal of Korean Society of Transportation
    • /
    • v.17 no.4
    • /
    • pp.99-110
    • /
    • 1999
  • With a growing awareness, transportation is the maior source of urban air pollution. Planners and policy-makers are strongly urged to care the impacts of transportation management strategies on environment. Since transport-related air Pollution can be regarded as negative externalities of transport, it is indispensable to evaluate chanties in air quality which seems to occur when proposed transport measures are implemented. In addition, transport measures should be integrated in a set of combined Paradigm regarding transport and environment. Based on the integrated Paradigm between transportation demand management(TDM) and environmental planning, the main focus is given to apply environment cost internalizing measures to the short-term congestion management Program(SCMP) in Seoul, that has been developed in 1998 by Seoul Development Institute. Three modules are analyzed: without and/or with ₩500, ₩1000 emission plus gas tax, respectively. From the empirical applications on Seoul city, one of the most exemplary findings in SCMP program is that, emission plus gas tax can be a very useful measure to reduce vehicular emissions by targeting major Pollutants differently, rather than by dealing with pollutants collectively. Further research that provides (1)showing the spatial variation of pollution levels along the intersections, (2)more developing combined Paradigm between transport, land use, and environment, (3)using environmental road capacity rather than Physical-aspects of road capacity, and (4)continuing R&D on air quality constrained TDM, can contribute significantly to applications of the real and efficient environment-constrained transportation planning.

  • PDF

Risk Assessment of Fipronil on Honeybee (Apis mellifera) (Fipronil의 꿀벌 (Apis mellifera)에 대한 위해성 평가)

  • Kim, Byung-Seok;Yang, Yu-Jung;Park, Yeon-Ki;Jeong, Mi-Hye;You, Are-Sun;Park, Kyung-Hun;Ahn, Young-Joon
    • The Korean Journal of Pesticide Science
    • /
    • v.13 no.1
    • /
    • pp.39-44
    • /
    • 2009
  • This study was conducted to evaluate the actual risk of fipronil on worker honey bees (Apis mellifera L.) through acute contact toxicity test, acute oral toxicity test, toxicity of residues on foliage test, and small scale field test. The $48h-LD_{50s}$ of fipronil SC on honeybee were $0.005{\mu}g$ a.i./bee in acute contact toxicity test and $0.004{\mu}g$ a.i./bee in acute oral toxicity test, respectively. In toxicity of residues on foliage test, fipronil showed over 90% of mortality during 28days after treatment at recommended application rate. The $DT_{50}$ of dislodgeable foliar residue was 9 days. Finally, In small scale field test, fipronil showed similar toxicity in the residues on foliage test. It was concluded that fipronil has very high acute toxicity and long residual toxicity to honeybee. Therefore, fipronil is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area. To protect honeybee and wild pollinators from outdoor use of fipronil, ultimately it should need to limit for only indoor use to prevent pollinators from unintentionally exposure of fipronil.

Analysis of the Spatial Dose Rates during Dental Panoramic Radiography (치과 파노라마 촬영에서 공간선량률 분석)

  • Ko, Jong-Kyung;Park, Myeong-Hwan;Kim, Yongmin
    • Journal of radiological science and technology
    • /
    • v.39 no.4
    • /
    • pp.509-516
    • /
    • 2016
  • A dental panoramic radiography which usually uses low level X-rays is subject to the Nuclear Safety Act when it is installed for the purpose of education. This paper measures radiation dose and spatial dose rate by usage and thereby aims to verify the effectiveness of radiation safety equipment and provide basic information for radiation safety of radiation workers and students. After glass dosimeter (GD-352M) is attached to direct exposure area, the teeth, and indirect exposure area, the eye lens and the thyroid, on the dental radiography head phantom, these exposure areas are measured. Then, after dividing the horizontal into a $45^{\circ}$, it is separated into seven directions which all includes 30, 60, 90, 120 cm distance. The paper shows that the spatial dose rate is the highest at 30 cm and declines as the distance increases. At 30 cm, the spatial dose rate around the starting area of rotation is $3,840{\mu}Sv/h$, which is four times higher than the lowest level $778{\mu}Sv/h$. Furthermore, the spatial dose rate was $408{\mu}Sv/h$ on average at the distance of 60 cm where radiation workers can be located. From a conservative point of view, It is possible to avoid needless exposure to radiation for the purpose of education. However, in case that an unintended exposure to radiation happens within a radiation controlled area, it is still necessary to educate radiation safety. But according to the current Medical Service Act, in medical institutions, even if they are not installed, the equipment such as interlock are obliged by the Nuclear Safety Law, considering that the spatial dose rate of the educational dental panoramic radiography room is low. It seems to be excessive regulation.

A study on optical coherence tomography system using optical fiber (광섬유를 이용한 광영상 단층촬영기에 관한연구)

  • 양승국;박양하;장원석;오상기;김현덕;김기문
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2004.04a
    • /
    • pp.5-9
    • /
    • 2004
  • In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A/D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

  • PDF