• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3336-3344
• /
• 2014

The purpose of this study is small scale coagulation module is developed and demonstrated through a lab-scale test. Recent as a sewage treatment rate increases, have heightened the interest in the necessity on the nonpoint source and developing a small processing unit has been increased. Coagulation sedimentation module in this study is additional growth of floc through swirling in the outside zone, reduction of microstructure floc number and the internal settling zone through vertical/level flow complex sedimentation method after the coagulation process precipitation method as an effective high separation efficiency can be divided was also assessed. Coagulation sedimentation module can increase the load factor was 4.4 times compared to conventional clarifier base on the same volume and surface area through vertical/level flow. In this study, this process was selected formation and maintenance of swirling and uniform flow distribution in the internal settling zone as an important design factor, to derive its FLUENT was used to characteristics of the flow model. Through the simulation of swirling, influent velocity, dimensions of external basin, hopper depth of bottom cone was determined and through analysis of velocity distribution, flow distribution detailed specifications are derived like as diameter and number of effluent hole. Lab-scale($120{\ell}/hr$) test results, influent of 300~800 NTU to less than 10 NTU without polymer feeding was able to operate in the 20minutes retention time(surface loading rate $37.3m^3/m^2$-day), and through analysis FLUENT the possibility of using design parameters were derived.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.133-134
• /
• 1997

1. 서론 : 제지산업은 용수 다소비용 산업으로, 생산하는 제품 톤당 약 40톤으로 폐수가 배출되고 있으며 공정내로 재활용하는 폐수량을 고려한다면 그 사용량은 더욱 클 것이다. 이와 같은 다량의 용수 사용으로 인하여 제지 공장의 폐수를 제조공정에서 재활용하는 방법이나 배출량을 감소시키는 방안들이 법률적이나 경제적인 측면에서 연구되고 있는 실정이다. 본 연구에서는 기존의 응집, 침전공정을 대신하고 여재를 이용힌 물리적 여과와 활성높은 미생물이 여재 표면에 부착되어 수중 유기물질을 생물학적으로 분해 제거하는 이중의 효과를 거둘 수 있는 호기성 생물막 공정을 도입하고 그 처리수의 유기물 및 용존 무기물을 Membrane 공정으로 제거함으로써 제지공업폐수를 재활용하여 용수기준까지 처리하 System의 개발을 그 목적으로 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.226.2-226.2
• /
• 2014

나노 사이즈의 Ni 입자 ink를 제조하고 이를 전기수력학 인쇄공정에 적용하기 위하여 잉크의 유변학적 특성 및 최적 물성 발현을 위한 인쇄공정에 대한 연구를 진행하였다. Ni 잉크의 점도 및 증발거동 조절을 통해 전기수력학 인쇄공정을 최적화 하는 연구를 수행하였다. Ni 나노입자 잉크의 초기 점도가 낮고 인쇄성이 확보되지 않아 잉크내 응집성을 향상시켜주기 위한 다양한 additive들을 선정하여 전기수력학에 적합한 잉크 물성 확보에 비중을 두고 실험을 진행 하였다. 터비스캔을 사용하여 제조된 잉크 안정성에 대한 연구를 진행하였다. 다양한 인쇄공정 변수의 최적화를 통해 미세선폭 (< 20 um)이 가능한 전기수력학 인쇄공정을 확립하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.893-899
• /
• 2011

The occurrence of THMs, the characteristics of THMs formation and removal of THMs were investigated. The treatment train of M plant consists of prechlorination, flocculation, sedimentation, filtration, ozonation, activated carbon and postchlorination. The study of THM formation indicated that about 92% of the THMs were formed in the flocculation/sedimentation/filtration process which affected by prechlorination. The formation of THMs was highly correlated to $KMnO_4$ consumption and water temperature in raw water. The regression model had showed 0.72~0.80 of determination coefficient so it could be used to predict the amount of THMs formation in finished water. Compared to the prechlorination process, the THMs formation was reduced in interchlorination process. With the addition of PAC, fewer THMs were formed in PAC-chlorination process than in chlorination-PAC process. Our results showed that air stripping could be used to remove the existing THMs.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.133-137
• /
• 2014

As a preceding process for preparing several micrometer sized Ag-coated Cu flakes, ball milling of submicrometer-sized Cu particles synthesized through a wet chemical method was performed in order to convert the particles into flakes. To suppress oxidation and aggregation of the particles during ball milling, ethylene glycol and ethyl acetate were used as a medium and a surface modifying agent, respectively. Results obtained with different rotation speeds of a jar indicated that the rotation speed changes a rotating mode, and strikingly alters the final shapes and shape uniformity of Cu particles after milling. The diameter of zirconia ball was also confirmed. Although there was aggregates in the initial submicrometer-sized Cu particles, therefore, well-dispersed Cu flakes with a size of several micrometers were successfully prepared by ball milling through optimization of rotation speed, amount of ethyl acetate, and diameter of zirconia ball.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.33-37
• /
• 2006

An equal-molar mixture of silver chloride (AgCl) and copper (Cu) was ground in atmosphere conditions using a planetary ball mill to investigate mechanochemical (MC) reaction for preparation of silver powders. The reaction causes the mixture of AgCl and Cu to change the composition of the mixture, such as silver (Ag) and cuprous chloride (CuCl). Through the leaching with ammonium hydroxide solution (1 mol), CuCl can be separated from MC product, so that pure Ag powders can be obtained as the final product. Moreover, polyvinylpyrrolidone (PVP) was used as the additive not only to improve dispersion of Ag pow- der during MC process, but also to control surface oxidation of Ag powders, prepared as the final product.

• 수도
• /
• v.24 no.4 s.85
• /
• pp.30-38
• /
• 1997

County는 비용과 부지소요는 최소화하면서도 증가하는 지역적 물수요에 부합되는 높은 유량에서 정수장의 성능을 최대화해야하는 필요성에 직면해있다. 개선사항을 찾아내기 위하여 시설물에 대한 상세한 성능평가가 행해졌다. 성능평가는 여과와 소독공정이 운전방식의 조정과 함께 추가시설의 건설에 의하여 개선될 수 있음을 나타내었다. Pilot test는 실험된 여러 가지 대안들 중에서 혼화, 응집, 이중 여과방식이 입자의 제거와 정수 수질에 가장 좋은 것임을 보여주었다. 소독에 대한 분석 결과는 소독방법을 교정하고 추가적인 염소접촉시간을 주는 것이 소독의 안전성을 확보함과 동시에 정수의 소독부산물 농도를 최소한으로 하고 강화되는 규제치와 부합할 수 있는 최선의 방법이 될 것이라는 것을 보이고 있다. Pilot test는 저수두 자동역세척여과지가 1차여과지(roughing filter)로서 효과적이라는 것을 보여주었다. 실험결과는 이중여과가 최종유출수의 탁도를 평균 0.1NTU이하로 감소시키며 입자의 제거율을 3 log로 증가시킴을 나타내고 있다. 정수공정 전반에서의 입자의 제거는 여러 개의 공정의 개별적 성과의 합이 아니므로 시설물들을 건설하기 전에 정수장 전체적으로 예상되는 개선정도를 수량화하기 위하여 Pilot 실험이 필요하였다. Pilot test중에 탁도보다는 입자측정이 유량, 응집제의 주입량, 및 여타 운전조건의 변화에 훨씬 민감함을 보여주었다. 이러한 점이 입자측정이 특히 저탁도 원수에서 처리공정의 성능을 나타내 주는 적절한 추가적 수질인자라는 결론을 보강하여 주었다. 물수요에 부합하기 위하여 Freedom District 정수장을 성공적으로 개선하는 데는 원수의 수질, 단위공정의 성능, 활용가능한 수리학적 수두, 현시설의 배치, 운전양태 등과 같은 기술적 사항에 대한 고려가 필요하였다. 비록 모든 사항들이 각각 일정정도의 영향을 가지고 있으나, 상기의 모든 것들이 수질에 영향을 미쳤으며 수질의 성공적인 개선은 정수장 운전의 모든 부분을 파악할 수 있는 상세한 성능평가를 통하여 가장 잘 달성될 수 있다.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.332-341
• /
• 2023

The controversy is becoming a hot issue after informed that the water release from Canadian oil sands tailings may initiate within a few years. The surface-mined bitumen extraction in open pit generates wastewater inevitably, which has been conveyed to store in tailings ponds. Currently, the size of tailings pond is getting seriously larger. It is known that tailings treatment is very difficult because the generation of MFT (mature fine tailings) layer is hardly processable. It would be the key process to separate solids and liquid placed within MFT where fine particles are well dispersed. In this paper, the surface-mined bitumen extraction process was first introduced, and followed by presenting the components of tailings as well as the characteristics of MFT. In addition, MFT process options were evaluated. It is expected that successful MFT treatments may be achieved by dewatering process using effective polymer flocculants in near future.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.257-264
• /
• 2006

This study investigated the effects of hybrid process(chemical coagulation, Fenton oxidation and ceramic UF(ultrafiltration)) on COD and color removals of commercial reactive dyestuffs. In the case of chemical coagulation, the optimal concentrations of $Fe^{3+}$ coagulant for COD and color removals of RB49(reactive blue 49) and RY84(reactive yellow 84) were determined according to the different coagulant dose at the optimal pH. They were 2.78 mM(pH 7) in RB49 and 1.85 mM(pH 6) in RY84, respectively. In the case of Fenton oxidation, the optimal concentrations of $Fe^{3+}\;and\;H_2O_2$ were obtained. Optimal $[Fe^{2+}]:[H_2O_2]$ molar ratio of COD and color removals of RB49 and RY84 were 4.41:5.73 mM and 1.15:0.81 mM, respectively. In the case of ceramic UF, the flux and rejection of supernatant after Fenton oxidation were investigated. After ceramic UF for 9 hr, the average flux of RB49 and RY84 solutions were $53.4L/m^2hr\;and\;67.4L/m^2hr$ at 1 bar, respectively. In addition, the permeate flux increased and the average flux recovery were 98.5-99.9%(RB49) and 91.0-97.3%(RY84) according to adopting off-line cleaning(5% $H_2SO_4$). Finally, COD and color removals were 91.6-95.7% and 99.8% by hybrid process, respectively.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.61-61
• /
• 1995

본 연구의 목적은 향후 준설공사가 시행될 대다수 하천, 항만 및 호소 등을 대상으로 하여 효율적이며 경제적인 준설오니의 함수율 저감기술을 개발하는 것이며, 본 1차 년도 연구에서는 마산만 퇴적오니의 성상분석 및 준설오니의 최적응집공정 선정 실험을 실시하여 고액분리효율 및 경제성 등을 비교분석하여 향후 준설공사의 준설오니 고액분리공정에 효율적이며 경제적인 기초자료를 제시하는 데 있다. (중략)