• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.845-851
• /
• 2017

Fatigue failure of an autofrettaged pressure vessel with a groove at the outside surface occurs owing to the fatigue crack initiation and propagation at the groove root. In order to predict the fatigue life of the autofrettaged pressure vessel, residual stresses in the autofrettaged pressure vessel were evaluated using the finite element method, and the fatigue properties of the pressure vessel steel were obtained from the fatigue tests. Fatigue life of a pressure vessel obtained through summation of the crack initiation and propagation lives was calculated to be 2,598 cycles for an 80% autofrettaged pressure vessel subjected to a pulsating internal pressure of 424 MPa.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.157-162
• /
• 2011

High temperature and stress are encounted in power plants and vehicle engines. Therefore, determination of the creep-fatigue life of a material is necessary prior to fabricating equipments. In this study, life design was determined on the basis of the lethargy coefficient for different temperatures, stress and rupture times. SP-Creep test data was compared with computed data. The SP-Creep test was performed to obtain the rupture time for X20CrMoV121 steel. The integration life equation was considered for three cases with various load, temperature and load-temperature. First, the lethargy coefficient was calculated by using the obtained rupture stress and the rupture time that were determined by carrying out the SP-Creep test. Next, life was predicted on the basis of the temperature condition. Finally, it was observed that life decreases considerably due to the coupling effect that results when fatigue and creep occur simultaneously.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.101-109
• /
• 1999

The objective of this research is to study effects of the residual stresses on the crack growth and the life of the structure, caused by cold working around the hole of the aircraft structure which will be jointed by rivets and bolts, etc. The compensated Morrow's equation, by experimental data from the materials AL7075-T6 and AL2024-T3, is suggested to calculate the values of the fatigue life prediction of the structure. Also, the compensated Forman's equation, by experimental data from a material AL7075-T6, is suggested to calculate the values of the crack growth prediction of the structure. It is founded that the calculated values from the suggested equations are almost close to the known values of the fatigue life prediction and the crack growth prediction. It is shown that this paper, associated with an initial research on the effects of residual stresses around hole, gives a direction to study the problem at the aircraft maintenance field.

• Composites Research
• /
• v.19 no.1
• /
• pp.22-28
• /
• 2006

In manufacturing process of composite cylinders with metal liner, the autofrettage process which induces compressive residual stress on the liner to improve cycling life can be applied. In this study, a finite element analysis technique is presented, which can predict accurately the compressive residual stress on the liner induced by autofrettage and stress behavior after. Material and geometrical non-linearity is considered in the finite element analysis, and the Von-Mises stress of a liner is introduced as a key parameter that determines pressure cycling life of composite cylinders. Presented methodology is verified through fatigue test of liner material and pressure cycling test of composite cylinders.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.87-100
• /
• 1989

해양구조물의 원통형 조인트에 대한 파괴역학적 피로수명 산출방법이 개발되었다. 개발된 방법을 이용해서 2평면 K형 조인트에 대한 피로수명을 구체적인 파괴역학적 방법으로 산출 하였다. 이 분석을 위해 용접부위 표면균열의 응력확대 계수를 3차원 유한요소법에 의해 계산하였다. 계산된 결과에 의하면 용접부위 표면균열 첨단은 단순한 Mode I형태를 보이지 않고 Mode I, II, III이 복합된 형태임이 입증되었다. 계산된 응력확대 계수를 사용해서 16개의 용접부위균열 성장형태를 일반적인 피로균열 성장법칙을 적용해서 계산하였고, 균열성장의 안정분석을 통해 각 균열의 최종 파괴상태를 파괴해석도면(failure assessment diagram)법을 이용해서 계산하였다.

• The tire
• /
• s.65
• /
• pp.10-17
• /
• 1976

아민계열화방지제(이하 아민이라고 한다)를 첨가한 천연고무 순고무가유물에 대해서 고온으로 반복대신장피로를 주어서 응력변화, 피로수명에 주는 열화방지제의 영향을 조사하였다. 아민첨가시료에 대해서 고온으로 반복 신장피로를 가하면 무첨가시료와 동양, 화학응력 연화가 출현했다. 아민첨가시료의 화학응력연화의 임계온도는 NR-DPG로 110℃, NR-MBTS로 110℃, NR-TT로 130℃이며 가교구조의 내열성에 일치하며 무첨가시료의 임계온도보다도 10~30℃높아졌다. 아민첨가시료의 반복신장피로수명은 60℃로 극대화 되어 (NR-DCP만이 40℃이었으나) 무첨가시료의 피로수명은 40℃에서 극대화됐다. 전보에서 보고한 피로수명과 변형률과의 관계식(F=A(εb-ε)n)은 100℃에서 아민첨가시료에 대해서만이 성립하고 무첨가시료에 대해선 성립되지 않았다. 이들의 결과는 아민을 고무에 첨가함으로써 고무의 열산화반응이 억제되었음에 원인하고 있다고 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.85-93
• /
• 2012

In this study, the geometry of the weld is used to develop the process of fatigue life prediction. For the development of fatigue life prediction process, bending fatigue test of muffler is conducted to obtain M(Moment)-N(Fatigue life) diagram. Modeling the geometry of the weld which is failed is performed to conduct static load analysis and analysis results are used to calculate the stress concentration factor. The stress concentration factor is used to get the fatigue notch factor and this was based on the fatigue life prediction. As a result of the comparison of test values and predicted values, predicted values are verified.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.11a
• /
• pp.23.1-23.1
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.790-805
• /
• 1988

Static strength and fatigue life scattering of glass fiber reinforced epoxy composite materials has been studied. Normal, lognormal, two-parameter and three-parameter Weibull distribution functions are used for strength and one-stress fatigue life distribution. The value of mean fatigue life is analysed using mean fatigue life, mean log fatigue life and expected value of 2 and 3-parameter Weibull distribution functions. Modification on non-statistical cumulative damage models is made in order to interpret the result of two-stress level fatigue life scattering. The comparison results show that 3-parameter Weibull distribution has better predictions in static strength and one-stress level fatigue life distributions. However, no advantage of 3-parameter Weibll distribution is found over 2-parameter Weibull distribution in two-stress level fatigue life predictions. It is found that two-stress level fatigue life prediction by the expanded equal rank assumption is close to the experimental data.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.297-302
• /
• 1999

본 연구에서는 Post-Tensionging System용 정착구의 구성품인 2 Piece Wedge 와 3 Piece Wedge를 장착한 P.S 콘크리트 시험체의 피로 수명 예측과 피로수명 분포특성을 고찰하기 위하여 피로시험을 수행하였다. 피로 시험결과를 피로해석에 적합한 것으로 알려진 Weibull 분포에 적용하여 실험과 확률해석에 의한 회귀분석식 및 피로강도의 비교, 2 Piece Wedge 와 3 Piece Wedge 시험체의 안전계수, 응력수준별, 피로 수명 분포도, 응력 수준별, 파괴확률, 2 Piece Wedge 와 3 Piece Wedge의 위험 함수등을 고찰하였다. (중략)