References
- 박경동, 하경준, 박형동, "차량용 스프링강의 피로균열진전에 미치는 압축잔류응력의 영향", 한국마린엔지니어링학회지, vol. 27, no. 1, pp. 82-90, 2003.
- G. Kim, S. Kang, Y. Lee, S. Park and W. Jung, "Study on durability and reliability of strut type suspension noise based on experimental methods", Journal of Mechanical Sience and Technology, vol. 26, no. 1, pp. 1-9, 2012. https://doi.org/10.1007/s12206-011-1008-5
- 박세종, 박경성, 서호철, "자동차 배기시스템의 피로내구 해석 및 평가", 한국자동차공학회, 춘계학술대회논문집, pp. 886-891, 2004.
- 김강민, "자동차 배기계 SUS Flange-Pipe 서브어셈블리의 피로강도 평가", 울산대학교 석사학위논문, 2007.
- 조상명, "기계系의 신뢰성과 部材의 피로파괴", 한국마린엔지니어링학회지, vol. 12, no. 4, pp. 215-225, 1988.
- 손일선, 배동호, "점용접이음재의 피로수명 예측에 관한 확률적 검토(I) : Weibull 확률 분포 함수 적용", 한국자동차공학회논문집, vol. 7, no. 6, pp. 214-221, 2003.
- 홍승갑, 조민현, 강기봉, "페라이트계 스테인리스강의 재현 용접열영향부 열피로 특성", 대한용접.접합학회, 대한용접.접합학회지, vol. 27, no. 1, pp. 79-84, 2009. https://doi.org/10.5781/KWJS.2009.27.1.079
- J. A. Bannantine, J. J. Commer and J. L. Handrock, Fundamentals of Metal Fatigue Analysis, Prentice Hill, 1989.
- 김재훈, "철도구조물용 맞대기 용접시편 가공에 의한 피로수명 영향 및 용접부 형상을 이용한 피로수명 예측 연구", 한국철도학회논문집, vol. 9, no. 4, pp. 371-378, 2006.
- D. Radaj, "Review of fatigue strenth assessment of nonwelded and welded structures base on local parameters", Int. J. Fatigue, vol. 18, no. 3, pp. 153-170, 1996. https://doi.org/10.1016/0142-1123(95)00117-4
- J.Y. Yung, F. V. Lawrence, Jr., Prediction the fatigue life of welds under combined bending and torsion, College of Engineering University of Illinois at Urbana-champaign, A report of the Material Engineering-Mechanical Behavior, 1986.
- C. Robert, Juvinall, Engineering Considerations of Stress, Strain, and Strength, McGraw-Hill, pp. 237-267, 1967.
Cited by
- The prediction of fatigue life of muffler by artificial neural network vol.37, pp.8, 2013, https://doi.org/10.5916/jkosme.2013.37.8.869
- Fatigue Assessment of High Strength Steel Welded Joints Under Bending Loading vol.38, pp.10, 2014, https://doi.org/10.3795/KSME-A.2014.38.10.1163
- Effect of Weld Bead Shape on the Fatigue Behavior of GMAW Lap Fillet Joint in GA 590 MPa Steel Sheets vol.7, pp.10, 2017, https://doi.org/10.3390/met7100399
- 필릿 용접의 기계적 시험 특성 평가 vol.21, pp.2, 2012, https://doi.org/10.5762/kais.2020.21.2.535
- SM490-TMC 후판(40 mm) 강재의 SAW 용접을 통한 기계적 특성 연구 vol.22, pp.3, 2012, https://doi.org/10.5762/kais.2021.22.3.88