• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.231-237
• /
• 2000

A15052/AFRP laminates were developed principally to obtain a material with good fatigue strength, in which possible cracks would grow very slowly. Weight savings of more than 30% should be attainable in practice. Also, the crack bridging fibers could still was carry a significant part of the load over the crack, thus the COD and stress intensity factor was reduced at the crack tip. A15052/ AFRP laminates consists of three thin sheets of 5052-H34 aluminum alloy and two layers of [0] unidirectional aramid fiber prepreg. The cyclic-bending moment test was investigated based on applying the five kinds of bending moments. The size of the delamination zone produced between 5052-H34 aluminum alloy sheets and fiber-adhesive layers was measured from ultrasonic C-scan pictures taken around the fatigue crack. In addition, the relationship between the cyclic-bending moment and the delamination zone size was studied and the effect of fiber bridging mechanism was also considered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1062-1067
• /
• 2003

In this study, corrosion fatigue characteristics of CF8M and CF8A steel were investigated on the simulated PWR condition(Temp.:$316^{\circ}C$, Pres.: 15:MPa). To make the simulated PWR condition. the special test machine consisted of INSTRON, Autoclave, LOOP and Measurement system was developed. As ${\Delta}K$ is ranged from 11 to $20MPa{\sqrt{m}}$, Crack growth rate of PWR condition is faster than air condition. Above $20MPa{\sqrt{m}}$, the crack growth rate of PWR and air condition is similar. Corrosion fatigue characteristics regardless of the ferrite contents($10{\sim}25wt.%$) is not different. After the test, the fracture surface of specimens was examined. It was difficult to verify the fracture modes such as striation, intergranular crack and cleavage and so on. As the ferrite content of CF8M is increased, the more particles covered fracture surface were peeled.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1217-1222
• /
• 2012

능동 유동 제어의 되먹임 신호 및 벽면 전단 응력 측정 등을 위해 벽면 유동 센서가 사용되고 있다. 본 연구에서는 광학 마우스에 사용되는 미세 영상 장치를 이용하여 벽면 근처에서 2차원 및 3차원 유체 속도를 측정할 수 있는 센서를 개발하였다. 미세 영상 장치에서 나오는 영상 신호 획득 시스템을 구축하고 획득한 영상에 입자화상속도기법과 초점이탈 영상기법을 적용하여 측정 영역에서의 산란 입자의 위치를 측정하였다. 모사 유동 실험을 통해, 개발된 벽면 유동 센서의 공간 해상도 및 측정 정확도를 검증하였고 기존 미세 영상 장치의 quadrature 신호 결과와 비교하여 입자화상속도기법을 적용할 경우, 측정 정확도 및 측정 범위가 확대되는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.61-68
• /
• 2001

Turbine blade in nuclear plant is subject to cyclic bending fatigue by high steam pressure. Especially, fatigue fracture is caused by low stress below yielding stress. Photograph by SEM doesn't have striation but photograph by AFM has striation on the fatigue fractured surface of 12% Cr steel used in turbine blade. Surface roughness $R_q$ has the linear relation with respect to stress intensity factor range ΔK and is increased linearly according to load amplitude $\textit{\Delta}P$. In this study loading condition applied to turbine blade is predicted by the relation between the gradient of $R_q$ to $\textit{\Delta}K$ and load amplitude $\textit{\Delta}P$.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.87-95
• /
• 1989

본 연구에서는 국내산 비규칙성 짧은 섬유로 강회된 SMC 복합재료의 피로파괴 특성에 대한 기초자료로서 피로균열의 진전특성을 나타내는데 기존파괴 역학의 적용여부를 살펴보며, 서로 다른 피로모드 상태 하에서 하중크기의 상태에 따른 피로균열진전의 특성을 나타내었으며, 또한 주사형 전자현미경(scanning electron microscope)을 사용한 파단면 관찰을 통해 파괴 메카니즘을 살펴보았다.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.772-778
• /
• 2001

In this study, corrosion fatigue characteristics of 12Cr alloy steel were investigated in 3.5wt.% NaCl solution of 150$^{\circ}C$ and 4.5bar. Behavior of corrosion fatigue cracks was measured by the indirect compliance method and compared with the results in distilled water and in air. 1) 12Cr alloy steel was susceptible to temperature. Its susceptibility was increased as the temperature was increased. 2) The crack growth characteristics of 12Cr alloy steel in distilled water were similar to 3.5wt.% NaCl solution. 3) The temperature of solution affects to the crack growth characteristics of 12Cr alloy steel. In corrosion solutions of 4.5bar, 150$^{\circ}C$, fracture surfaces of corrosion fatigue crack growth at a/W=0.3 was showed the trans-granular fracture suface. As the crack grew up, it was changed to inter-granular type. In condition of high temperature, The crack growth behaviors of 12Cr alloy steel were remarkable.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.623-631
• /
• 2003

It is considered that the application of advanced composite materials to the prostheses for the disables is important to improve their bio-mechanical performance. Particularly, energy storing foot prosthesis is mostly important to restore gait ability of the disables with low-extremity amputation since it could provide propulsion at terminal stance enhancing the disables ability to walk long distance even run and jump. Therefore, the energy storing spring of Prosthetic foot keel under cyclic bending moment use mainly of high strength glass fiber reinforced plastic. The main objective of this study was to evaluate the stacking sequence effect using the delamination growth rate(dA$_{D}$/dN) of energy storing spring in glass fiber reinforced plastic under cyclic bending moment. The test results indicated that the shape of delamination zone depends on stacking sequence in GFRP laminates. Delamination area(A$_{D}$) turns out that variable types with the contour increased non-linearly toward the damage zones.nes.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.110-116
• /
• 2002

At elevated temperature, very complex precipitations occur in STS316. To investigate the effect of the precipitation on mechanical properties in SIS316, tensile tests and fatigue crack growth tests were carried out at $650^{\circ}C$ using artificially degraded materials. The material degradation was simulated by aging for up to 20000 hrs. at $750^{\circ}C$, which is equal to 179000hrs (about 20yrs) of service life at $650^{\circ}C$, after conducting solution treatment for 20 min. at $11300^{\circ}C$. The result of the hardness test and the tensile test showed that both properties are closely related to the mean free distance of carbides. Also, from the results of fracture tests at $650^{\circ}C$, ${\triangle}K_{th}$, after values were found to decrease as aging time and microstructure, as the volume fraction of $\sigma$ phase increased.

• 전산구조공학
• /
• 제11권1호
• /
• pp.161-170
• /
• 1998

길이가 긴 원통형 실린더를 구성하는 데에 사용될 조인트 부재에 대한 공차설계를 수행하였다. 즉, 원통형 실린더를 체결할 때 사용되는 조인트 부품 가운데 스터드 볼트를 최소 민감도해석에 의해 공차설계를 하였다. 조인트 부재의 공차설계를 위한 최소 민감도 해석에 의한 정식화는 목적함수가 폰 마이세스 응력의 공차에 대한 민감도이고, 여러 부등호 제약식 중에서 자중이 부등호 제안식에 포함된다. 조인트 부재의 경우 자중에 대한 타당한 부등호 제안식을 설정하기 위하여 우선 확정적인 경우에 대한 최적설계를 수행하여 그 범위값을 선정하였다. 원통형 부재의 구조 응답은 축대칭 유한요소로서 구조해석을 수행하여 제안식을 설정하였으며, 직접미분에 의해서 설계 민감도를 구하여 ,최적화 알고리즘과 결합하여 최적의 공차를 제시하였다.

• 한국식품과학회지
• /
• 제33권6호
• /
• pp.700-705
• /
• 2001

Sucrose첨가가 옥수수 전분호액의 레올로지 특성에 미치는 영향에 대하여 평가하였다. 전분호액은 sucrose 첨가에 관계없이 전단담화 비뉴턴 거동(n=0.37-0.58)을 나타내었으며, 또한 sucrose의 농도가 증가함에 따라 점조도지수$(K,\;K_h)$, 겉보기 점도$({\eta}_{a,100})$값은 크게 감소하였고 항복응력$({\sigma}_{oc},\;{\sigma}_h)$도 감소하는 경향을 나타내었다. 전분호액의 겉보기점도에 대한 온도의존성은 Arrhenius식에 의하여 높은 상관관계를 나타내었으며, 활성화에너지는 각각 10.80-15.59 kJ/mole을 나타내었고 농도가 증가함에 따라 감소하는 경향을 나타내었다. 적용된 주파수$({\omega})$ 범위에서 저장탄성률(G#)의 수치가 손실탄성률(G@)보다 높게 나타났으며 sucrose의 농도가 증가함에 따라 감소하여 탄성 및 점성 성질을 감소시켜 주었다. 이들 동적데이터로부터 전분호액은 sucrose 첨가에 의해 더욱 약한 겔과 같은 구조적 성질을 나타냄을 알 수 있었다. 그러므로 sucrose 첨가는 전분호액 내의 입자들의 재회합을 방해하여 전분호액의 레올로지 특성을 변화시킨다. Sucrose 30%를 첨가한 옥수수 전분호액을 제외한 모든 시료들은 이동인자$(shift\;factor,\;\alpha)$를 사용함으로써 Cox-Merz 중첩 원리에 잘 적용되었다.