• 전산구조공학
• /
• 제9권3호
• /
• pp.179-186
• /
• 1996

본 연구에서는 구조체의 위상학적 최적화를 위한 비선형 formulation(NLP)가 개발, 검토되었다. 이 NLP는 multiple-loading하에서 임의의 오브젝티브 함수, 응력, 변위 제약조건들을 쉽게 다룰 수가 있다. 또한 이 NLP는 해석과 최적화 디자인을 동시에 실시함으로써 요소 사이즈가 영으로 접근함에 따른 강성 매트릭스의 singularity를 피할 수 있다. 즉, 평형 방정식을 등제약조건으로 치환함으로써 강성 매트릭스 그 자체나 그의 역매트릭스를 구할 필요도 없어진다. 이 NLP는 multiple-loading conditon하에서 테스트되었으며, 이를 통해 이 NLP가 다양한 제약조건하에서 강력하게 작용함이 입증되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.67-72
• /
• 1992

The heat of hydration of cement causes the internal temperature rise at early age, particulary in massive concrete structures such as a footing of nuclear reactor building or a dam. As the result of the temperature rise and restraint of foundation, the thermal stress may induce cracks in concrete. Therefore, the prediction of the thermal stress is very important in the design and construction stages in order to control the cracks developed in massive concrete structures. And, in case of young concrete, creep effect by the temperature load is larger than That of old concrete. Thus the effect of creep must be considered for checking the cracks, serviceability, durability and leakage. This study is composed of two items. The first, it is to develop a finite element program which is capable of simulating the temperature history in mass concrete. The second, when the thermal stress of mass concrete structures considering creep is calculated by using the modified elastic modulus due to the inner temperature change. It is shown that the analytical results of this study is in comparably good agreement with JCI's analytical results.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.459-467
• /
• 2004

본 연구에서는 부분적 강성 변경이 연속적으로 필요한 경우, 전체 구조물을 재해석하지 않고도 관심을 두고 있는 변위와 부재력을 실시간 응답 수준에서 재계산할 수 있는 "적응형 부구조물화를 이용한 부분 재해석 알고리즘"을 제안한다. PRAS 알고리즘의 핵심 개념은, 1) 대상 구조물을 강성변경부분과 강성고정부분으로 구분하고, 2) 강성고정부분을 강성변경부재들이 연결된 잔류자유도만을 갖는 부구조물로 응축한 후, 3) 강성변경부재들과 강성고정부분 부구조물의 결합으로 전체 구조물을 모델랑함으로써, 최종 평형방정식의 잔류자유도수를 줄이는 데에 있다. 이 때 강성고정부분의 부구조물화 과정에서 본 연구에서 제시하는 또 하나의 알고리즘인 "적응형 부구조물화 알고리즘"을 적용하여 일단 초기 해석이 완료된 후에는 잔류자유도 구성이 달라질 때 다시 부구조물화에 소요되는 계산량을 최소화하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.102-109
• /
• 2001

In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. Thus, the computer program by the Probabilistic FEM is developed by incorporating the probabilistic concept into the conventional FEM method. This paper estimated for the reliability of a plane stress structure by Advanced First-Order Second Moment method using von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index and failure probability of attained by the Monte Carlo Simulation method with the von Mises criterion were same as PFEM, but the Monte Carlo Simulation were very time-consuming. The variance of member thickness and load could influence the reliability and failure probability most sensitively among the design variables from the results of the parameter analysis. And proper failure criterion must be used to design safely.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1325-1333
• /
• 2001

Critical defects in pressure vessels and pipes are generally found in the form of a semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. Furthermore, in addition to the traditional single parameter K or J-integral, the second parameter like T-stress should be measured to quantify the constraint effect. In this work, the validity of the line-spring finite element is investigated by comparing line-spring J-T solutions to the reference 3D finite element J-T solutions. A full 3D-mesh generating program for semi-elliptical surface cracks is employed to provide such reference 3D solutions. Then some structural characteristics of the surface-cracked T and L-joints are studied by mixed mode line-spring finite element. Negative T-stresses observed in T and L-joints indicate the necessity of J-T two parameter approach for analyses of surface-cracked T and L-joints.

• 한국재난정보학회 논문집
• /
• 제11권4호
• /
• pp.527-533
• /
• 2015

본 논문은 초기하중을 받는 역대칭 Cross-Ply 원통쉘의 동적특성을 고유진동수를 이용하여 해석하였다. 마주보는 두변이 단순지지된 적층 원통쉘의 운동방정식은 곡률항을 고려한 Mindlin 쉘이론과 에너지원리를 이용한 Rayleigh-Ritz법을 이용하여 유도하였다. 초기응력을 받는 적층쉘의 고유진동수, 임계좌굴계수 및 동적불안정영역 문제들을 무재하시의 무차원화 고유진동수로서 각각의 특성을 정립하였다. 본 연구에서 제안한 진동특성에 관한 간편산정식의 타당성과 사용성을 입증하기 위해 수치예를 들어 검토하였다.

• 한국농공학회지
• /
• 제39권1호
• /
• pp.112-121
• /
• 1997

The aim of this study was to analyze the slope stability relating to the failure of cut slopes and the characteristics of stress-strain relations obtained by limit equilibrium method, finite element method, and stereographic projection method for the reinforced cut slopes. The following conclusions were made : 1.To use stereographic projection method led to little possibility to take the toppling and wedge failure while to use the other methods led to the failure. It was recommended to reduce the slope inclination from 1:1 to 1: 1.5~1 :1.8 and adopt coir mesh method to protect the slope surface. position with the horizontal displacement after final excavation moved to the excavation base. The maximum shear strain values concentrated at the excavation base indicated the possibility to induce the local failure. 3. It was recommended that the slope inclination for blast rock with the slope height larger than l0m was 1: 0.5, 1:1, and 1: 1~1 :1.5 for hard rocks, soft and ordinary rocks, and ripping and soils, respectively. 4. Berm width criteria for blast rock with the slope height larger than l0m were recommended as follow : 2~3m per 20m slope height for hard rocks, 1 ~2m per l0m slope height for soft and ordinary rocks, 1 ~ l.5m per 5m slope height for ripping and soils.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.29-36
• /
• 2006

최근 이상기후 및 집중호우로 인해 낙동강유역의 많은 지역이 재산 및 인명손실을 크게 입고 있으며 제방축조 재료의 획득 및 운송비등의 증가로 인해 재해방지차원의 제방축조에 여러 가지 어려움을 겪고 있는 실정이다. 본 연구에서는 낙동강 하상의 모래를 이용하여 소량의 시멘트를 혼합한 시멘트혼합토에 대해 삼축압축실험을 통해 시멘트혼합율에 따른 특성을 규명하고자 한다. 이를 위하여 낙동강유역 하상 모래와 시멘트의 혼합율을 변화시키면서 실내시험을 실시하였다. 제체재료의 적합성 검토, 설계 및 해석에 필요한 기초자료를 제공하기위해 다짐시험 및 표준삼축압축시험을 실시하여 시멘트혼합율에 따른 강도, 변형에 따른 응력 및 거동특성 등을 분석하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.8-13
• /
• 2017

This paper proposes a hydraulic circuit for a Magnetorheological (MR) damper that can be used for semi-active and active controls. Methods are presented for obtaining reliable damping force displacement and velocity data, and hysteresis loop data corresponding to applied current. In order to get reliable data, analysis using electric and electronic software, a series of tests. and comparative evaluations are required. A hydraulic circuit model is proposed that can be applied to analyze a MR damper without any assumptions where the yield stress data according to the applied current are known. Analysis results of the proposed hydraulic circuit are confirmed by experimental results within acceptable tolerance. This hydraulic circuit model can be applied to various MR dampers and systems.

• 항공우주시스템공학회지
• /
• 제3권2호
• /
• pp.12-19
• /
• 2009

The research for the fatigue analysis is regarded greatly as important in aerospace field. Moreover, a study on the fatigue characteristic is very actively progressing. In this study, the fatigue life estimation was performed for Flaperon Joint which has FCL(fatigue critical location) of tilt-rotor UAV. The Flaperon Joint should be taken the various loads by several missions profiles of UAV. The fatigue load spectrum of Flaperon Joint is generated by the standard mission segment for the tilt-rotor UAV, and this spectrum is used for the fatigue test and analysis. The in-house fatigue analysis program is applied to calculate the fatigue life based on Stress-Life(S-N) method. The S-N curve is generated from the S-N data of Mil-Handbook by second order polynomial regression method. Moreover, the coefficient of determination is used to ensure how accuracy it has. In addition, the Goodman equation is used to consider the mean stress effect for evaluating more accurate fatigue life. Finally, the result of fatigue analysis is verified by comparing with the fatigue test result for the Flaperon Joint.