• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.500-503
• /
• 2011

본 연구에서는 Terrestrial Laser Scanning (TLS)를 이용한 보 구조물의 변위 및 응력 추정에 대한 기법을 개발하였다. TLS는 Geographic Informatio Systems (GIS) 분야에서 처음 도입된 시스템으로, 레이저 펄스를 통해 원격으로 목적물의 3차원 좌표 정보를 획득 할 수 있는 시스템이다. 그러나 이러한 TLS로부터 획득한 대상물의 3차원 좌표 데이터는 10mm 내외의 오차를 포함하고 있다. 이에 건축 구조분야에 적용 가능한 변형 정보를 획득하기 위해서는 보다 정밀한 데이터 획득을 위한 데이터 처리 기법이 필요하다. 또한 구조물의 응력의 경우 획득된 형상 위의 각 지점의 곡률로 인해 발생하기 때문에 구조물의 변형 추정시 보다 미세한 오차에도 크게 영향을 받아 심한 왜곡을 가져오게 된다. 그러므로 응력 추정시 추가적인 데이터 처리 기법이 필요하다. 이에 본 연구에서는 보 구조물의 응력을 추정할 수 있는 기법을 제시한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.90-99
• /
• 2002

The prediction of stress intensity factor(SIF) is one of the most important factors to analyse the propagation behavior of cracks in hull structural members. Up to now, however, simplified prediction method of SIF has not yet been established for the cracks experienced in large complex structures. As a first step to predict crack propagation behavior in a ship structure with very large structural redundancies, simplified SIF prediction formulas for various crack shapes were derived based on the results of the stress analysis under a non-crack condition in this study. The adequacy of the proposed method was then verified in comparison with other experimental and analysis results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.1
• /
• pp.1-10
• /
• 1989

The stress history of a bridge is different depending on the characteristic of traffic flow. Because the flow is varied with vehicle type, weight and headway time etc., statistical analysis in bridges is necessary to estimate the history by traffic flow. By applying the statistical analyses in fracture mechanics, the remaining service life of the structure can be estimated. In this paper, 1)the statistical analysis of vehicle type, weight and headway time etc. to analysis randomness of traffic flow, 2)measuring and analysis of stress history of a real bridge, 3)reappearance of stress history by Monte-Carlo Simulation using constitution ratio of vehicle type, weight and headway time as probabilitic variable, 4)comparision of the calculated and modelled stress history, 5)calculation of reduction factor, 6)comparision of frequency of stress range depending on span length etc. were performed. From the results, the basic modelled stress history which is necessary for the method of estimation of the remaining service life of the structure could be suggested.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.141-142
• /
• 2010

This study is related with assumption of stress block parameter for high-strength concrete. The equivalent stress distribution block of KCI design code isn't matched with the real stress distribution of high strength concrete. In this study, we tried to suggest new type of stress block parameter based on both previous test data and theoretical process.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.61-68
• /
• 2002

From the viewpoint of linear fracture mechanics, the crack propagation behavior of two different structures having the same K-a relationship could be considered identical. In this study the stress distribution in an infinitely wide cracked plate with the same K-a relationship as in a real structure is defined as the equivalent stress distribution. Fatigue life of a real structural element can be predicted by applying the equivalent stress distribution to a simple structural element, and performing a fatigue crack propagation analysis. The K-a relationship for a structural member can be estimated by a finite element method or a simplified prediction method. The validity to obtain effective crack driving stresses by using the equivalent stress-distribution is examined.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.25-38
• /
• 1987

The prediction of driving stresses in piles is necessary for optimum selection of driving hammers, better design of precast piles, enact assessment of drivabilities and complete description of piling specifications. However, the existing pile-driving formulas based on the theory of Newtonian impact have some defects and shortcomings; the numerical method by the wave equation analysis using electronic computer usually Involves various uncertainties and limitations which can yield erroneous outcomes because it employs soil constants of which the nature is unknown as essential parameters and ignores the effect of residual stresses set up in the pile .after each hammer blow; and the electronic measuring technique needs extra time and expense. The method developed herein is presented for the purpose of giving field engineers a reliable and convenient analytical procedure for the prediction of driving stresses along the full length of pile using the most effetive parameters without resort to electronic computer. This method is based on the fundamental mechanics of stress waves in elastic rods and takes into account the effect of residual stresses induced by reversed friction in piles.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.10-13
• /
• 1993

본 고에서는 불확정적 Approach에 의한 구조물 거동파악의 일례를 소개한다. 이 예에서는 극치통계와 엔트로피 최대원리를 이용하여, 부동침하를 받은 쉘구조물의 응력을 추정하는 이론을 취급한다. 부동침하는 불확정적 특성을 비교적 많이 지니고 있으며, 특히 구조물을 지지하고 있는 지반의 경우는 그 물리적 정수와 침하특성이 확정론적으로는 취급이 곤란한 경우가 많다고 생각된다. 구체적으로 극치통계법에서는 부동침하를 기초 Ring의 원주방향으로의 Fourier 계수로 가정하여, 위상각과 침하의 2승평균치가 확정치로 주어졌을 때, 진폭 Spectrum을 불확정변수로 간주하여 추정하는 방법을 소개한다. 일단 진폭 Spectrum이 구해지면 응력은 간단히 구해지므로 여기서는 Spectrum에 관해서만 언급하기로 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.289-297
• /
• 2012

This study proposes an experimental formula that can estimate the applied tensile stress of a bonded PSC by measuring a longitudinal stress wave velocity of tendon. To develop practical formula, the various bonded PSC specimens are constructed with different levels of prestresses. For all the bonded PSC specimens, the longitudinal impact-echo tests are repeated with various experimental conditions. Considering a few influence factors such as temperature, length and the number of strands, the application of the law of similarity results in a nondemensional experimental formula that could estimate existing tensile stress on tendon by measuring its longitudinal stress wave velocity. Next, a feasibility study of proposed approach has been conducted for a real reactor building containment. The estimated stress levels of two vertical tendons embedded in the nuclear plant are close to their design values.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.05a
• /
• pp.5-12
• /
• 1997

항공기, 자동차, 선박, 농기계 등의 동력전달장치에 많이 사용되고 있는 치차는 근대 공업의 발달과 함께 출력 향상을 위한 동력전달의 향상과 생에너지의 관점으로부터 경량화가 요구되어지고 있다. 이들의 요구에 부응하기 위하여 고경도의 신뢰성이 높은 치차설계가 필요하다. (중략)

• Geotechnical Engineering
• /
• v.7 no.3
• /
• pp.33-42
• /
• 1991

Increasing demand of rational analysis of dynamic soil behavior subjected to repetitive loading has evolved soil dynamics which is essential for proper design and/or analysis of dynamically loaded soil structure. In this paper, the stress-strain behavior of weathered granite soil under cyclic loading is stud- ied by measuring the strength and the strain before and after application of at least 11, 000 cycles of repetitive load. Relationships are suggested for predicting results of soil dynamics from those of soil statics.