• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.1
• /
• pp.79-85
• /
• 2011

Bridge Weigh-in-Motion(BWIM) system calculates a travelling vehicle's weight without interruption of traffic flow by analyzing the signals that are acquired from various sensors installed in the bridge. BWIM system or data accumulated from the BWIM system can be utilized to development of updated live load model for highway bridge design, fatigue load model for estimation of remaining life of bridges, etc. Field test with moving trucks including various load cases should be performed to guarantee successful development of precise BWIM system. In this paper, a numerical simulation technique is adopted as an alternative or supplement to the vehicle traveling test that is indispensible but expensive in time and budget. The constructed numerical model is validated by comparison experimentally measured signal with numerically generated signal. Also vehicles with various dynamic characteristics and travelling conditions are considered in numerical simulation to investigate the variation of bridge responses. Considered parameters in the numerical study are vehicle velocity, natural frequency of the vehicle, height of entry bump, and lateral position of the vehicle. By analyzing the results, it is revealed that the lateral position and natural frequency of the vehicle should be considered to increase precision of developing BWIM system. Since generation of vehicle travelling signal by the numerical simulation technique costs much less than field test, a large number of test parameters can effectively be considered to validate the developed BWIM algorithm. Also, when artificial neural network technique is applied, voluminous data set required for training and testing of the neural network can be prepared by numerical generation. Consequently, proposed numerical simulation technique may contribute to improve precision and performance of BWIM systems.

• Korean Journal of Culture and Social Issue
• /
• v.24 no.4
• /
• pp.563-592
• /
• 2018

In this research, it was examined whether the importance of value of self(i.e., self-referenced values) and the perceived importance of values of average Koreans(i.e., culture-referenced values) differ according to social class. In Study 1, differences in the importance of self-referenced values according to the social class of 1,140 adults aged over 19 years old were examined using Korean data from the World Values Survey. Findings showed that higher social class was associated with higher levels of Hedonism (which belongs to the individualistic value domain) and Benevolence, and lower levels of Tradition (which belongs to the collectivistic value domain) and Universalism. In Study 2, culture-referent questionnaires were added to examine the differences in self-referenced values and culture-referenced values according to social class. Findings showed that higher social class was associated with greater importance attached to individualistic value domain (namely, Power and Achievement), and as a result of Study 1, less importance attached to Benevolence towards the self. On the contrary, for culture-referent ratings, higher social class was associated with lower perceptions of the importance of individualistic value domain (namely, Self-direction and Hedonism) and greater importance attached to Tradition (which belongs to the collectivistic value domain) for average Koreans. These results suggest that the importance of self-referenced values and culture-referenced values differ by social class. The need for social class research taking into account culture and the importance of the culture-referent ratings is highlighted. Future directions for research are discussed.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.3
• /
• pp.707-714
• /
• 2015

The SF-36 is the most common instrument to check the quality of life for dialysis patients with chronic renal failure. However, there were too much burden for them to answer 36 items of it. So we purposed to develop the RFQoL-K reduced type of the SF-36. Participants who had newly registered for dialysis were enrolled in 29 medical centers during 45months from 2009. We developed the RFQoL-K through 355 people who applied the SF-36 at 3 and 12 months after registration and then checked it's internal validity. External validity about it was checked via 411 people who answered only one time survey after registration. In conclusion, the RFQoL-K had total 14 items which was consisted of 8 items on physical factors and 6 items on mental factors from the SF-36. The RFQoL-K summary scores explained 91-93% of the SF-36 summary scores. The RFQoL-K was well reflected SF-36 because the correlation and the internal consistency between two tools were very high 0.96 to 0.98 and 0.96 to 0.98 respectively.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.387-393
• /
• 2008

This study was undertaken to determine the halitosis status of urban area in Dae-Gu city. The sample of this study consisted of 332 persons who lived at Dae-Gu city. The results were as follows. 1. The persons consisted of 44.6% male and 55.4% female. The 32.5 % persons were under 38 years and 82.2% of persons were married. 2. The 26.8% persons answered the last meal time was before 1-2 hours and 63.3% persons answered middle halitosis. The 26.3% persons answered the time of worst halitosis was after breakfast and 33.1% persons answered the smell type of halitosis was nasty smell. The 11.4% persons experienced dental treatment for halitosis, and 63.9% persons required dental treatment for halitosis. 3. The 100 ppb~149 ppb concentration of halitosis was 156 persons. Over 150 ppb concentration of halitosis was 54 persons. The average of halitosis concentration was 122.76 ppb and, the 63.3% persons required halitosis management and treatment. An aged persons of the halitosis concentration was significantly increased than younger persons (p < 0.05). Higher smell preception of halitosis was significantly increased in halitosis concentration test practically (p < 0.001). Subjects who treated dental treatment for halitosis was significantly increased (p < 0.01). This study results have informed that the knowledge and management of halitosis was demand and required public relation for halitosis. The halitosis management and education program will improve the oral health. Therefore halitosis management program which based on data collection and planning will be developed and activated in further study.

• Journal of agricultural medicine and community health
• /
• v.34 no.2
• /
• pp.168-174
• /
• 2009

Objective: This study was conducted to investigate the hygienic state and awareness of drink vending machines in a city. Methods: Twelve of the most frequently used vending machines in various areas were selected in October 2008. As soon as fresh samples of milk coffee and adlay tea were collected in sterile containers from each machine, the temperature was measured. The samples were carried on ice to the laboratory to test total plate counts and Escherichia coli contamination. College students were inquired about drink vending machine hygiene by implementing self-developed questionnaires. Results: The temperature of 6 milk coffee samples (50.0%) and 8 adlay tea samples (66.7%) turned out to be inadequate. The total plate counts of milk coffee samples were all adequate, although 9 adlay tea samples (75.0%) were inadequate. All the beverage samples were negative for E. coli. In questionnaires obtained from 74 users of coffee vending machines, only 2 (2.7%) expected the hygienic state of vending machines to be good. There were 27 people (33.3%) that knew the existence of hygiene-related laws for vending machines. Conclusions: This study reveals that the hygienic state of drink vending machines insufficiently reaches the standard for the hot beverage and that most people are not aware of importance of vending machine hygiene. It is necessary to make improvement in the hygiene of vending machines and public awareness in this city.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.2
• /
• pp.95-108
• /
• 2021

Objective : This study aimed to develop prototypes of "smart stacking cones" by combining ICT to evaluate and train the upper extremity function and dual task performance in patients with central nervous system impairment, and to identify the complementary point to the completion of the device through a usability test. Methods : This prototype comprised of a hardware and software system that enabled the evaluation and training of patients and the management of data obtained from patients' performance. Specific measurement variables were established so that patient performance could be measured correctly. Based on the measurement variables, a the prototype included a 'single task evaluation modes', 'dual task evaluation mode', 'single task training mode', and 'dual task training modes'. Additionally, a usability test was conducted to assess clinical applicability and overall satisfaction for the prototype. Results : The results of the usability test were generally found to be appropriate. The 'content adequacy' in the usability test was the area with the highest level of adequacy and the lowest level of inadequacy. Additionally, overall 'satisfaction' in the usability test was the area with the highest appropriate and inappropriate levels. Hence, the overall satisfaction results were unstable. Conclusion : Future studies should be conducted to identify the clinical effectiveness of the device by applying an upgraded smart stacking cone to an actual patient group.

• The Mathematical Education
• /
• v.62 no.1
• /
• pp.79-93
• /
• 2023

This study used metaphors as a analysis tool to investigate elementary school students' formation and development of angle concepts. For this purpose, the students were asked to write words associated with angle, right angle, acute angle and obtuse angle and to explain why. In case of angle and right angle, responses of 268 students from 3rd to 6th graders were analyzed and for acute angle and obtuse angle, those of 192 students from 4th to 6th graders were examined. As the results of categorizing the metaphors, they can be classified into categories such as; (1) qualitative aspects: 'things metaphor', 'personality metaphor', 'emotions metaphor' etc., (2) quantitative aspects: 'motions metaphor', 'changes metaphor', 'emotions metaphor' etc., and (3) relational aspects: 'shape relations metaphor.' The metaphoric expressions were prominent in 'qualitative aspects' associated with shapes. As for the other aspects, 'quantitative aspect'- the size of angles and the amount of spread and 'relational aspects' - elements of angle and relationship with another shapes, the frequency increses were shown to as grade levels were up. In case of right angle and acute angle, 'qualitative aspects' associated with shapes were outstanding and the frequency of the metaphoric expressions of obtuse angle was distributed similarly in three aspects. As the figure strand and the measurement strand are integrated to an strand in the 2022 revised curriculum, we need more discussion of multifaced aspects of angle and the learning sequences in the 'figure and measurement' strand.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1244-1255
• /
• 2011

The purpose of this study was to compare the perception of meals and nutrition knowledge among high school students in Seoul. A survey was carried out on 548 male/female students in general and vocational high schools. The general high school students showed higher frequency of breakfast than the vocational high school students (p<0.001). As for the reasons for eating alone, the general high school students showed high frequency of 'busy', whereas the vocational high school students revealed high frequency of 'irregular meal times' (p<0.001). Concerning the habit of eating alone, 'irregular meal times (25.0%)', 'unbalanced diet (22.4%)', and 'instant food (16.6%)' were observed in that order (p<0.01). The percentage of high school students who regarded family meals as meals eaten with every member of their family was 70.6% (p<0.05). The percentage of general high school students who ate family meals was 61.8% and that of vocational high school students was 50.0% (p<0.01). When agreement with attitudes, environment, and participation in family meals was evaluated using a Likert scale (strongly agree 5 points, strongly disagree 1 point), the general high school students showed a higher level of agreement than the vocational high school students, and the results showed a significantly higher level of agreement as the frequency of family meals increased. Likewise, the groups who scored a higher level of nutrition knowledge had positive attitudes, environment, and participation in family meals with significant differences.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.572-583
• /
• 2012

In this study, we investigated visual fatigue in i3D system and basic factors that contribute to visual fatigue in the system. i3D is a type of glasses-free display which supports elementary manual interaction of users with the display. In Experiment 1, we performed open-ended survey of visual fatigue and collected responses from observers which then were used as survey questions for visual fatigue. The questions were validated by factor analysis from which we derived fatigue measurement scale. In Experiment 2, we measured visual fatigue in various conditions using survey questions obtained from Experiment 1. Using manual interaction (present/absent), viewing distance(1/2/4m), and viewing orientation($0/28/56^{\circ}$) as three factors in within-subject design, we measured visual fatigue in each condition. The results indicated that visual fatigue deceases with farther viewing distance, but viewing orientation and manual interaction does not influence visual fatigue. Although fatigue unexpectedly decreased in an extreme viewing condition (e.g., distance 1m, orientation $56^{\circ}$), the results were obtained because of technical limitation of glasses-free 3D display. General discussion provides discussion on limits of the current study and suggestions for future research.

• 재활복지
• /
• v.20 no.1
• /
• pp.211-233
• /
• 2016

The purpose of this study is to figure out problems and to suggest improvement scheme by examining 31 of the disabled who used power wheelchair developed for safe moving and standing support. The results are as follows. First, standing power wheelchair that enables the disabled to sit and stand up was developed. It can also be used as means of transportation for moving in narrow space and in a short distance. In the usability test of this prototype, two groups were respectively examined in 60 evaluation items. One group consisted of 16 people with disabilities using manual wheelchairs. And the other one consisted of 15 people with disabilities using automatic wheelchairs. The entire average figure of two groups was shown to be 2.72 and standard deviation was 0.820. Specifically, the average figure of the group in manual wheelchair was 2.85 and the one of the other group in automatic wheelchair was 2.57. And both group replied that the move to stand up and sit on both types of wheelchair was the most inconvenient thing. It shows why ergonomic design for persons with under extremity disabilities to stand up and sit is needed. Second, with further study based on the results of usability test of the disabled, it will make contribution to increase the quality of people with disabilities by helping them move and do daily lives on their own.