• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.871-877
• /
• 2001

Experimental study was conducted to investigate the effects of axial forcing on the flame structures near the nozzle exit of non-premixed flame. The most notable observation is that the direction of vortical motions is changed at some ranges, according to the increase of excitation amplitude. Especially, the elongation flame and the phenomenon of In-burning are always occurred when the vortical motion turnabout. In an analysis of the flame/flow visualization by means of direct photography and RMS technique, a plausible explanation can be made that above phenomena are related only to the amplitude of phase average velocity between the instantaneous velocity elements of excited flow.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1E
• /
• pp.50-55
• /
• 1992

팬의 익면 통과 주파수 소음은 총괄 소음 스펙트럼중에서 가장 명백한 성분이다. 그 소리는 일 반적으로 가장 불쾌한 성분이므로 저감이 요구된다. 따라서 그 소음치를 저감시키기 위해서는 정확한 축류형 팬의 소음원과 소음 방사 특성 규명이 요구된다. 본 연구에서는 푹류형 팬의 소음원과 소음 방 사 특성을 정의하였다. 음압 및 음향인텐시티를 이용한 음원 해석에서, 광센서를 이용한 축류형 팬의 동 기화가 수행되었고, 팬 날개에서의정확한 소음원의 위치를 결정하기 위해 Recording time의 결정이 제 안되었다. 팬 회전시, 소음원의 위치는 각 날개의 후단과 그 다음 날개의 선단사이에 각각 존재한다. 지 향성을 통하여 축류형 팬의 소음 방사 형태를 결정하였고, 벡터 에너지 흐름도로 음의 흐름을 가시화하 였다. 팬 익면에서의 회전 진동특성을 스트레인 게이지에 의하여 규명하였고, 또한 구조진동음의 음으로 의 기여도를 측정하였다. 또한 압전필름에 의한 팬 익면에서의 정압측정 가능성이 제시되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.63-63
• /
• 2004

기계류는 대개 부정형의 형상을 지니고 있으며, 또 표면이 모두 연결되어 있으므로, 진동하는 물체 표면상에서의 소음원 특성을 세밀히 파악하는 일은 매우 어려운 일이다. 음향 인텐시티나 공간 푸리에 변환을 이용하는 홀로그래피 기법 등의 어레이 마이크에 의한 기법들이 제안되었고 또 활용되고 있으나, 이는 어디까지나 음원에서 가까운 음장을 가상적인 음원면이라 보고 재구성하는 것이어서 실제 음원의 특성을 파악하는데 어려움이 있다. 이러한 문제점을 해결하기 위해 음원표면을 경계요소화 모델링을 하고, 어레이 마이크로 측정될 음장의 지점과 표면간의 관계를 수학적으로 정리한 후, 마이크에서 측정된 신호를 이용해 역으로 경계요소해석 계산을 수행하여 음원 특성을 파악하는 기법이 제안되었다. 본 발표에 있어서는 이와 같은 취지에서 ‘개발된 Inverse BEM을 이용한 NAH 기법’에 관한 개괄적인 내용을 설명하고, 그 적용 가능성 및 이 기법의 미래에 대해 설명하며, 다음과 같은 내용의 순서대로 설명된다: $\textbullet$ 각종 음원 파악 기법들의 특성과 이 방법이 필요한 이유 $\textbullet$일반 음향 holography 기법 (STSF)과의 차이점 $\textbullet$ 이론적 배경 개괄 $\textbullet$ 실제 적용 순서에 따른 방법의 설명 $\textbullet$ 후처리 결과물 $\textbullet$ 본 기법의 향후 과제 및 적용 방법의 개선

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.922-927
• /
• 1999

The objective of this paper is to obtain the contribution of each source to the spectrum of pressure, when there are multiple incoherent sources in near-field acoustic holography. For this objective, we have to obtain signals very coherent to the input signals of the sources. To obtain the very coherent signals, many people have measured pressure signals in the vincinity of the sources. However, it is sometimes difficult to locate microphones near to the sources so that the signals are very coherent to the input signals. This paper proposed a method to obtain the very coherent signals by near-field acoustic holography. Therefore, the proposed method does not require the measurement of pressure near to each source. Simulation results for two incoherent monopole sources showed the possibility of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.8
• /
• pp.409-414
• /
• 2007

In spite of many studies of the acoustic field visualization by using sonoluminescence phenomena, the visualization method has not been used widely because it needs high acoustic intensity to get the luminescence intensity enough to observe. Recently, the digital camera with high resolution and big memory makes it possible to get the digital image data even though the brightness of the image is too weak to observe with naked eyes. In this study we investigated the variation of sonoluminescence intensity with the acoustic intensity from an ultrasonic transducer. From this result, the inverse function, which makes the tendency of the variation to linear, was obtained. Using the order of the inverse function, we can expect a matching function. Applying the matching function to digital image data, the distribution of the histogram could be controlled appropriately and the image from relatively weak acoustic intensity could be enhanced by the method.

• Journal of the Korean Society of Visualization
• /
• v.14 no.1
• /
• pp.57-61
• /
• 2016

We report a finding of fast(exceeding 2,000 K/s) heating of polydimethylsiloxane(PDMS), one of the most commonly-used microchannel materials, under cyclic loadings at high(~MHz) frequencies. A microheater was created based on the finding. The heating mechanism utilized vibration damping of sound waves, which were generated and precisely manipulated using a conventional surface acoustic wave(SAW) microfluidic system, in PDMS. The penetration depths were measured to range from $210{\mu}m$ to $1290{\mu}m$, enough to cover most microchannel heights in microfluidic systems. The energy conversion efficiency was SAW frequency-dependent and measured to be the highest at around 30 MHz. Independent actuation of each interdigital transducer(IDT) enabled independent manipulation of SAWs, permitting spatiotemporal control of temperature on the microchip. All the advantages of this microheater facilitated a two-step continuous flow polymerase chain reaction(CFPCR) to achieve the billion-fold amplification of a 134 bp DNA amplicon in less than 3 min. In addition, a technique was developed for establishing dynamic free-form temperature gradients(TGs) in PDMS as well as in gases in contact with the PDMS.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.300-308
• /
• 2018

The contribution analysis of various external aeroacoustic noise sources to interior noise is important, enabling to design an automobile with a low interior noise level. With a new technique, the CD (Cholesky Decomposition), it is proposed to decompose an overall interior noise spectrum into multiple spectra, each representing the contribution of a specific noise source to the interior noise. In order to validate this method, three kinds of experiments were conducted. Furthermore, it is proposed to improve the CD-based contribution analysis method to be integrated with existing exterior microphone arrays in the wind tunnel. This method was validated with an experiment with two speakers.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.20-25
• /
• 2008

Acoustic holography exhibits the spatial distribution of sound pressure in time or frequency domain. The obtained picture often contains far more than what we need in practice. For example. when we need to know only the locations and overall propagation pattern of sound sources. a method to show only what we need has to be introduced. One way of obtaining the necessary information is to use envelope in space. The spatial envelope is a spatially slowly-varying amplitude of acoustic waves which contains the information of sources' location. A spatial modulation method has been theoretically developed to get a spatial envelope. By applying the spatial envelope. not only the necessary information is obtained but also computation time is reduced during the process of holography. The spatial envelope is verified as an effective visualization scheme in time domain by being applied to complicated sound fields.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.337-340
• /
• 2006

The present paper describes an experimental work to investigate a transonic resonance in supersonic jet that is discharged from a convergent-divergent nozzle. When the nozzle m: at low nozzle pressure ratios, the shock occurs within the divergent section of the nozzle. The transonic resonance of a jet flow is generated by an emission of strong acoustic tones due to the unsteadiness of the shock. A Schlieren optical system is used to visualize the supersonic jet flow In order to specify the flow resonance of a jet, acoustic measurements are performed to obtain noise spectra. The acoustic characteristics of transonic resonace are compared with those of screech tones. The results obtained show that unlike screech frequency, the transonic reso- nace frequency somewhat increases with increasing the nozzle pressure ratio.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1020-1025
• /
• 2002

This paper exploits how vortex noise is generated around a cylinder. This is done by utilizing an acoustic holography. In this experiment. compressed air was Infected to tile cylinder through a hose. Therefore, major noise sources were at a hose end as well as around the cylinder： vortex shedding noise. The holography results show a resultant noise picture there it is not easy to clearly sort out the shedding noise and what is generated at the end of the tube. We attempted to separate those noise by the method we developed : contribution analysis scheme. The method, in fact, was found to be efficient and practical to separate the noise field into independent noise sources. The highlights of the results are. we believe, that lift and drag noise picture are now available. This procedure does not limit its application. therefore we may use this to visualize any noise field that we want to understand.