• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.427-437
• /
• 2005

In this paper, the perceived audio level metering algorithm of digital audio sound to be able to operate in real-time is proposed. Through analyzing a conventional recommendation ITU-RBS1387-I for objective audio quality analysis, FFT-based loudness metering algorithm is implemented and the real-time method of that algorithm was advised and proved. The proposed method is based on look-up table. In order to prove the proved method, using 23 pure tones and 30 preselected digital audio samples, its performance and operation time is evaluated. Its performance, compared with an original algorithm's, have a good figure of less than $2\;\%$ error even if look-up table related with spectral spreading have large level resolution of $10\;\cal{dB}$. The proposed algorithm take only 1/21 of original algorithm's measuring time. Also, in the proposed algorithm auditory pitch group energy calculation take 1/450 of original algorithm's and excitation calculation take 1/3.57. In conclusion, the proposed algorithm is expected to be implemented into DSP-based real-time loudness meter.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.2
• /
• pp.133-155
• /
• 2022

The purpose of this study was to develop the indicatives for the analysis of the effects of Gyeonggi-do Book Sharing Project on pre-schoolers of supporter' reading care and thereby, suggest some data useful to the establishment of a reading culture promotion policy in Gyeonggi-do. Preceding studies and cases were reviewed to analyze the effects of the book-sharing project on pre-schoolers of supporter' reading care and thereby, develop some measurement indicatives, and thus, the indicatives were verified by professionals using the Delphi technique. Then, supporter of 3~5 year-old pre-schoolers were sampled from 7 cities and counties in Gyeonggi-do (Pocheon-si, Yangpyeong-gun, Yeoju-si, Dongducheon-si, Gapyeong-gun, Yeoncheon-gun and Yangju-si) to be divided into control and test groups and thereby, their reading care effect indicatives were compared before and after the test. The theoretical background is theory of family literacy, emergent literacy and parenting efficacy. As a result of developing the indicatives for analysis of pre-schoolers of supporter's reading care effects and comparing them for the sample pre-schoolers of supporter, before and after the test, the book-sharing project was found effective in improving reading care. The most difficult problem in pre-schoolers' earlier reading education involves acquisition of reading habit. So, it is deemed necessary to operate a regular book sharing project involving public organization and homes. As a result of developing the indicatives and analyzing the effects of the book-sharing project, it was confirmed that the project would serve to improve pre-schoolers of support's reading care and therefore, this study seems to provide some ground for the operation of a sustainable book-sharing project to narrow the education divide and promote a book reading culture in Gyeonggi-do.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.31-53
• /
• 1988

In this work we study extensively the structures and performance characteristics of the block least mean-square (BLMS) adaptive digital filters (ADF's) that can be realized efficiently using the fast Fourier transform (FFT). The weights of a BLMS ADF realized using the FFT can be adjusted either in the time domain or in the frequency domain, leading to the time-domain BLMS(TBLMS) algorithm or the frequency-domain BLMS (FBLMS) algorithm, respectively. In Part Ⅰof the paper, we first present new results on the overlap-add realization and the number-theoretic transform realization of the FBLMS ADF's. Then, we study how we can incorporate the concept of different frequency-weighting on the error signals and the self-orthogonalization of weight adjustment in the FBLMS ADF's , and also in the TBLMS ADF's. As a result, we show that the TBLMS ADF can also be made to have the same fast convergence speed as that of the self-orthogonalizing FBLMS ADF. Next, based on the properties of the sectioning operations in weight adjustment, we discuss unconstrained FBLMS algorithms that can reduce two FFT operations both for the overlap-save and overlap-add realizations. Finally, we investigate by computer simulation the effects of different parameter values and different algorithms on the convergence behaviors of the FBLMS and TBLMS ADF's. In Part Ⅱ of the paper, we will analyze the convergence characteristics of the TBLMS and FBLMS ADF's.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.35-43
• /
• 2004

Multibeam Echosounder system is the latest technology of a hydrographic survey utilized in producing an electronic nautical chart, obtaining a DEM with high precision, making a moving image by Swath surveying a wide area. As a fundamental study for improving the precision of MBES, we compared and analyzed measurements of DGPS and Motion sensor, and studied for the dynamic characteristics of vessel's movements. DGPS was installed in front and in the rear and on both side or the vessel and surveyed. The receiving precision of surveyed GPS results was obtained to the satisfactory extent that was possible to valuate the accuracy of Motion sensor as 0.0016$^{\circ}$ of the roll value and 0.0009$^{\circ}$ of the pitch value. The relationship between the values of heading, pitch, and roll in Motion sensor and the data of DGPS was proportional correlation. In addition, it is considered that deviations by elements like rapid turning and vibration of the vessel will be occurred, although the correlation of each deviation according to each amount or change is proportional. It is suitable that GPS installs in the central line of the vessel that is less affected than other places by waving because the amount of change in the tide level obtained from GPS survey and the value of heave are similar with the values taken by Motion sensor, and the velocity of GPS is different from installed places. The accuracy of the final result from MBES could be affected by the values of gyro and Motion sensor inputted to MBES processor because there were intervals of 15s and 13s of receiving time in gyro and Motion sensor respectively compared with the real-time measurements of DGPS.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.469-478
• /
• 2019

Multirotor configurations such as VTOL and urban air mobility have been focused on today due to the high maneuverability. Aerodynamic and aeroacoustic characteristics of multirotor have much difference to those of a single rotor. In this study, a numerical analysis based on the free wake vortex lattice method is used for identifying the wake interaction effect. In order to compare the various configurations and operating conditions, the effects of the spacing between the rotors in hovering flight and the effects of the advancing ratio and the formation in forward flight are discussed. In the hovering flight, the unsteady loading of multirotor changes periodically and loading fluctuation increases as decreasing the spacing. It causes the variation in unsteady loading noise and the noise directivity pattern. In the forward flight, the difference in loading fluctuation and noise characteristics are observed according to the diamond and square formation of rotors. By comparing with results of single rotor analysis, multirotor configurations have different directivity pattern and amplitude of loading noise according to the location of each rotor. As a result, wake interaction effect becomes a highly important factor for aerodynamic and aeroacoustic analysis according to multirotor configurations and operating conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.555-565
• /
• 2021

The goal of this study is to improve flow and noise performances of existing backward-curved blade centrifugal fan system used for circulating cold air in a refrigerator freezer by optimally designing airfoil shape. The unique characteristics of the system is to drive cold airflow with two volute tongues in combination with duct system in a back side of a refrigerator without scroll housing generally used in a typical centrifugal fan system. First, flow and noise performances of existing fan system were evaluated experimentally. A P-Q curve was obtained using a fan performance tester in the flow experiment, and noise spectrum was measured in an anechoic chamber in the noise experiment. Then, flow characteristics were numerically analyzed by solving the three-dimensional unsteady Navier-Stokes equations and noise analysis was performed by solving the Ffowcs Williams and Hawkins equation with input from the flow simulation results. The validity of numerical results was confirmed by comparing them with the measured ones. Based on the verified numerical method, blade inlet and outlet angles were optimized for maximum flow rate using the two-factor central composite design of the response surface method. Finally, the flow and noise performances of a prototype manufactured with the optimum design were experimentally evaluated, which showed the improvement in flow and noise performance.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.441-451
• /
• 2023

Ultrasound transducers are an essential component of combined photoacoustic and ultrasound imaging systems and play an important role in image evaluation. However, ultrasound transducers are opaque; therefore, light must bypass the ultrasound transducer to reach the target point to produce a photoacoustic image. Providing different paths for the optical and acoustic signals results in a complicated system design, increasing the system volume. To overcome these problems, an optically Transparent Ultrasound Transducer (TUT) was developed. Unlike conventional opaque ultrasound transducers, optically TUT can be fabricated by a variety of manufacturing methods and they are suitable for use with specific piezoelectric elements and serve various purposes. In this study, a comparative analysis of the results of using Lithium Niobate (LNO), Lead Magnesium Niobate-Lead Titanate (PMN-PT), and Polyvinylidene Difluoride (PVDF), which are materials used in piezoelectric element-based TUT. LNO is a piezoelectric element widely used in TUT, and PMN-PT has been actively studied recently with a higher transmission and reception rate than LNO. Existing TUT have lower ultrasound resolution than photoacoustic resolution, but they have recently been manufacturing focused TUT with high ultrasound resolution using PVDF. A comparative analysis of the production results of these TUT was performed.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.4
• /
• pp.159-165
• /
• 2007

In this paper, we propose a new pre-selection of candidate units that is suitable for the unit selection based Japanese TTS system. General pre-selection method performed by calculating a context-dependent cost within IP (Intonation Phrase). Different from other languages, however. Japanese has an accent represented as the height of a relative pitch, and several words form a single accentual phrase. Also. the prosody in Japanese changes in accentual phrase units. By reflecting such prosodic change in pre-selection. the qualify of synthesized speech can be improved. Furthermore, by calculating a context-dependent cost within accentual phrase, synthesis speed can be improved than calculating within intonation phrase. The proposed method defines AP. analyzes AP in context and performs pre-selection using accentual phrase matching which calculates CCL (connected context length) of the Phoneme's candidates that should be synthesized in each accentual phrase. The baseline system used in the proposed method is VoiceText, which is a synthesizer of Voiceware. Evaluations were made on perceptual error (intonation error, concatenation mismatch error) and synthesis time. Experimental result showed that the proposed method improved the qualify of synthesized speech. as well as shortened the synthesis time.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.